 PHP : Function Reference : Zlib Compression Functions : gzencode
Example 2723. Creating a gzip file
<?php
$data = implode("", file("bigfile.txt"));
$gzdata = gzencode($data, 9);
$fp = fopen("bigfile.txt.gz", "w");
fwrite($fp, $gzdata);
fclose($fp);
?>
henryk
Well, I was looking for a gzdecode too and didn't consider the temporary file example above to be very elegant.
However, as is noted in the very first comment: gzencode() only adds a 10 byte header.
I don't quite know what this header is supposed to be used for, but gzinflate() certainly doesn't like it, so I stripped it off:
function my_gzdecode($string) {
$string = substr($string, 10);
return gzinflate($string);
}
That's useful to read HTTP-Connections that were compressed by mod_gzip.
--
Henryk Plötz
Grüße aus Berlin
tychay
The 10 byte string in gzencode is the standard gzip header. The first two bytes (1f 8b) define the return as a gzip file, the third byte (08) means that the body is compressed using the "deflate" algorithm. The rest is padding (00)'s.
Technically, I believe one should check if the third byte is hex 08 and if so strip off the first ten bytes and last four bytes and run inflate on it. The last four bytes are file size and checksum bits.
In practice, you can get away with just stripping the first 10 bytes and running inflate on it.
Hope this helps,
terry
< supaplex %at% pcbkits %d0t% c0m >
I was almost discouraged when I didn't find a gzdecode() function! However, fear not, for I'll contribute my work... :)
function alt_gzdecode($str) {
// seed with microseconds since last "whole" second.
mt_srand((float)microtime()*1000000);
$eh="/tmp/php-" . md5(mt_rand(0,mt_getrandmax())) . ".gz";
$fd=fopen($eh,"w");
fwrite($fd,$str);
fclose($fd);
$fd = gzopen ($eh, "r");
$str=gzpassthru($fd);
unlink($eh);
return $str;
}
It's only ugly point is that it does not check to see if the file already exists. You may also have to adjust reference names like $str and $fd if they stomp on your code. (Sorry, but this is all you get atm! ;} ) If your conserned about a race condition, cry for a internal gzdecode() function that actualy functions...
I spent about 3 hours straight debugging this problem. I know the input data was valid, becuase I validated it with MD5() to compare to the md5's I had made of the input data before hand. I'm not sure whats up with gzuncompress or gzinflate, but this works in its place . . .
Enjoy!
mm.. oops? - amendum yes, tested hehe.
function alt_gzdecode($str) {
// seed with microseconds since last "whole" second
mt_srand((float)microtime()*1000000);
$eh="/tmp/php-" . md5(mt_rand(0,mt_getrandmax())) . ".gz";
$fd=fopen($eh,"w");
fwrite($fd,$str);
fclose($fd);
unset($str);
$fd = gzopen ($eh, "r");
while (1==1) {
$s=gzread($fd,10240);
if ("$s" == "") {
break;
}
$str=$str . $s;
}
unlink($eh);
return $str;
}
cbrunon
Correct is:
<?php
file_put_contents('output.gz', gzencode( file_get_contents('input.file'),9));
?>
aaron g.
<?php
function gzdecode($data) {
$len = strlen($data);
if ($len < 18 || strcmp(substr($data,0,2),"\x1f\x8b")) {
return null; // Not GZIP format (See RFC 1952)
}
$method = ord(substr($data,2,1)); // Compression method
$flags = ord(substr($data,3,1)); // Flags
if ($flags & 31 != $flags) {
// Reserved bits are set -- NOT ALLOWED by RFC 1952
return null;
}
// NOTE: $mtime may be negative (PHP integer limitations)
$mtime = unpack("V", substr($data,4,4));
$mtime = $mtime[1];
$xfl = substr($data,8,1);
$os = substr($data,8,1);
$headerlen = 10;
$extralen = 0;
$extra = "";
if ($flags & 4) {
// 2-byte length prefixed EXTRA data in header
if ($len - $headerlen - 2 < 8) {
return false; // Invalid format
}
$extralen = unpack("v",substr($data,8,2));
$extralen = $extralen[1];
if ($len - $headerlen - 2 - $extralen < 8) {
return false; // Invalid format
}
$extra = substr($data,10,$extralen);
$headerlen += 2 + $extralen;
}
$filenamelen = 0;
$filename = "";
if ($flags & 8) {
// C-style string file NAME data in header
if ($len - $headerlen - 1 < 8) {
return false; // Invalid format
}
$filenamelen = strpos(substr($data,8+$extralen),chr(0));
if ($filenamelen === false || $len - $headerlen - $filenamelen - 1 < 8) {
return false; // Invalid format
}
$filename = substr($data,$headerlen,$filenamelen);
$headerlen += $filenamelen + 1;
}
$commentlen = 0;
$comment = "";
if ($flags & 16) {
// C-style string COMMENT data in header
if ($len - $headerlen - 1 < 8) {
return false; // Invalid format
}
$commentlen = strpos(substr($data,8+$extralen+$filenamelen),chr(0));
if ($commentlen === false || $len - $headerlen - $commentlen - 1 < 8) {
return false; // Invalid header format
}
$comment = substr($data,$headerlen,$commentlen);
$headerlen += $commentlen + 1;
}
$headercrc = "";
if ($flags & 1) {
// 2-bytes (lowest order) of CRC32 on header present
if ($len - $headerlen - 2 < 8) {
return false; // Invalid format
}
$calccrc = crc32(substr($data,0,$headerlen)) & 0xffff;
$headercrc = unpack("v", substr($data,$headerlen,2));
$headercrc = $headercrc[1];
if ($headercrc != $calccrc) {
return false; // Bad header CRC
}
$headerlen += 2;
}
// GZIP FOOTER - These be negative due to PHP's limitations
$datacrc = unpack("V",substr($data,-8,4));
$datacrc = $datacrc[1];
$isize = unpack("V",substr($data,-4));
$isize = $isize[1];
// Perform the decompression:
$bodylen = $len-$headerlen-8;
if ($bodylen < 1) {
// This should never happen - IMPLEMENTATION BUG!
return null;
}
$body = substr($data,$headerlen,$bodylen);
$data = "";
if ($bodylen > 0) {
switch ($method) {
case 8:
// Currently the only supported compression method:
$data = gzinflate($body);
break;
default:
// Unknown compression method
return false;
}
} else {
// I'm not sure if zero-byte body content is allowed.
// Allow it for now... Do nothing...
}
// Verifiy decompressed size and CRC32:
// NOTE: This may fail with large data sizes depending on how
// PHP's integer limitations affect strlen() since $isize
// may be negative for large sizes.
if ($isize != strlen($data) || crc32($data) != $datacrc) {
// Bad format! Length or CRC doesn't match!
return false;
}
return $data;
}
?>
|
|
Bookmark this on Delicious
Share on Facebook
Slashdot It!
Digg 
