Function Reference

Table of Contents

I. .NET

dotnet_load — Loads a DOTNET module

II. Apache

apache_child_terminate — Terminate apache process after this request

apache_get_modules — Get a list of loaded Apache modules

apache_get_version — Fetch Apache version

apache_getenv — Get an Apache subprocess_env variable

apache_lookup_uri — Perform a partial request for the specified URI and return all info about it

apache_note — Get and set apache request notes

apache_request_headers — Fetch all HTTP request headers

apache_reset_timeout — Reset the Apache write timer

apache_response_headers — Fetch all HTTP response headers

apache_setenv — Set an Apache subprocess_env variable

ascii2ebcdic — Translate string from ASCII to EBCDIC

ebcdic2ascii — Translate string from EBCDIC to ASCII

getallheaders — Fetch all HTTP request headers

virtual — Perform an Apache sub-request

III. APC

apc_add — Cache a variable in the data store (only if it's not stored)

apc_cache_info — Retrieves cached information (and meta-data) from APC's data store

apc_clear_cache — Clears the APC cache

apc_compile_file — Stores a file in the bytecode cache, bypassing all filters.

apc_define_constants — Defines a set of constants for retrieval and mass-definition

apc_delete — Removes a stored variable from the cache

apc_fetch — Fetch a stored variable from the cache

apc_load_constants — Loads a set of constants from the cache

apc_sma_info — Retrieves APC's Shared Memory Allocation information

apc_store — Cache a variable in the data store

IV. APD

apd_breakpoint — Stops the interpreter and waits on a CR from the socket

apd_callstack — Returns the current call stack as an array

apd_clunk — Throw a warning and a callstack

apd_continue — Restarts the interpreter

apd_croak — Throw an error, a callstack and then exit

apd_dump_function_table — Outputs the current function table

apd_dump_persistent_resources — Return all persistent resources as an array

apd_dump_regular_resources — Return all current regular resources as an array

apd_echo — Echo to the debugging socket

apd_get_active_symbols — Get an array of the current variables names in the local scope

apd_set_pprof_trace — Starts the session debugging

apd_set_session_trace — Starts the session debugging

apd_set_session — Changes or sets the current debugging level

apd_set_socket_session_trace — Starts the remote session debugging

override_function — Overrides built-in functions

rename_function — Renames orig_name to new_name in the global function table

V. Arrays

array_change_key_case — Changes all keys in an array

array_chunk — Split an array into chunks

array_combine — Creates an array by using one array for keys and another for its values

array_count_values — Counts all the values of an array

array_diff_assoc — Computes the difference of arrays with additional index check

array_diff_key — Computes the difference of arrays using keys for comparison

array_diff_uassoc — Computes the difference of arrays with additional index check which is performed by a user supplied callback function

array_diff_ukey — Computes the difference of arrays using a callback function on the keys for comparison

array_diff — Computes the difference of arrays

array_fill_keys — Fill an array with values, specifying keys

array_fill — Fill an array with values

array_filter — Filters elements of an array using a callback function

array_flip — Exchanges all keys with their associated values in an array

array_intersect_assoc — Computes the intersection of arrays with additional index check

array_intersect_key — Computes the intersection of arrays using keys for comparison

array_intersect_uassoc — Computes the intersection of arrays with additional index check, compares indexes by a callback function

array_intersect_ukey — Computes the intersection of arrays using a callback function on the keys for comparison

array_intersect — Computes the intersection of arrays

array_key_exists — Checks if the given key or index exists in the array

array_keys — Return all the keys of an array

array_map — Applies the callback to the elements of the given arrays

array_merge_recursive — Merge two or more arrays recursively

array_merge — Merge one or more arrays

array_multisort — Sort multiple or multi-dimensional arrays

array_pad — Pad array to the specified length with a value

array_pop — Pop the element off the end of array

array_product — Calculate the product of values in an array

array_push — Push one or more elements onto the end of array

array_rand — Pick one or more random entries out of an array

array_reduce — Iteratively reduce the array to a single value using a callback function

array_reverse — Return an array with elements in reverse order

array_search — Searches the array for a given value and returns the corresponding key if successful

array_shift — Shift an element off the beginning of array

array_slice — Extract a slice of the array

array_splice — Remove a portion of the array and replace it with something else

array_sum — Calculate the sum of values in an array

array_udiff_assoc — Computes the difference of arrays with additional index check, compares data by a callback function

array_udiff_uassoc — Computes the difference of arrays with additional index check, compares data and indexes by a callback function

array_udiff — Computes the difference of arrays by using a callback function for data comparison

array_uintersect_assoc — Computes the intersection of arrays with additional index check, compares data by a callback function

array_uintersect_uassoc — Computes the intersection of arrays with additional index check, compares data and indexes by a callback functions

array_uintersect — Computes the intersection of arrays, compares data by a callback function

array_unique — Removes duplicate values from an array

array_unshift — Prepend one or more elements to the beginning of an array

array_values — Return all the values of an array

array_walk_recursive — Apply a user function recursively to every member of an array

array_walk — Apply a user function to every member of an array

array — Create an array

arsort — Sort an array in reverse order and maintain index association

asort — Sort an array and maintain index association

compact — Create array containing variables and their values

count — Count elements in an array, or properties in an object

current — Return the current element in an array

each — Return the current key and value pair from an array and advance the array cursor

end — Set the internal pointer of an array to its last element

extract — Import variables into the current symbol table from an array

in_array — Checks if a value exists in an array

key — Fetch a key from an associative array

krsort — Sort an array by key in reverse order

ksort — Sort an array by key

list — Assign variables as if they were an array

natcasesort — Sort an array using a case insensitive "natural order" algorithm

natsort — Sort an array using a "natural order" algorithm

next — Advance the internal array pointer of an array

pos — Alias of current()

prev — Rewind the internal array pointer

range — Create an array containing a range of elements

reset — Set the internal pointer of an array to its first element

rsort — Sort an array in reverse order

shuffle — Shuffle an array

sizeof — Alias of count()

sort — Sort an array

uasort — Sort an array with a user-defined comparison function and maintain index association

uksort — Sort an array by keys using a user-defined comparison function

usort — Sort an array by values using a user-defined comparison function

VI. Aspell

aspell_check_raw — Check a word without changing its case or trying to trim it [deprecated]

aspell_check — Check a word [deprecated]

aspell_new — Load a new dictionary [deprecated]

aspell_suggest — Suggest spellings of a word [deprecated]

VII. BBCode

bbcode_add_element — Adds a bbcode element

bbcode_add_smiley — Adds a smiley to the parser

bbcode_create — Create a BBCode Resource

bbcode_destroy — Close BBCode_container resource

bbcode_parse — Parse a string following a given rule set

bbcode_set_arg_parser — Attach another parser in order to use another rule set for argument parsing

bbcode_set_flags — Set or alter parser options

VIII. BC math

bcadd — Add two arbitrary precision numbers

bccomp — Compare two arbitrary precision numbers

bcdiv — Divide two arbitrary precision numbers

bcmod — Get modulus of an arbitrary precision number

bcmul — Multiply two arbitrary precision number

bcpow — Raise an arbitrary precision number to another

bcpowmod — Raise an arbitrary precision number to another, reduced by a specified modulus

bcscale — Set default scale parameter for all bc math functions

bcsqrt — Get the square root of an arbitrary precision number

bcsub — Subtract one arbitrary precision number from another

IX. bcompiler

bcompiler_load_exe — Reads and creates classes from a bcompiler exe file

bcompiler_load — Reads and creates classes from a bz compressed file

bcompiler_parse_class — Reads the bytecodes of a class and calls back to a user function

bcompiler_read — Reads and creates classes from a filehandle

bcompiler_write_class — Writes an defined class as bytecodes

bcompiler_write_constant — Writes a defined constant as bytecodes

bcompiler_write_exe_footer — Writes the start pos, and sig to the end of a exe type file

bcompiler_write_file — Writes a php source file as bytecodes

bcompiler_write_footer — Writes the single character \x00 to indicate End of compiled data

bcompiler_write_function — Writes an defined function as bytecodes

bcompiler_write_functions_from_file — Writes all functions defined in a file as bytecodes

bcompiler_write_header — Writes the bcompiler header

bcompiler_write_included_filename — Writes an included file as bytecodes

X. Bzip2

bzclose — Close a bzip2 file

bzcompress — Compress a string into bzip2 encoded data

bzdecompress — Decompresses bzip2 encoded data

bzerrno — Returns a bzip2 error number

bzerror — Returns the bzip2 error number and error string in an array

bzerrstr — Returns a bzip2 error string

bzflush — Force a write of all buffered data

bzopen — Opens a bzip2 compressed file

bzread — Binary safe bzip2 file read

bzwrite — Binary safe bzip2 file write

XI. Calendar

cal_days_in_month — Return the number of days in a month for a given year and calendar

cal_from_jd — Converts from Julian Day Count to a supported calendar

cal_info — Returns information about a particular calendar

cal_to_jd — Converts from a supported calendar to Julian Day Count

easter_date — Get Unix timestamp for midnight on Easter of a given year

easter_days — Get number of days after March 21 on which Easter falls for a given year

FrenchToJD — Converts a date from the French Republican Calendar to a Julian Day Count

GregorianToJD — Converts a Gregorian date to Julian Day Count

JDDayOfWeek — Returns the day of the week

JDMonthName — Returns a month name

JDToFrench — Converts a Julian Day Count to the French Republican Calendar

JDToGregorian — Converts Julian Day Count to Gregorian date

jdtojewish — Converts a Julian day count to a Jewish calendar date

JDToJulian — Converts a Julian Day Count to a Julian Calendar Date

jdtounix — Convert Julian Day to Unix timestamp

JewishToJD — Converts a date in the Jewish Calendar to Julian Day Count

JulianToJD — Converts a Julian Calendar date to Julian Day Count

unixtojd — Convert Unix timestamp to Julian Day

XII. CCVS

ccvs_add — Add data to a transaction

ccvs_auth — Perform credit authorization test on a transaction

ccvs_command — Performs a command which is peculiar to a single protocol, and thus is not available in the general CCVS API

ccvs_count — Find out how many transactions of a given type are stored in the system

ccvs_delete — Delete a transaction

ccvs_done — Terminate CCVS engine and do cleanup work

ccvs_init — Initialize CCVS for use

ccvs_lookup — Look up an item of a particular type in the database #

ccvs_new — Create a new, blank transaction

ccvs_report — Return the status of the background communication process

ccvs_return — Transfer funds from the merchant to the credit card holder

ccvs_reverse — Perform a full reversal on an already-processed authorization

ccvs_sale — Transfer funds from the credit card holder to the merchant

ccvs_status — Check the status of an invoice

ccvs_textvalue — Get text return value for previous function call

ccvs_void — Perform a full reversal on a completed transaction

XIII. Classes/Objects

call_user_method_array — Call a user method given with an array of parameters [deprecated]

call_user_method — Call a user method on an specific object [deprecated]

class_exists — Checks if the class has been defined

get_class_methods — Gets the class methods' names

get_class_vars — Get the default properties of the class

get_class — Returns the name of the class of an object

get_declared_classes — Returns an array with the name of the defined classes

get_declared_interfaces — Returns an array of all declared interfaces

get_object_vars — Gets the properties of the given object

get_parent_class — Retrieves the parent class name for object or class

interface_exists — Checks if the interface has been defined

is_a — Checks if the object is of this class or has this class as one of its parents

is_subclass_of — Checks if the object has this class as one of its parents

method_exists — Checks if the class method exists

property_exists — Checks if the object or class has a property

XIV. Classkit

classkit_import — Import new class method definitions from a file

classkit_method_add — Dynamically adds a new method to a given class

classkit_method_copy — Copies a method from class to another

classkit_method_redefine — Dynamically changes the code of the given method

classkit_method_remove — Dynamically removes the given method

classkit_method_rename — Dynamically changes the name of the given method

XV. ClibPDF

cpdf_add_annotation — Adds annotation

cpdf_add_outline — Adds bookmark for current page

cpdf_arc — Draws an arc

cpdf_begin_text — Starts text section

cpdf_circle — Draw a circle

cpdf_clip — Clips to current path

cpdf_close — Closes the pdf document

cpdf_closepath_fill_stroke — Close, fill and stroke current path

cpdf_closepath_stroke — Close path and draw line along path

cpdf_closepath — Close path

cpdf_continue_text — Output text in next line

cpdf_curveto — Draws a curve

cpdf_end_text — Ends text section

cpdf_fill_stroke — Fill and stroke current path

cpdf_fill — Fill current path

cpdf_finalize_page — Ends page

cpdf_finalize — Ends document

cpdf_global_set_document_limits — Sets document limits for any pdf document

cpdf_import_jpeg — Opens a JPEG image

cpdf_lineto — Draws a line

cpdf_moveto — Sets current point

cpdf_newpath — Starts a new path

cpdf_open — Opens a new pdf document

cpdf_output_buffer — Outputs the pdf document in memory buffer

cpdf_page_init — Starts new page

cpdf_place_inline_image — Places an image on the page

cpdf_rect — Draw a rectangle

cpdf_restore — Restores formerly saved environment

cpdf_rlineto — Draws a line

cpdf_rmoveto — Sets current point

cpdf_rotate_text — Sets text rotation angle

cpdf_rotate — Sets rotation

cpdf_save_to_file — Writes the pdf document into a file

cpdf_save — Saves current environment

cpdf_scale — Sets scaling

cpdf_set_action_url — Sets hyperlink

cpdf_set_char_spacing — Sets character spacing

cpdf_set_creator — Sets the creator field in the pdf document

cpdf_set_current_page — Sets current page

cpdf_set_font_directories — Sets directories to search when using external fonts

cpdf_set_font_map_file — Sets fontname to filename translation map when using external fonts

cpdf_set_font — Select the current font face and size

cpdf_set_horiz_scaling — Sets horizontal scaling of text

cpdf_set_keywords — Sets the keywords field of the pdf document

cpdf_set_leading — Sets distance between text lines

cpdf_set_page_animation — Sets duration between pages

cpdf_set_subject — Sets the subject field of the pdf document

cpdf_set_text_matrix — Sets the text matrix

cpdf_set_text_pos — Sets text position

cpdf_set_text_rendering — Determines how text is rendered

cpdf_set_text_rise — Sets the text rise

cpdf_set_title — Sets the title field of the pdf document

cpdf_set_viewer_preferences — How to show the document in the viewer

cpdf_set_word_spacing — Sets spacing between words

cpdf_setdash — Sets dash pattern

cpdf_setflat — Sets flatness

cpdf_setgray_fill — Sets filling color to gray value

cpdf_setgray_stroke — Sets drawing color to gray value

cpdf_setgray — Sets drawing and filling color to gray value

cpdf_setlinecap — Sets linecap parameter

cpdf_setlinejoin — Sets linejoin parameter

cpdf_setlinewidth — Sets line width

cpdf_setmiterlimit — Sets miter limit

cpdf_setrgbcolor_fill — Sets filling color to rgb color value

cpdf_setrgbcolor_stroke — Sets drawing color to rgb color value

cpdf_setrgbcolor — Sets drawing and filling color to rgb color value

cpdf_show_xy — Output text at position

cpdf_show — Output text at current position

cpdf_stringwidth — Returns width of text in current font

cpdf_stroke — Draw line along path

cpdf_text — Output text with parameters

cpdf_translate — Sets origin of coordinate system

XVI. COM

COM — COM class

DOTNET — DOTNET class

VARIANT — VARIANT class

com_addref — Increases the components reference counter [deprecated]

com_create_guid — Generate a globally unique identifier (GUID)

com_event_sink — Connect events from a COM object to a PHP object

com_get_active_object — Returns a handle to an already running instance of a COM object

com_get — Gets the value of a COM Component's property [deprecated]

com_invoke — Calls a COM component's method [deprecated]

com_isenum — Indicates if a COM object has an IEnumVariant interface for iteration [deprecated]

com_load_typelib — Loads a Typelib

com_load — Creates a new reference to a COM component [deprecated]

com_message_pump — Process COM messages, sleeping for up to timeoutms milliseconds

com_print_typeinfo — Print out a PHP class definition for a dispatchable interface

com_propget — Alias of com_get()

com_propput — Alias of com_set()

com_propset — Alias of com_set()

com_release — Decreases the components reference counter [deprecated]

com_set — Assigns a value to a COM component's property

variant_abs — Returns the absolute value of a variant

variant_add — "Adds" two variant values together and returns the result

variant_and — performs a bitwise AND operation between two variants and returns the result

variant_cast — Convert a variant into a new variant object of another type

variant_cat — concatenates two variant values together and returns the result

variant_cmp — Compares two variants

variant_date_from_timestamp — Returns a variant date representation of a Unix timestamp

variant_date_to_timestamp — Converts a variant date/time value to Unix timestamp

variant_div — Returns the result from dividing two variants

variant_eqv — Performs a bitwise equivalence on two variants

variant_fix — Returns the integer portion ? of a variant

variant_get_type — Returns the type of a variant object

variant_idiv — Converts variants to integers and then returns the result from dividing them

variant_imp — Performs a bitwise implication on two variants

variant_int — Returns the integer portion of a variant

variant_mod — Divides two variants and returns only the remainder

variant_mul — multiplies the values of the two variants and returns the result

variant_neg — Performs logical negation on a variant

variant_not — Performs bitwise not negation on a variant

variant_or — Performs a logical disjunction on two variants

variant_pow — Returns the result of performing the power function with two variants

variant_round — Rounds a variant to the specified number of decimal places

variant_set_type — Convert a variant into another type "in-place"

variant_set — Assigns a new value for a variant object

variant_sub — subtracts the value of the right variant from the left variant value and returns the result

variant_xor — Performs a logical exclusion on two variants

XVII. Crack

crack_check — Performs an obscure check with the given password

crack_closedict — Closes an open CrackLib dictionary

crack_getlastmessage — Returns the message from the last obscure check

crack_opendict — Opens a new CrackLib dictionary

XVIII. ctype

ctype_alnum — Check for alphanumeric character(s)

ctype_alpha — Check for alphabetic character(s)

ctype_cntrl — Check for control character(s)

ctype_digit — Check for numeric character(s)

ctype_graph — Check for any printable character(s) except space

ctype_lower — Check for lowercase character(s)

ctype_print — Check for printable character(s)

ctype_punct — Check for any printable character which is not whitespace or an alphanumeric character

ctype_space — Check for whitespace character(s)

ctype_upper — Check for uppercase character(s)

ctype_xdigit — Check for character(s) representing a hexadecimal digit

XIX. CURL

Constants — Curl Predefined Constants

curl_close — Close a cURL session

curl_copy_handle — Copy a cURL handle along with all of its preferences

curl_errno — Return the last error number

curl_error — Return a string containing the last error for the current session

curl_exec — Perform a cURL session

curl_getinfo — Get information regarding a specific transfer

curl_init — Initialize a cURL session

curl_multi_add_handle — Add a normal cURL handle to a cURL multi handle

curl_multi_close — Close a set of cURL handles

curl_multi_exec — Run the sub-connections of the current cURL handle

curl_multi_getcontent — Return the content of a cURL handle if CURLOPT_RETURNTRANSFER is set

curl_multi_info_read — Get information about the current transfers

curl_multi_init — Returns a new cURL multi handle

curl_multi_remove_handle — Remove a multi handle from a set of cURL handles

curl_multi_select — Get all the sockets associated with the cURL extension, which can then be "selected"

curl_setopt_array — Set multiple options for a cURL transfer

curl_setopt — Set an option for a cURL transfer

curl_version — Gets cURL version information

XX. Cybercash

cybercash_base64_decode — base64 decode data for Cybercash

cybercash_base64_encode — base64 encode data for Cybercash

cybercash_decr — Cybercash decrypt

cybercash_encr — Cybercash encrypt

XXI. CyberMUT

cybermut_creerformulairecm — Generate HTML form of request for payment

cybermut_creerreponsecm — Generate the delivery's acknowledgement of the payment's confirmation

cybermut_testmac — Make sure that there was no data diddling contained in the received message of confirmation

XXII. Cyrus IMAP

cyrus_authenticate — Authenticate against a Cyrus IMAP server

cyrus_bind — Bind callbacks to a Cyrus IMAP connection

cyrus_close — Close connection to a Cyrus IMAP server

cyrus_connect — Connect to a Cyrus IMAP server

cyrus_query — Send a query to a Cyrus IMAP server

cyrus_unbind — Unbind ...

XXIII. Date/Time

checkdate — Validate a Gregorian date

date_create — Returns new DateTime object

date_date_set — Sets the date

date_default_timezone_get — Gets the default timezone used by all date/time functions in a script

date_default_timezone_set — Sets the default timezone used by all date/time functions in a script

date_format — Returns date formatted according to given format

date_isodate_set — Sets the ISO date

date_modify — Alters the timestamp

date_offset_get — Returns the daylight saving time offset

date_parse — Returns associative array with detailed info about given date

date_sun_info — Returns an array with information about sunset/sunrise and twilight begin/end

date_sunrise — Returns time of sunrise for a given day and location

date_sunset — Returns time of sunset for a given day and location

date_time_set — Sets the time

date_timezone_get — Return time zone relative to given DateTime

date_timezone_set — Sets the time zone for the DateTime object

date — Format a local time/date

getdate — Get date/time information

gettimeofday — Get current time

gmdate — Format a GMT/UTC date/time

gmmktime — Get Unix timestamp for a GMT date

gmstrftime — Format a GMT/UTC time/date according to locale settings

idate — Format a local time/date as integer

localtime — Get the local time

microtime — Return current Unix timestamp with microseconds

mktime — Get Unix timestamp for a date

strftime — Format a local time/date according to locale settings

strptime — Parse a time/date generated with strftime()

strtotime — Parse about any English textual datetime description into a Unix timestamp

time — Return current Unix timestamp

timezone_abbreviations_list — Returns associative array containing dst, offset and the timezone name

timezone_identifiers_list — Returns numerically index array with all timezone identifiers

timezone_name_from_abbr — Returns the timezone name from abbrevation

timezone_name_get — Returns the name of the timezone

timezone_offset_get — Returns the timezone offset from GMT

timezone_open — Returns new DateTimeZone object

timezone_transitions_get — Returns all transitions for the timezone

XXIV. DB++

dbplus_add — Add a tuple to a relation

dbplus_aql — Perform AQL query

dbplus_chdir — Get/Set database virtual current directory

dbplus_close — Close a relation

dbplus_curr — Get current tuple from relation

dbplus_errcode — Get error string for given errorcode or last error

dbplus_errno — Get error code for last operation

dbplus_find — Set a constraint on a relation

dbplus_first — Get first tuple from relation

dbplus_flush — Flush all changes made on a relation

dbplus_freealllocks — Free all locks held by this client

dbplus_freelock — Release write lock on tuple

dbplus_freerlocks — Free all tuple locks on given relation

dbplus_getlock — Get a write lock on a tuple

dbplus_getunique — Get an id number unique to a relation

dbplus_info — Get information about a relation

dbplus_last — Get last tuple from relation

dbplus_lockrel — Request write lock on relation

dbplus_next — Get next tuple from relation

dbplus_open — Open relation file

dbplus_prev — Get previous tuple from relation

dbplus_rchperm — Change relation permissions

dbplus_rcreate — Creates a new DB++ relation

dbplus_rcrtexact — Creates an exact but empty copy of a relation including indices

dbplus_rcrtlike — Creates an empty copy of a relation with default indices

dbplus_resolve — Resolve host information for relation

dbplus_restorepos — Restore position

dbplus_rkeys — Specify new primary key for a relation

dbplus_ropen — Open relation file local

dbplus_rquery — Perform local (raw) AQL query

dbplus_rrename — Rename a relation

dbplus_rsecindex — Create a new secondary index for a relation

dbplus_runlink — Remove relation from filesystem

dbplus_rzap — Remove all tuples from relation

dbplus_savepos — Save position

dbplus_setindex — Set index

dbplus_setindexbynumber — Set index by number

dbplus_sql — Perform SQL query

dbplus_tcl — Execute TCL code on server side

dbplus_tremove — Remove tuple and return new current tuple

dbplus_undo — Undo

dbplus_undoprepare — Prepare undo

dbplus_unlockrel — Give up write lock on relation

dbplus_unselect — Remove a constraint from relation

dbplus_update — Update specified tuple in relation

dbplus_xlockrel — Request exclusive lock on relation

dbplus_xunlockrel — Free exclusive lock on relation

XXV. dba

dba_close — Close a DBA database

dba_delete — Delete DBA entry specified by key

dba_exists — Check whether key exists

dba_fetch — Fetch data specified by key

dba_firstkey — Fetch first key

dba_handlers — List all the handlers available

dba_insert — Insert entry

dba_key_split — Splits a key in string representation into array representation

dba_list — List all open database files

dba_nextkey — Fetch next key

dba_open — Open database

dba_optimize — Optimize database

dba_popen — Open database persistently

dba_replace — Replace or insert entry

dba_sync — Synchronize database

XXVI. dBase

dbase_add_record — Adds a record to a database

dbase_close — Closes a database

dbase_create — Creates a database

dbase_delete_record — Deletes a record from a database

dbase_get_header_info — Gets the header info of a database

dbase_get_record_with_names — Gets a record from a database as an associative array

dbase_get_record — Gets a record from a database as an indexed array

dbase_numfields — Gets the number of fields of a database

dbase_numrecords — Gets the number of records in a database

dbase_open — Opens a database

dbase_pack — Packs a database

dbase_replace_record — Replaces a record in a database

XXVII. DBM

dblist — Describes the DBM-compatible library being used

dbmclose — Closes a dbm database

dbmdelete — Deletes the value for a key from a DBM database

dbmexists — Tells if a value exists for a key in a DBM database

dbmfetch — Fetches a value for a key from a DBM database

dbmfirstkey — Retrieves the first key from a DBM database

dbminsert — Inserts a value for a key in a DBM database

dbmnextkey

dbmopen — Opens a DBM database

dbmreplace — Replaces the value for a key in a DBM database

XXVIII. dbx

dbx_close — Close an open connection/database

dbx_compare — Compare two rows for sorting purposes

dbx_connect — Open a connection/database

dbx_error — Report the error message of the latest function call in the module

dbx_escape_string — Escape a string so it can safely be used in an sql-statement

dbx_fetch_row — Fetches rows from a query-result that had the DBX_RESULT_UNBUFFERED flag set

dbx_query — Send a query and fetch all results (if any)

dbx_sort — Sort a result from a dbx_query by a custom sort function

XXIX. Direct IO

dio_close — Closes the file descriptor given by fd

dio_fcntl — Performs a c library fcntl on fd

dio_open — Opens a new filename with specified permissions of flags and creation permissions of mode

dio_read — Reads bytes from a file descriptor

dio_seek — Seeks to pos on fd from whence

dio_stat — Gets stat information about the file descriptor fd

dio_tcsetattr — Sets terminal attributes and baud rate for a serial port

dio_truncate — Truncates file descriptor fd to offset bytes

dio_write — Writes data to fd with optional truncation at length

XXX. Directories

chdir — Change directory

chroot — Change the root directory

dir — Return an instance of the Directory class

closedir — Close directory handle

getcwd — Gets the current working directory

opendir — Open directory handle

readdir — Read entry from directory handle

rewinddir — Rewind directory handle

scandir — List files and directories inside the specified path

XXXI. DOM

DOMAttr->__construct() — Creates a new DOMAttr object

DOMAttr->isId() — Checks if attribute is a defined ID

DOMCharacterData->appendData() — Append the string to the end of the character data of the node

DOMCharacterData->deleteData() — Remove a range of characters from the node

DOMCharacterData->insertData() — Insert a string at the specified 16-bit unit offset

DOMCharacterData->replaceData() — Replace a substring within the DOMCharacterData node

DOMCharacterData->substringData() — Extracts a range of data from the node

DOMComment->__construct() — Creates a new DOMComment object

DOMDocument->__construct() — Creates a new DOMDocument object

DOMDocument->createAttribute() — Create new attribute

DOMDocument->createAttributeNS() — Create new attribute node with an associated namespace

DOMDocument->createCDATASection() — Create new cdata node

DOMDocument->createComment() — Create new comment node

DOMDocument->createDocumentFragment() — Create new document fragment

DOMDocument->createElement() — Create new element node

DOMDocument->createElementNS() — Create new element node with an associated namespace

DOMDocument->createEntityReference() — Create new entity reference node

DOMDocument->createProcessingInstruction() — Creates new PI node

DOMDocument->createTextNode() — Create new text node

DOMDocument->getElementById() — Searches for an element with a certain id

DOMDocument->getElementsByTagName() — Searches for all elements with given tag name

DOMDocument->getElementsByTagNameNS() — Searches for all elements with given tag name in specified namespace

DOMDocument->importNode() — Import node into current document

DOMDocument->load() — Load XML from a file

DOMDocument->loadHTML() — Load HTML from a string

DOMDocument->loadHTMLFile() — Load HTML from a file

DOMDocument->loadXML() — Load XML from a string

DOMDocument->normalizeDocument() — Normalizes the document

DOMDocument->registerNodeClass() — Register extended class used to create base node type

DOMDocument->relaxNGValidate() — Performs relaxNG validation on the document

DOMDocument->relaxNGValidateSource() — Performs relaxNG validation on the document

DOMDocument->save() — Dumps the internal XML tree back into a file

DOMDocument->saveHTML() — Dumps the internal document into a string using HTML formatting

DOMDocument->saveHTMLFile() — Dumps the internal document into a file using HTML formatting

DOMDocument->saveXML() — Dumps the internal XML tree back into a string

DOMDocument->schemaValidate() — Validates a document based on a schema

DOMDocument->schemaValidateSource() — Validates a document based on a schema

DOMDocument->validate() — Validates the document based on its DTD

DOMDocument->xinclude() — Substitutes XIncludes in a DOMDocument Object

DOMDocumentFragment->appendXML() — Append raw XML data

DOMElement->__construct() — Creates a new DOMElement object

DOMElement->getAttribute() — Returns value of attribute

DOMElement->getAttributeNode() — Returns attribute node

DOMElement->getAttributeNodeNS() — Returns attribute node

DOMElement->getAttributeNS() — Returns value of attribute

DOMElement->getElementsByTagName() — Gets elements by tagname

DOMElement->getElementsByTagNameNS() — Get elements by namespaceURI and localName

DOMElement->hasAttribute() — Checks to see if attribute exists

DOMElement->hasAttributeNS() — Checks to see if attribute exists

DOMElement->removeAttribute() — Removes attribute

DOMElement->removeAttributeNode() — Removes attribute

DOMElement->removeAttributeNS() — Removes attribute

DOMElement->setAttribute() — Adds new attribute

DOMElement->setAttributeNode() — Adds new attribute node to element

DOMElement->setAttributeNodeNS() — Adds new attribute node to element

DOMElement->setAttributeNS() — Adds new attribute

DOMElement->setIdAttribute() — Declares the attribute specified by name to be of type ID

DOMElement->setIdAttributeNode() — Declares the attribute specified by node to be of type ID

DOMElement->setIdAttributeNS() — Declares the attribute specified by local name and namespace URI to be of type ID

DOMEntityReference->__construct() — Creates a new DOMEntityReference object

DOMImplementation->__construct() — Creates a new DOMImplementation object

DOMImplementation->createDocument() — Creates a DOMDocument object of the specified type with its document element

DOMImplementation->createDocumentType() — Creates an empty DOMDocumentType object

DOMImplementation->hasFeature() — Test if the DOM implementation implements a specific feature

DOMNamedNodeMap->getNamedItem() — Retrieves a node specified by name

DOMNamedNodeMap->getNamedItemNS() — Retrieves a node specified by local name and namespace URI

DOMNamedNodeMap->item() — Retrieves a node specified by index

DOMNode->appendChild() — Adds new child at the end of the children

DOMNode->cloneNode() — Clones a node

DOMNode->hasAttributes() — Checks if node has attributes

DOMNode->hasChildNodes() — Checks if node has children

DOMNode->insertBefore() — Adds a new child before a reference node

DOMNode->isDefaultNamespace() — Checks if the specified namespaceURI is the default namespace or not

DOMNode->isSameNode() — Indicates if two nodes are the same node

DOMNode->isSupported() — Checks if feature is supported for specified version

DOMNode->lookupNamespaceURI() — Gets the namespace URI of the node based on the prefix

DOMNode->lookupPrefix() — Gets the namespace prefix of the node based on the namespace URI

DOMNode->normalize() — Normalizes the node

DOMNode->removeChild() — Removes child from list of children

DOMNode->replaceChild() — Replaces a child

DOMNodelist->item() — Retrieves a node specified by index

DOMProcessingInstruction->__construct() — Creates a new DOMProcessingInstruction object

DOMText->__construct() — Creates a new DOMText object

DOMText->isWhitespaceInElementContent() — Indicates whether this text node contains whitespace

DOMText->splitText() — Breaks this node into two nodes at the specified offset

DOMXPath->__construct() — Creates a new DOMXPath object

DOMXPath->evaluate() — Evaluates the given XPath expression and returns a typed result if possible.

DOMXPath->query() — Evaluates the given XPath expression

DOMXPath->registerNamespace() — Registers the namespace with the DOMXPath object

dom_import_simplexml — Gets a DOMElement object from a SimpleXMLElement object

XXXII. DOM XML

DomAttribute->name — Returns the name of attribute

DomAttribute->set_value — Sets the value of an attribute

DomAttribute->specified — Checks if attribute is specified

DomAttribute->value — Returns value of attribute

DomDocument->add_root — Adds a root node [deprecated]

DomDocument->create_attribute — Create new attribute

DomDocument->create_cdata_section — Create new cdata node

DomDocument->create_comment — Create new comment node

DomDocument->create_element_ns — Create new element node with an associated namespace

DomDocument->create_element — Create new element node

DomDocument->create_entity_reference — Create an entity reference

DomDocument->create_processing_instruction — Creates new PI node

DomDocument->create_text_node — Create new text node

DomDocument->doctype — Returns the document type

DomDocument->document_element — Returns root element node

DomDocument->dump_file — Dumps the internal XML tree back into a file

DomDocument->dump_mem — Dumps the internal XML tree back into a string

DomDocument->get_element_by_id — Searches for an element with a certain id

DomDocument->get_elements_by_tagname — Returns array with nodes with given tagname in document or empty array, if not found

DomDocument->html_dump_mem — Dumps the internal XML tree back into a string as HTML

DomDocument->xinclude — Substitutes XIncludes in a DomDocument Object

DomDocumentType->entities() — Returns list of entities

DomDocumentType->internal_subset() — Returns internal subset

DomDocumentType->name() — Returns name of document type

DomDocumentType->notations() — Returns list of notations

DomDocumentType->public_id() — Returns public id of document type

DomDocumentType->system_id() — Returns the system id of document type

DomElement->get_attribute_node() — Returns the node of the given attribute

DomElement->get_attribute() — Returns the value of the given attribute

DomElement->get_elements_by_tagname() — Gets elements by tagname

DomElement->has_attribute() — Checks to see if an attribute exists in the current node

DomElement->remove_attribute() — Removes attribute

DomElement->set_attribute_node() — Adds new attribute

DomElement->set_attribute() — Sets the value of an attribute

DomElement->tagname() — Returns the name of the current element

DomNode->add_namespace — Adds a namespace declaration to a node

DomNode->append_child — Adds a new child at the end of the children

DomNode->append_sibling — Adds new sibling to a node

DomNode->attributes — Returns list of attributes

DomNode->child_nodes — Returns children of node

DomNode->clone_node — Clones a node

DomNode->dump_node — Dumps a single node

DomNode->first_child — Returns first child of node

DomNode->get_content — Gets content of node

DomNode->has_attributes — Checks if node has attributes

DomNode->has_child_nodes — Checks if node has children

DomNode->insert_before — Inserts new node as child

DomNode->is_blank_node — Checks if node is blank

DomNode->last_child — Returns last child of node

DomNode->next_sibling — Returns the next sibling of node

DomNode->node_name — Returns name of node

DomNode->node_type — Returns type of node

DomNode->node_value — Returns value of a node

DomNode->owner_document — Returns the document this node belongs to

DomNode->parent_node — Returns the parent of the node

DomNode->prefix — Returns name space prefix of node

DomNode->previous_sibling — Returns the previous sibling of node

DomNode->remove_child — Removes child from list of children

DomNode->replace_child — Replaces a child

DomNode->replace_node — Replaces node

DomNode->set_content — Sets content of node

DomNode->set_name — Sets name of node

DomNode->set_namespace — Sets namespace of a node

DomNode->unlink_node — Deletes node

DomProcessingInstruction->data — Returns the data of ProcessingInstruction node

DomProcessingInstruction->target — Returns the target of a ProcessingInstruction node

DomXsltStylesheet->process() — Applies the XSLT-Transformation on a DomDocument Object

DomXsltStylesheet->result_dump_file() — Dumps the result from a XSLT-Transformation into a file

DomXsltStylesheet->result_dump_mem() — Dumps the result from a XSLT-Transformation back into a string

domxml_new_doc — Creates new empty XML document

domxml_open_file — Creates a DOM object from an XML file

domxml_open_mem — Creates a DOM object of an XML document

domxml_version — Gets the XML library version

domxml_xmltree — Creates a tree of PHP objects from an XML document

domxml_xslt_stylesheet_doc — Creates a DomXsltStylesheet Object from a DomDocument Object

domxml_xslt_stylesheet_file — Creates a DomXsltStylesheet Object from an XSL document in a file

domxml_xslt_stylesheet — Creates a DomXsltStylesheet object from an XSL document in a string

domxml_xslt_version — Gets the XSLT library version

xpath_eval_expression — Evaluates the XPath Location Path in the given string

xpath_eval — Evaluates the XPath Location Path in the given string

xpath_new_context — Creates new xpath context

xpath_register_ns_auto — Register the given namespace in the passed XPath context

xpath_register_ns — Register the given namespace in the passed XPath context

xptr_eval — Evaluate the XPtr Location Path in the given string

xptr_new_context — Create new XPath Context

XXXIII. enchant

enchant_broker_describe — Enumerates the Enchant providers

enchant_broker_dict_exists — Whether a dictionary exists or not. Using non-empty tag

enchant_broker_free_dict — Free a dictionary resource

enchant_broker_free — Free the broker resource and its dictionnaries

enchant_broker_get_error — Returns the last error of the broker

enchant_broker_init — create a new broker object capable of requesting

enchant_broker_list_dicts — Returns a list of available dictionaries

enchant_broker_request_dict — create a new dictionary using a tag

enchant_broker_request_pwl_dict — creates a dictionary using a PWL file. A PWL file is personal word file one word per line.

enchant_broker_set_ordering — Declares a preference of dictionaries to use for the language

enchant_dict_add_to_personal — add a word to personal word list

enchant_dict_add_to_session — add 'word' to this spell-checking session

enchant_dict_check — Check whether a word is correctly spelled or not.

enchant_dict_describe — Describes an individual dictionary

enchant_dict_get_error — Returns the last error of the current spelling-session

enchant_dict_is_in_session — whether or not 'word' exists in this spelling-session

enchant_dict_quick_check — Check the word is correctly spelled and provide suggestions

enchant_dict_store_replacement — add a correction for a word.

enchant_dict_suggest — Will return a list of values if any of those pre-conditions are not met.

XXXIV. Errors and Logging

debug_backtrace — Generates a backtrace

debug_print_backtrace — Prints a backtrace

error_get_last — Get the last occurred error

error_log — Send an error message somewhere

error_reporting — Sets which PHP errors are reported

restore_error_handler — Restores the previous error handler function

restore_exception_handler — Restores the previously defined exception handler function

set_error_handler — Sets a user-defined error handler function

set_exception_handler — Sets a user-defined exception handler function

trigger_error — Generates a user-level error/warning/notice message

user_error — Alias of trigger_error()

XXXV. Exif

exif_imagetype — Determine the type of an image

exif_read_data — Reads the EXIF headers from JPEG or TIFF

exif_tagname — Get the header name for an index

exif_thumbnail — Retrieve the embedded thumbnail of a TIFF or JPEG image

read_exif_data — Alias of exif_read_data()

XXXVI. Expect

expect_expectl — Waits until the output from a process matches one of the patterns, a specified time period has passed, or an EOF is seen

expect_popen — Execute command via Bourne shell, and open the PTY stream to the process

XXXVII. fam

fam_cancel_monitor — Terminate monitoring

fam_close — Close FAM connection

fam_monitor_collection — Monitor a collection of files in a directory for changes

fam_monitor_directory — Monitor a directory for changes

fam_monitor_file — Monitor a regular file for changes

fam_next_event — Get next pending FAM event

fam_open — Open connection to FAM daemon

fam_pending — Check for pending FAM events

fam_resume_monitor — Resume suspended monitoring

fam_suspend_monitor — Temporarily suspend monitoring

XXXVIII. FDF

fdf_add_doc_javascript — Adds javascript code to the FDF document

fdf_add_template — Adds a template into the FDF document

fdf_close — Close an FDF document

fdf_create — Create a new FDF document

fdf_enum_values — Call a user defined function for each document value

fdf_errno — Return error code for last fdf operation

fdf_error — Return error description for FDF error code

fdf_get_ap — Get the appearance of a field

fdf_get_attachment — Extracts uploaded file embedded in the FDF

fdf_get_encoding — Get the value of the /Encoding key

fdf_get_file — Get the value of the /F key

fdf_get_flags — Gets the flags of a field

fdf_get_opt — Gets a value from the opt array of a field

fdf_get_status — Get the value of the /STATUS key

fdf_get_value — Get the value of a field

fdf_get_version — Gets version number for FDF API or file

fdf_header — Sets FDF-specific output headers

fdf_next_field_name — Get the next field name

fdf_open_string — Read a FDF document from a string

fdf_open — Open a FDF document

fdf_remove_item — Sets target frame for form

fdf_save_string — Returns the FDF document as a string

fdf_save — Save a FDF document

fdf_set_ap — Set the appearance of a field

fdf_set_encoding — Sets FDF character encoding

fdf_set_file — Set PDF document to display FDF data in

fdf_set_flags — Sets a flag of a field

fdf_set_javascript_action — Sets an javascript action of a field

fdf_set_on_import_javascript — Adds javascript code to be executed when Acrobat opens the FDF

fdf_set_opt — Sets an option of a field

fdf_set_status — Set the value of the /STATUS key

fdf_set_submit_form_action — Sets a submit form action of a field

fdf_set_target_frame — Set target frame for form display

fdf_set_value — Set the value of a field

fdf_set_version — Sets version number for a FDF file

XXXIX. Fileinfo

finfo_buffer — Return information about a string buffer

finfo_close — Close fileinfo resource

finfo_file — Return information about a file

finfo_open — Create a new fileinfo resource

finfo_set_flags — Set libmagic configuration options

XL. filePro

filepro_fieldcount — Find out how many fields are in a filePro database

filepro_fieldname — Gets the name of a field

filepro_fieldtype — Gets the type of a field

filepro_fieldwidth — Gets the width of a field

filepro_retrieve — Retrieves data from a filePro database

filepro_rowcount — Find out how many rows are in a filePro database

filepro — Read and verify the map file

XLI. Filesystem

basename — Returns filename component of path

chgrp — Changes file group

chmod — Changes file mode

chown — Changes file owner

clearstatcache — Clears file status cache

copy — Copies file

delete — See unlink() or unset()

dirname — Returns directory name component of path

disk_free_space — Returns available space in directory

disk_total_space — Returns the total size of a directory

diskfreespace — Alias of disk_free_space()

fclose — Closes an open file pointer

feof — Tests for end-of-file on a file pointer

fflush — Flushes the output to a file

fgetc — Gets character from file pointer

fgetcsv — Gets line from file pointer and parse for CSV fields

fgets — Gets line from file pointer

fgetss — Gets line from file pointer and strip HTML tags

file_exists — Checks whether a file or directory exists

file_get_contents — Reads entire file into a string

file_put_contents — Write a string to a file

file — Reads entire file into an array

fileatime — Gets last access time of file

filectime — Gets inode change time of file

filegroup — Gets file group

fileinode — Gets file inode

filemtime — Gets file modification time

fileowner — Gets file owner

fileperms — Gets file permissions

filesize — Gets file size

filetype — Gets file type

flock — Portable advisory file locking

fnmatch — Match filename against a pattern

fopen — Opens file or URL

fpassthru — Output all remaining data on a file pointer

fputcsv — Format line as CSV and write to file pointer

fputs — Alias of fwrite()

fread — Binary-safe file read

fscanf — Parses input from a file according to a format

fseek — Seeks on a file pointer

fstat — Gets information about a file using an open file pointer

ftell — Tells file pointer read/write position

ftruncate — Truncates a file to a given length

fwrite — Binary-safe file write

glob — Find pathnames matching a pattern

is_dir — Tells whether the filename is a directory

is_executable — Tells whether the filename is executable

is_file — Tells whether the filename is a regular file

is_link — Tells whether the filename is a symbolic link

is_readable — Tells whether the filename is readable

is_uploaded_file — Tells whether the file was uploaded via HTTP POST

is_writable — Tells whether the filename is writable

is_writeable — Alias of is_writable()

lchgrp — Changes group ownership of symlink

lchown — Changes user ownership of symlink

link — Create a hard link

linkinfo — Gets information about a link

lstat — Gives information about a file or symbolic link

mkdir — Makes directory

move_uploaded_file — Moves an uploaded file to a new location

parse_ini_file — Parse a configuration file

pathinfo — Returns information about a file path

pclose — Closes process file pointer

popen — Opens process file pointer

readfile — Outputs a file

readlink — Returns the target of a symbolic link

realpath — Returns canonicalized absolute pathname

rename — Renames a file or directory

rewind — Rewind the position of a file pointer

rmdir — Removes directory

set_file_buffer — Alias of stream_set_write_buffer()

stat — Gives information about a file

symlink — Creates a symbolic link

tempnam — Create file with unique file name

tmpfile — Creates a temporary file

touch — Sets access and modification time of file

umask — Changes the current umask

unlink — Deletes a file

XLII. Filter

filter_has_var — Checks if variable of specified type exists

filter_id — Returns the filter ID belonging to a named filter

filter_input_array — Gets multiple variables from outside PHP and optionally filters them

filter_input — Gets variable from outside PHP and optionally filters it

filter_list — Returns a list of all supported filters

filter_var_array — Gets multiple variables and optionally filters them

filter_var — Filters a variable with a specified filter

XLIII. Firebird/InterBase

ibase_add_user — Add a user to a security database (only for IB6 or later)

ibase_affected_rows — Return the number of rows that were affected by the previous query

ibase_backup — Initiates a backup task in the service manager and returns immediately

ibase_blob_add — Add data into a newly created blob

ibase_blob_cancel — Cancel creating blob

ibase_blob_close — Close blob

ibase_blob_create — Create a new blob for adding data

ibase_blob_echo — Output blob contents to browser

ibase_blob_get — Get len bytes data from open blob

ibase_blob_import — Create blob, copy file in it, and close it

ibase_blob_info — Return blob length and other useful info

ibase_blob_open — Open blob for retrieving data parts

ibase_close — Close a connection to an InterBase database

ibase_commit_ret — Commit a transaction without closing it

ibase_commit — Commit a transaction

ibase_connect — Open a connection to an InterBase database

ibase_db_info — Request statistics about a database

ibase_delete_user — Delete a user from a security database (only for IB6 or later)

ibase_drop_db — Drops a database

ibase_errcode — Return an error code

ibase_errmsg — Return error messages

ibase_execute — Execute a previously prepared query

ibase_fetch_assoc — Fetch a result row from a query as an associative array

ibase_fetch_object — Get an object from a InterBase database

ibase_fetch_row — Fetch a row from an InterBase database

ibase_field_info — Get information about a field

ibase_free_event_handler — Cancels a registered event handler

ibase_free_query — Free memory allocated by a prepared query

ibase_free_result — Free a result set

ibase_gen_id — Increments the named generator and returns its new value

ibase_maintain_db — Execute a maintenance command on the database server

ibase_modify_user — Modify a user to a security database (only for IB6 or later)

ibase_name_result — Assigns a name to a result set

ibase_num_fields — Get the number of fields in a result set

ibase_num_params — Return the number of parameters in a prepared query

ibase_param_info — Return information about a parameter in a prepared query

ibase_pconnect — Open a persistent connection to an InterBase database

ibase_prepare — Prepare a query for later binding of parameter placeholders and execution

ibase_query — Execute a query on an InterBase database

ibase_restore — Initiates a restore task in the service manager and returns immediately

ibase_rollback_ret — Roll back a transaction without closing it

ibase_rollback — Roll back a transaction

ibase_server_info — Request information about a database server

ibase_service_attach — Connect to the service manager

ibase_service_detach — Disconnect from the service manager

ibase_set_event_handler — Register a callback function to be called when events are posted

ibase_timefmt — Sets the format of timestamp, date and time type columns returned from queries

ibase_trans — Begin a transaction

ibase_wait_event — Wait for an event to be posted by the database

XLIV. Firebird/Interbase (PDO)

PDO_FIREBIRD DSN — Connecting to Firebird and Interbase databases

XLV. FriBiDi

fribidi_log2vis — Convert a logical string to a visual one

XLVI. FrontBase

fbsql_affected_rows — Get number of affected rows in previous FrontBase operation

fbsql_autocommit — Enable or disable autocommit

fbsql_blob_size — Get the size of a BLOB

fbsql_change_user — Change logged in user of the active connection

fbsql_clob_size — Get the size of a CLOB

fbsql_close — Close FrontBase connection

fbsql_commit — Commits a transaction to the database

fbsql_connect — Open a connection to a FrontBase Server

fbsql_create_blob — Create a BLOB

fbsql_create_clob — Create a CLOB

fbsql_create_db — Create a FrontBase database

fbsql_data_seek — Move internal result pointer

fbsql_database_password — Sets or retrieves the password for a FrontBase database

fbsql_database — Get or set the database name used with a connection

fbsql_db_query — Send a FrontBase query

fbsql_db_status — Get the status for a given database

fbsql_drop_db — Drop (delete) a FrontBase database

fbsql_errno — Returns the error number from previous operation

fbsql_error — Returns the error message from previous operation

fbsql_fetch_array — Fetch a result row as an associative array, a numeric array, or both

fbsql_fetch_assoc — Fetch a result row as an associative array

fbsql_fetch_field — Get column information from a result and return as an object

fbsql_fetch_lengths — Get the length of each output in a result

fbsql_fetch_object — Fetch a result row as an object

fbsql_fetch_row — Get a result row as an enumerated array

fbsql_field_flags — Get the flags associated with the specified field in a result

fbsql_field_len — Returns the length of the specified field

fbsql_field_name — Get the name of the specified field in a result

fbsql_field_seek — Set result pointer to a specified field offset

fbsql_field_table — Get name of the table the specified field is in

fbsql_field_type — Get the type of the specified field in a result

fbsql_free_result — Free result memory

fbsql_get_autostart_info

fbsql_hostname — Get or set the host name used with a connection

fbsql_insert_id — Get the id generated from the previous INSERT operation

fbsql_list_dbs — List databases available on a FrontBase server

fbsql_list_fields — List FrontBase result fields

fbsql_list_tables — List tables in a FrontBase database

fbsql_next_result — Move the internal result pointer to the next result

fbsql_num_fields — Get number of fields in result

fbsql_num_rows — Get number of rows in result

fbsql_password — Get or set the user password used with a connection

fbsql_pconnect — Open a persistent connection to a FrontBase Server

fbsql_query — Send a FrontBase query

fbsql_read_blob — Read a BLOB from the database

fbsql_read_clob — Read a CLOB from the database

fbsql_result — Get result data

fbsql_rollback — Rollback a transaction to the database

fbsql_rows_fetched — Get the number of rows affected by the last statement

fbsql_select_db — Select a FrontBase database

fbsql_set_characterset — Change input/output character set

fbsql_set_lob_mode — Set the LOB retrieve mode for a FrontBase result set

fbsql_set_password — Change the password for a given user

fbsql_set_transaction — Set the transaction locking and isolation

fbsql_start_db — Start a database on local or remote server

fbsql_stop_db — Stop a database on local or remote server

fbsql_table_name — Get table name of field

fbsql_tablename — Alias of of fbsql_table_name()

fbsql_username — Get or set the username for the connection

fbsql_warnings — Enable or disable FrontBase warnings

XLVII. FTP

ftp_alloc — Allocates space for a file to be uploaded

ftp_cdup — Changes to the parent directory

ftp_chdir — Changes the current directory on a FTP server

ftp_chmod — Set permissions on a file via FTP

ftp_close — Closes an FTP connection

ftp_connect — Opens an FTP connection

ftp_delete — Deletes a file on the FTP server

ftp_exec — Requests execution of a command on the FTP server

ftp_fget — Downloads a file from the FTP server and saves to an open file

ftp_fput — Uploads from an open file to the FTP server

ftp_get_option — Retrieves various runtime behaviours of the current FTP stream

ftp_get — Downloads a file from the FTP server

ftp_login — Logs in to an FTP connection

ftp_mdtm — Returns the last modified time of the given file

ftp_mkdir — Creates a directory

ftp_nb_continue — Continues retrieving/sending a file (non-blocking)

ftp_nb_fget — Retrieves a file from the FTP server and writes it to an open file (non-blocking)

ftp_nb_fput — Stores a file from an open file to the FTP server (non-blocking)

ftp_nb_get — Retrieves a file from the FTP server and writes it to a local file (non-blocking)

ftp_nb_put — Stores a file on the FTP server (non-blocking)

ftp_nlist — Returns a list of files in the given directory

ftp_pasv — Turns passive mode on or off

ftp_put — Uploads a file to the FTP server

ftp_pwd — Returns the current directory name

ftp_quit — Alias of ftp_close()

ftp_raw — Sends an arbitrary command to an FTP server

ftp_rawlist — Returns a detailed list of files in the given directory

ftp_rename — Renames a file or a directory on the FTP server

ftp_rmdir — Removes a directory

ftp_set_option — Set miscellaneous runtime FTP options

ftp_site — Sends a SITE command to the server

ftp_size — Returns the size of the given file

ftp_ssl_connect — Opens an Secure SSL-FTP connection

ftp_systype — Returns the system type identifier of the remote FTP server

XLVIII. Function handling

call_user_func_array — Call a user function given with an array of parameters

call_user_func — Call a user function given by the first parameter

create_function — Create an anonymous (lambda-style) function

func_get_arg — Return an item from the argument list

func_get_args — Returns an array comprising a function's argument list

func_num_args — Returns the number of arguments passed to the function

function_exists — Return TRUE if the given function has been defined

get_defined_functions — Returns an array of all defined functions

register_shutdown_function — Register a function for execution on shutdown

register_tick_function — Register a function for execution on each tick

unregister_tick_function — De-register a function for execution on each tick

XLIX. GeoIP

geoip_country_code_by_name — Get the two letter country code

geoip_country_code3_by_name — Get the three letter country code

geoip_country_name_by_name — Get the full country name

geoip_database_info — Get GeoIP Database information

geoip_db_avail — Determine if GeoIP Database is available

geoip_db_filename — Returns the filename of the corresponding GeoIP Database

geoip_db_get_all_info — Returns detailed informations about all GeoIP database types

geoip_id_by_name — Get the Internet connection speed

geoip_org_by_name — Get the organization name

geoip_record_by_name — Returns the detailed City information found in the GeoIP Database

geoip_region_by_name — Get the country code and region

L. gettext

bind_textdomain_codeset — Specify the character encoding in which the messages from the DOMAIN message catalog will be returned

bindtextdomain — Sets the path for a domain

dcgettext — Overrides the domain for a single lookup

dcngettext — Plural version of dcgettext

dgettext — Override the current domain

dngettext — Plural version of dgettext

gettext — Lookup a message in the current domain

ngettext — Plural version of gettext

textdomain — Sets the default domain

LI. GMP

gmp_abs — Absolute value

gmp_add — Add numbers

gmp_and — Logical AND

gmp_clrbit — Clear bit

gmp_cmp — Compare numbers

gmp_com — Calculates one's complement

gmp_div_q — Divide numbers

gmp_div_qr — Divide numbers and get quotient and remainder

gmp_div_r — Remainder of the division of numbers

gmp_div — Alias of gmp_div_q()

gmp_divexact — Exact division of numbers

gmp_fact — Factorial

gmp_gcd — Calculate GCD

gmp_gcdext — Calculate GCD and multipliers

gmp_hamdist — Hamming distance

gmp_init — Create GMP number

gmp_intval — Convert GMP number to integer

gmp_invert — Inverse by modulo

gmp_jacobi — Jacobi symbol

gmp_legendre — Legendre symbol

gmp_mod — Modulo operation

gmp_mul — Multiply numbers

gmp_neg — Negate number

gmp_nextprime — Find next prime number

gmp_or — Logical OR

gmp_perfect_square — Perfect square check

gmp_popcount — Population count

gmp_pow — Raise number into power

gmp_powm — Raise number into power with modulo

gmp_prob_prime — Check if number is "probably prime"

gmp_random — Random number

gmp_scan0 — Scan for 0

gmp_scan1 — Scan for 1

gmp_setbit — Set bit

gmp_sign — Sign of number

gmp_sqrt — Calculate square root

gmp_sqrtrem — Square root with remainder

gmp_strval — Convert GMP number to string

gmp_sub — Subtract numbers

gmp_testbit — Tests if a bit is set

gmp_xor — Logical XOR

LII. gnupg

gnupg_adddecryptkey — Add a key for decryption

gnupg_addencryptkey — Add a key for encryption

gnupg_addsignkey — Add a key for signing

gnupg_cleardecryptkeys — Removes all keys which were set for decryption before

gnupg_clearencryptkeys — Removes all keys which were set for encryption before

gnupg_clearsignkeys — Removes all keys which were set for signing before

gnupg_decrypt — Decrypts a given text

gnupg_decryptverify — Decrypts and verifies a given text

gnupg_encrypt — Encrypts a given text

gnupg_encryptsign — Encrypts and signs a given text

gnupg_export — Exports a key

gnupg_geterror — Returns the errortext, if a function fails

gnupg_getprotocol — Returns the currently active protocol for all operations

gnupg_import — Imports a key

gnupg_keyinfo — Returns an array with information about all keys that matches the given pattern

gnupg_setarmor — Toggle armored output

gnupg_seterrormode — Sets the mode for error_reporting

gnupg_setsignmode — Sets the mode for signing

gnupg_sign — Signs a given text

gnupg_verify — Verifies a signed text

LIII. gopher

gopher_parsedir — Translate a gopher formatted directory entry into an associative array.

LIV. haru

HaruException — Haru PDF Exception Class

HaruDoc — Haru PDF Document Class

HaruPage — Haru PDF Page Class

HaruFont — Haru PDF Font Class

HaruImage — Haru PDF Image Class

HaruEncoder — Haru PDF Encoder Class

HaruOutline — Haru PDF Outline Class

HaruAnnotation — Haru PDF Annotation Class

HaruDestination — Haru PDF Destination Class

HaruAnnotation::setBorderStyle — Set the border style of the annotation

HaruAnnotation::setHighlightMode — Set the highlighting mode of the annotation

HaruAnnotation::setIcon — Set the icon style of the annotation

HaruAnnotation::setOpened — Set the initial state of the annotation

HaruDestination::setFit — Set the appearance of the page to fit the window

HaruDestination::setFitB — Set the appearance of the page to fit the bounding box of the page within the window

HaruDestination::setFitBH — Set the appearance of the page to fit the width of the bounding box

HaruDestination::setFitBV — Set the appearance of the page to fit the height of the boudning box

HaruDestination::setFitH — Set the appearance of the page to fit the window width

HaruDestination::setFitR — Set the appearance of the page to fit the specified rectangle

HaruDestination::setFitV — Set the appearance of the page to fit the window height

HaruDestination::setXYZ — Set the appearance of the page

HaruDoc::addPage — Add new page to the document

HaruDoc::addPageLabel — Set the numbering style for the specified range of pages

HaruDoc::__construct — Construct new HaruDoc instance

HaruDoc::createOutline — Create a HaruOutline instance

HaruDoc::getCurrentEncoder — Get HaruEncoder currently used in the document

HaruDoc::getCurrentPage — Return current page of the document

HaruDoc::getEncoder — Get HaruEncoder instance for the specified encoding

HaruDoc::getFont — Get HaruFont instance

HaruDoc::getInfoAttr — Get current value of the specified document attribute

HaruDoc::getPageLayout — Get current page layout

HaruDoc::getPageMode — Get current page mode

HaruDoc::getStreamSize — Get the size of the temporary stream

HaruDoc::insertPage — Insert new page just before the specified page

HaruDoc::loadJPEG — Load JPEG image and return new HaruImage instance

HaruDoc::loadPNG — Load PNG image and return HaruImage instance

HaruDoc::loadRaw — Load RAW image and return HaruImage instance

HaruDoc::loadTTC — Load the font with the specified index from TTC file

HaruDoc::loadTTF — Load TTF font file

HaruDoc::loadType1 — Load Type1 font

HaruDoc::output — Write the document data to the output buffer

HaruDoc::readFromStream — Read data from the temporary stream

HaruDoc::resetError — Reset error state of the document handle

HaruDoc::resetStream — Rewind the temporary stream

HaruDoc::save — Save the document into the specified file

HaruDoc::saveToStream — Save the document into a temporary stream

HaruDoc::setCompressionMode — Set compression mode for the document

HaruDoc::setCurrentEncoder — Set the current encoder for the document

HaruDoc::setEncryptionMode — Set encryption mode for the document

HaruDoc::setInfoAttr — Set the info attribute of the document

HaruDoc::setInfoDateAttr — Set the datetime info attributes of the document

HaruDoc::setOpenAction — Define which page is shown when the document is opened

HaruDoc::setPageLayout — Set how pages should be displayed

HaruDoc::setPageMode — Set how the document should be displayed

HaruDoc::setPagesConfiguration — Set the number of pages per set of pages

HaruDoc::setPassword — Set owner and user passwords for the document

HaruDoc::setPermission — Set permissions for the document

HaruDoc::useCNSEncodings — Enable Chinese simplified encodings

HaruDoc::useCNSFonts — Enable builtin Chinese simplified fonts

HaruDoc::useCNTEncodings — Enable Chinese traditional encodings

HaruDoc::useCNTFonts — Enable builtin Chinese traditional fonts

HaruDoc::useJPEncodings — Enable Japanese encodings

HaruDoc::useJPFonts — Enable builtin Japanese fonts

HaruDoc::useKREncodings — Enable Korean encodings

HaruDoc::useKRFonts — Enable builtin Korean fonts

HaruEncoder::getByteType — Get the type of the byte in the text

HaruEncoder::getType — Get the type of the encoder

HaruEncoder::getUnicode — Convert the specified character to unicode

HaruEncoder::getWritingMode — Get the writing mode of the encoder

HaruFont::getAscent — Get the vertical ascent of the font

HaruFont::getCapHeight — Get the distance from the baseline of uppercase letters

HaruFont::getDescent — Get the vertical descent of the font

HaruFont::getEncodingName — Get the name of the encoding

HaruFont::getFontName — Get the name of the font

HaruFont::getTextWidth — Get the total width of the text, number of characters, number of words and number of spaces

HaruFont::getUnicodeWidth — Get the width of the character in the font

HaruFont::getXHeight — Get the distance from the baseline of lowercase letters

HaruFont::measureText — Calculate the number of characters which can be included within the specified width

HaruImage::getBitsPerComponent — Get the number of bits used to describe each color component of the image

HaruImage::getColorSpace — Get the name of the color space

HaruImage::getHeight — Get the height of the image

HaruImage::getSize — Get size of the image

HaruImage::getWidth — Get the width of the image

HaruImage::setColorMask — Set the color mask of the image

HaruImage::setMaskImage — Set the image mask

HaruOutline::setDestination — Set the destination for the outline

HaruOutline::setOpened — Set the initial state of the outline

HaruPage::arc — Append an arc to the current path

HaruPage::beginText — Begin a text object and set the current text position to (0,0)

HaruPage::circle — Append a circle to the current path

HaruPage::closePath — Append a straight line from the current point to the start point of the path

HaruPage::concat — Concatenate current transformation matrix of the page and the specified matrix

HaruPage::createDestination — Create new HaruDestination instance

HaruPage::createLinkAnnotation — Create new HaruAnnotation instance

HaruPage::createTextAnnotation — Create new HaruAnnotation instance

HaruPage::createURLAnnotation — Create and return new HaruAnnotation instance

HaruPage::curveTo2 — Append a Bezier curve to the current path

HaruPage::curveTo3 — Append a Bezier curve to the current path

HaruPage::curveTo — Append a Bezier curve to the current path

HaruPage::drawImage — Show image at the page

HaruPage::ellipse — Append an ellipse to the current path

HaruPage::endPath — End current path object without filling and painting operations

HaruPage::endText — End current text object

HaruPage::eofill — Fill current path using even-odd rule

HaruPage::eoFillStroke — Fill current path using even-odd rule, then paint the path

HaruPage::fill — Fill current path using nonzero winding number rule

HaruPage::fillStroke — Fill current path using nonzero winding number rule, then paint the path

HaruPage::getCharSpace — Get the current value of character spacing

HaruPage::getCMYKFill — Get the current filling color

HaruPage::getCMYKStroke — Get the current stroking color

HaruPage::getCurrentFont — Get the currently used font

HaruPage::getCurrentFontSize — Get the current font size

HaruPage::getCurrentPos — Get the current position for path painting

HaruPage::getCurrentTextPos — Get the current position for text printing

HaruPage::getDash — Get the current dash pattern

HaruPage::getFillingColorSpace — Get the current filling color space

HaruPage::getFlatness — Get the flatness of the page

HaruPage::getGMode — Get the current graphics mode

HaruPage::getGrayFill — Get the current filling color

HaruPage::getGrayStroke — Get the current stroking color

HaruPage::getHeight — Get the height of the page

HaruPage::getHorizontalScaling — Get the current value of horizontal scaling

HaruPage::getLineCap — Get the current line cap style

HaruPage::getLineJoin — Get the current line join style

HaruPage::getLineWidth — Get the current line width

HaruPage::getMiterLimit — Get the value of miter limit

HaruPage::getRGBFill — Get the current filling color

HaruPage::getRGBStroke — Get the current stroking color

HaruPage::getStrokingColorSpace — Get the current stroking color space

HaruPage::getTextLeading — Get the current value of line spacing

HaruPage::getTextMatrix — Get the current text transformation matrix of the page

HaruPage::getTextRenderingMode — Get the current text rendering mode

HaruPage::getTextRise — Get the current value of text rising

HaruPage::getTextWidth — Get the width of the text using current fontsize, character spacing and word spacing

HaruPage::getTransMatrix — Get the current transformation matrix of the page

HaruPage::getWidth — Get the width of the page

HaruPage::getWordSpace — Get the current value of word spacing

HaruPage::lineTo — Draw a line from the current point to the specified point

HaruPage::measureText — Calculate the number of characters which can be included within the specified width

HaruPage::moveTextPos — Move text position to the specified offset

HaruPage::moveTo — Set starting point for new drawing path

HaruPage::moveToNextLine — Move text position to the start of the next line

HaruPage::rectangle — Append a rectangle to the current path

HaruPage::setCharSpace — Set character spacing for the page

HaruPage::setCMYKFill — Set filling color for the page

HaruPage::setCMYKStroke — Set stroking color for the page

HaruPage::setDash — Set the dash pattern for the page

HaruPage::setFlatness — Set flatness for the page

HaruPage::setFontAndSize — Set font and fontsize for the page

HaruPage::setGrayFill — Set filling color for the page

HaruPage::setGrayStroke — Sets stroking color for the page

HaruPage::setHeight — Set height of the page

HaruPage::setHorizontalScaling — Set horizontal scaling for the page

HaruPage::setLineCap — Set the shape to be used at the ends of lines

HaruPage::setLineJoin — Set line join style for the page

HaruPage::setLineWidth — Set line width for the page

HaruPage::setMiterLimit — Set the current value of the miter limit of the page

HaruPage::setRGBFill — Set filling color for the page

HaruPage::setRGBStroke — Set stroking color for the page

HaruPage::setRotate — Set rotation angle of the page

HaruPage::setSize — Set size and direction of the page

HaruPage::setSlideShow — Set transition style for the page

HaruPage::setTextLeading — Set text leading (line spacing) for the page

HaruPage::setTextMatrix — Set the current text transformation matrix of the page

HaruPage::setTextRenderingMode — Set text rendering mode for the page

HaruPage::setTextRise — Set the current value of text rising

HaruPage::setWidth — Set width of the page

HaruPage::setWordSpace — Set word spacing for the page

HaruPage::showText — Print text at the current position of the page

HaruPage::showTextNextLine — Move the current position to the start of the next line and print the text

HaruPage::stroke — Paint current path

HaruPage::textOut — Print the text on the specified position

HaruPage::textRect — Print the text inside the specified region

LV. hash

hash_algos — Return a list of registered hashing algorithms

hash_file — Generate a hash value using the contents of a given file

hash_final — Finalize an incremental hash and return resulting digest

hash_hmac_file — Generate a keyed hash value using the HMAC method and the contents of a given file

hash_hmac — Generate a keyed hash value using the HMAC method

hash_init — Initialize an incremental hashing context

hash_update_file — Pump data into an active hashing context from a file

hash_update_stream — Pump data into an active hashing context from an open stream

hash_update — Pump data into an active hashing context

hash — Generate a hash value (message digest)

LVI. http

Installation — Installing the HTTP extension

Configuration — http module configuration directives

Resources — Resources created by the HTTP extension

Constants — predefined http module constants

Request Options — options usable with the HttpRequest class and request functions

HttpMessage — HTTP Message Class

HttpMessage::__construct — HttpMessage constructor

HttpMessage::factory — Create HttpMessage from string

HttpMessage::fromEnv — Create HttpMessage from environment

HttpMessage::fromString — Create HttpMessage from string

HttpMessage::toString — Get string representation

HttpMessage::toMessageTypeObject — Create HTTP object regarding message type

HttpMessage::guessContentType — Guess content type

HttpMessage::detach — Detach HttpMessage

HttpMessage::prepend — Prepend message(s)

HttpMessage::reverse — Reverse message chain

HttpMessage::send — Send message

HttpMessage::getParentMessage — Get parent message

HttpMessage::getType — Get message type

HttpMessage::setType — Set message type

HttpMessage::getHttpVersion — Get HTTP version

HttpMessage::setHttpVersion — Set HTTP version

HttpMessage::getHeaders — Get message headers

HttpMessage::getHeader — Get header

HttpMessage::addHeaders — Add headers

HttpMessage::setHeaders — Set headers

HttpMessage::getBody — Get message body

HttpMessage::setBody — Set message body

HttpMessage::getRequestMethod — Get request method

HttpMessage::setRequestMethod — Set request method

HttpMessage::getRequestUrl — Get request URL

HttpMessage::setRequestUrl — Set request URL

HttpMessage::getResponseCode — Get response code

HttpMessage::setResponseCode — Set response code

HttpMessage::getResponseStatus — Get response status

HttpMessage::setResponseStatus — Set response status

HttpQueryString — HTTP Query String Class

HttpQueryString::__construct — HttpQueryString constructor

HttpQueryString::singleton — HttpQueryString singleton

HttpQueryString::get — Get (part of) query string

HttpQueryString::mod — Modifiy query string copy

HttpQueryString::set — Set query string params

HttpQueryString::toArray — Get query string as array

HttpQueryString::toString — Get query string

HttpQueryString::xlate — Change query strings charset

HttpDeflateStream — HTTP Deflate Stream Class

HttpDeflateStream::factory — HttpDeflateStream class factory

HttpDeflateStream::__construct — HttpDeflateStream class constructor

HttpDeflateStream::update — Update deflate stream

HttpDeflateStream::flush — Flush deflate stream

HttpDeflateStream::finish — Finalize deflate stream

HttpInflateStream — HTTP Inflate Stream

HttpInflateStream::factory — HttpInflateStream class factory

HttpInflateStream::__construct — HttpInflateStream class constructor

HttpInflateStream::update — Update inflate stream

HttpInflateStream::flush — Flush inflate stream

HttpInflateStream::finish — Finalize inflate stream

HttpRequest — HTTP Request Class

HttpRequest::addCookies — Add cookies

HttpRequest::addHeaders — Add headers

HttpRequest::addPostFields — Add post fields

HttpRequest::addPostFile — Add post file

HttpRequest::addPutData — Add put data

HttpRequest::addQueryData — Add query data

HttpRequest::addRawPostData — Add raw post data

HttpRequest::addSslOptions — Add ssl options

HttpRequest::clearHistory — Clear history

HttpRequest::__construct — HttpRequest constructor

HttpRequest::enableCookies — Enable cookies

HttpRequest::getContentType — Get content type

HttpRequest::getCookies — Get cookies

HttpRequest::getHeaders — Get headers

HttpRequest::getHistory — Get history

HttpRequest::getMethod — Get method

HttpRequest::getOptions — Get options

HttpRequest::getPostFields — Get post fields

HttpRequest::getPostFiles — Get post files

HttpRequest::getPutData — Get put data

HttpRequest::getPutFile — Get put file

HttpRequest::getQueryData — Get query data

HttpRequest::getRawPostData — Get raw post data

HttpRequest::getRawRequestMessage — Get raw request message

HttpRequest::getRawResponseMessage — Get raw response message

HttpRequest::getRequestMessage — Get request message

HttpRequest::getResponseBody — Get response body

HttpRequest::getResponseCode — Get response code

HttpRequest::getResponseCookies — Get response cookie(s)

HttpRequest::getResponseData — Get response data

HttpRequest::getResponseHeader — Get response header(s)

HttpRequest::getResponseInfo — Get response info

HttpRequest::getResponseMessage — Get response message

HttpRequest::getResponseStatus — Get response status

HttpRequest::getSslOptions — Get ssl options

HttpRequest::getUrl — Get url

HttpRequest::resetCookies — Reset cookies

HttpRequest::send — Send request

HttpRequest::setContentType — Set content type

HttpRequest::setCookies — Set cookies

HttpRequest::setHeaders — Set headers

HttpRequest::setMethod — Set method

HttpRequest::setOptions — Set options

HttpRequest::setPostFields — Set post fields

HttpRequest::setPostFiles — Set post files

HttpRequest::setPutData — Set put data

HttpRequest::setPutFile — Set put file

HttpRequest::setQueryData — Set query data

HttpRequest::setRawPostData — Set raw post data

HttpRequest::setSslOptions — Set ssl options

HttpRequest::setUrl — Set URL

HttpRequestPool — HTTP Request Pool Class

HttpRequestPool::attach — Attach HttpRequest

HttpRequestPool::__construct — HttpRequestPool constructor

HttpRequestPool::__destruct — HttpRequestPool destructor

HttpRequestPool::detach — Detach HttpRequest

HttpRequestPool::getAttachedRequests — Get attached requests

HttpRequestPool::getFinishedRequests — Get finished requests

HttpRequestPool::reset — Reset request pool

HttpRequestPool::send — Send all requests

HttpRequestPool::socketPerform — Perform socket actions

HttpRequestPool::socketSelect — Perform socket select

HttpResponse — HTTP Response Class

HttpResponse::capture — Capture script output

HttpResponse::getBufferSize — Get buffer size

HttpResponse::getCacheControl — Get cache control

HttpResponse::getCache — Get cache

HttpResponse::getContentDisposition — Get content disposition

HttpResponse::getContentType — Get content type

HttpResponse::getData — Get data

HttpResponse::getETag — Get ETag

HttpResponse::getFile — Get file

HttpResponse::getGzip — Get gzip

HttpResponse::getHeader — Get header

HttpResponse::getLastModified — Get last modified

HttpResponse::getStream — Get Stream

HttpResponse::getThrottleDelay — Get throttle delay

HttpResponse::getRequestBody — Get request body

HttpResponse::getRequestBodyStream — Get request body stream

HttpResponse::getRequestHeaders — Get request headers

HttpResponse::guessContentType — Guess content type

HttpResponse::redirect — Redirect

HttpResponse::send — Send response

HttpResponse::setBufferSize — Set buffer size

HttpResponse::setCacheControl — Set cache control

HttpResponse::setCache — Set cache

HttpResponse::setContentDisposition — Set content disposition

HttpResponse::setContentType — Set content type

HttpResponse::setData — Set data

HttpResponse::setETag — Set ETag

HttpResponse::setFile — Set file

HttpResponse::setGzip — Set gzip

HttpResponse::setHeader — Set header

HttpResponse::setLastModified — Set last modified

HttpResponse::setStream — Set stream

HttpResponse::setThrottleDelay — Set throttle delay

HttpResponse::status — Send HTTP response status

http_cache_etag — Caching by ETag

http_cache_last_modified — Caching by last modification

http_chunked_decode — Decode chunked-encoded data

http_deflate — Deflate data

http_inflate — Inflate data

http_get_request_body_stream — Get request body as stream

http_get_request_body — Get request body as string

http_get_request_headers — Get request headers as array

http_date — Compose HTTP RFC compliant date

http_support — Check built-in HTTP support

http_match_etag — Match ETag

http_match_modified — Match last modification

http_match_request_header — Match any header

http_build_cookie — Build cookie string

http_negotiate_charset — Negotiate clients preferred character set

http_negotiate_content_type — Negotiate clients preferred content type

http_negotiate_language — Negotiate clients preferred language

ob_deflatehandler — Deflate output handler

ob_etaghandler — ETag output handler

ob_inflatehandler — Inflate output handler

http_parse_cookie — Parse HTTP cookie

http_parse_headers — Parse HTTP headers

http_parse_message — Parse HTTP messages

http_parse_params — Parse parameter list

http_persistent_handles_count — Stat persistent handles

http_persistent_handles_ident — Get/set ident of persistent handles

http_persistent_handles_clean — Clean up persistent handles

http_get — Perform GET request

http_head — Perform HEAD request

http_post_data — Perform POST request with pre-encoded data

http_post_fields — Perform POST request with data to be encoded

http_put_data — Perform PUT request with data

http_put_file — Perform PUT request with file

http_put_stream — Perform PUT request with stream

http_request_method_exists — Check whether request method exists

http_request_method_name — Get request method name

http_request_method_register — Register request method

http_request_method_unregister — Unregister request method

http_request — Perform custom request

http_request_body_encode — Encode request body

http_redirect — Issue HTTP redirect

http_send_content_disposition — Send Content-Disposition

http_send_content_type — Send Content-Type

http_send_data — Send arbitrary data

http_send_file — Send file

http_send_last_modified — Send Last-Modified

http_send_status — Send HTTP response status

http_send_stream — Send stream

http_throttle — HTTP throttling

http_build_str — Build query string

http_build_url — Build an URL

LVII. Hyperwave

hw_Array2Objrec — Convert attributes from object array to object record

hw_changeobject — Changes attributes of an object (obsolete)

hw_Children — Object ids of children

hw_ChildrenObj — Object records of children

hw_Close — Closes the Hyperwave connection

hw_Connect — Opens a connection

hw_connection_info — Prints information about the connection to Hyperwave server

hw_cp — Copies objects

hw_Deleteobject — Deletes object

hw_DocByAnchor — Object id object belonging to anchor

hw_DocByAnchorObj — Object record object belonging to anchor

hw_Document_Attributes — Object record of hw_document

hw_Document_BodyTag — Body tag of hw_document

hw_Document_Content — Returns content of hw_document

hw_Document_SetContent — Sets/replaces content of hw_document

hw_Document_Size — Size of hw_document

hw_dummy — Hyperwave dummy function

hw_EditText — Retrieve text document

hw_Error — Error number

hw_ErrorMsg — Returns error message

hw_Free_Document — Frees hw_document

hw_GetAnchors — Object ids of anchors of document

hw_GetAnchorsObj — Object records of anchors of document

hw_GetAndLock — Return object record and lock object

hw_GetChildColl — Object ids of child collections

hw_GetChildCollObj — Object records of child collections

hw_GetChildDocColl — Object ids of child documents of collection

hw_GetChildDocCollObj — Object records of child documents of collection

hw_GetObject — Object record

hw_GetObjectByQuery — Search object

hw_GetObjectByQueryColl — Search object in collection

hw_GetObjectByQueryCollObj — Search object in collection

hw_GetObjectByQueryObj — Search object

hw_GetParents — Object ids of parents

hw_GetParentsObj — Object records of parents

hw_getrellink — Get link from source to dest relative to rootid

hw_GetRemote — Gets a remote document

hw_getremotechildren — Gets children of remote document

hw_GetSrcByDestObj — Returns anchors pointing at object

hw_GetText — Retrieve text document

hw_getusername — Name of currently logged in user

hw_Identify — Identifies as user

hw_InCollections — Check if object ids in collections

hw_Info — Info about connection

hw_InsColl — Insert collection

hw_InsDoc — Insert document

hw_insertanchors — Inserts only anchors into text

hw_InsertDocument — Upload any document

hw_InsertObject — Inserts an object record

hw_mapid — Maps global id on virtual local id

hw_Modifyobject — Modifies object record

hw_mv — Moves objects

hw_New_Document — Create new document

hw_objrec2array — Convert attributes from object record to object array

hw_Output_Document — Prints hw_document

hw_pConnect — Make a persistent database connection

hw_PipeDocument — Retrieve any document

hw_Root — Root object id

hw_setlinkroot — Set the id to which links are calculated

hw_stat — Returns status string

hw_Unlock — Unlock object

hw_Who — List of currently logged in users

LVIII. Hyperwave API

hw_api_attribute->key — Returns key of the attribute

hw_api_attribute->langdepvalue — Returns value for a given language

hw_api_attribute->value — Returns value of the attribute

hw_api_attribute->values — Returns all values of the attribute

hw_api_attribute — Creates instance of class hw_api_attribute

hw_api->checkin — Checks in an object

hw_api->checkout — Checks out an object

hw_api->children — Returns children of an object

hw_api_content->mimetype — Returns mimetype

hw_api_content->read — Read content

hw_api->content — Returns content of an object

hw_api->copy — Copies physically

hw_api->dbstat — Returns statistics about database server

hw_api->dcstat — Returns statistics about document cache server

hw_api->dstanchors — Returns a list of all destination anchors

hw_api->dstofsrcanchor — Returns destination of a source anchor

hw_api_error->count — Returns number of reasons

hw_api_error->reason — Returns reason of error

hw_api->find — Search for objects

hw_api->ftstat — Returns statistics about fulltext server

hwapi_hgcsp — Returns object of class hw_api

hw_api->hwstat — Returns statistics about Hyperwave server

hw_api->identify — Log into Hyperwave Server

hw_api->info — Returns information about server configuration

hw_api->insert — Inserts a new object

hw_api->insertanchor — Inserts a new object of type anchor

hw_api->insertcollection — Inserts a new object of type collection

hw_api->insertdocument — Inserts a new object of type document

hw_api->link — Creates a link to an object

hw_api->lock — Locks an object

hw_api->move — Moves object between collections

hw_api_content — Create new instance of class hw_api_content

hw_api_object->assign — Clones object

hw_api_object->attreditable — Checks whether an attribute is editable

hw_api_object->count — Returns number of attributes

hw_api_object->insert — Inserts new attribute

hw_api_object — Creates a new instance of class hw_api_object

hw_api_object->remove — Removes attribute

hw_api_object->title — Returns the title attribute

hw_api_object->value — Returns value of attribute

hw_api->object — Retrieve attribute information

hw_api->objectbyanchor — Returns the object an anchor belongs to

hw_api->parents — Returns parents of an object

hw_api_reason->description — Returns description of reason

hw_api_reason->type — Returns type of reason

hw_api->remove — Delete an object

hw_api->replace — Replaces an object

hw_api->setcommittedversion — Commits version other than last version

hw_api->srcanchors — Returns a list of all source anchors

hw_api->srcsofdst — Returns source of a destination object

hw_api->unlock — Unlocks a locked object

hw_api->user — Returns the own user object

hw_api->userlist — Returns a list of all logged in users

LIX. i18n

locale_get_default — Get the default Locale

locale_set_default — Set the default Locale

LX. IBM (PDO)

PDO_IBM DSN — Connecting to IBM databases

LXI. ibm_db2

db2_autocommit — Returns or sets the AUTOCOMMIT state for a database connection

db2_bind_param — Binds a PHP variable to an SQL statement parameter

db2_client_info — Returns an object with properties that describe the DB2 database client

db2_close — Closes a database connection

db2_column_privileges — Returns a result set listing the columns and associated privileges for a table

db2_columns — Returns a result set listing the columns and associated metadata for a table

db2_commit — Commits a transaction

db2_conn_error — Returns a string containing the SQLSTATE returned by the last connection attempt

db2_conn_errormsg — Returns the last connection error message and SQLCODE value

db2_connect — Returns a connection to a database

db2_cursor_type — Returns the cursor type used by a statement resource

db2_escape_string — Used to escape certain characters.

db2_exec — Executes an SQL statement directly

db2_execute — Executes a prepared SQL statement

db2_fetch_array — Returns an array, indexed by column position, representing a row in a result set

db2_fetch_assoc — Returns an array, indexed by column name, representing a row in a result set

db2_fetch_both — Returns an array, indexed by both column name and position, representing a row in a result set

db2_fetch_object — Returns an object with properties representing columns in the fetched row

db2_fetch_row — Sets the result set pointer to the next row or requested row

db2_field_display_size — Returns the maximum number of bytes required to display a column

db2_field_name — Returns the name of the column in the result set

db2_field_num — Returns the position of the named column in a result set

db2_field_precision — Returns the precision of the indicated column in a result set

db2_field_scale — Returns the scale of the indicated column in a result set

db2_field_type — Returns the data type of the indicated column in a result set

db2_field_width — Returns the width of the current value of the indicated column in a result set

db2_foreign_keys — Returns a result set listing the foreign keys for a table

db2_free_result — Frees resources associated with a result set

db2_free_stmt — Frees resources associated with the indicated statement resource

db2_get_option — Retrieves an option value for a statement resource or a connection resource

db2_lob_read — Gets a user defined size of LOB files with each invocation

db2_next_result — Requests the next result set from a stored procedure

db2_num_fields — Returns the number of fields contained in a result set

db2_num_rows — Returns the number of rows affected by an SQL statement

db2_pconnect — Returns a persistent connection to a database

db2_prepare — Prepares an SQL statement to be executed

db2_primary_keys — Returns a result set listing primary keys for a table

db2_procedure_columns — Returns a result set listing stored procedure parameters

db2_procedures — Returns a result set listing the stored procedures registered in a database

db2_result — Returns a single column from a row in the result set

db2_rollback — Rolls back a transaction

db2_server_info — Returns an object with properties that describe the DB2 database server

db2_set_option — Set options for connection or statement resources

db2_special_columns — Returns a result set listing the unique row identifier columns for a table

db2_statistics — Returns a result set listing the index and statistics for a table

db2_stmt_error — Returns a string containing the SQLSTATE returned by an SQL statement

db2_stmt_errormsg — Returns a string containing the last SQL statement error message

db2_table_privileges — Returns a result set listing the tables and associated privileges in a database

db2_tables — Returns a result set listing the tables and associated metadata in a database

LXII. iconv

iconv_get_encoding — Retrieve internal configuration variables of iconv extension

iconv_mime_decode_headers — Decodes multiple MIME header fields at once

iconv_mime_decode — Decodes a MIME header field

iconv_mime_encode — Composes a MIME header field

iconv_set_encoding — Set current setting for character encoding conversion

iconv_strlen — Returns the character count of string

iconv_strpos — Finds position of first occurrence of a needle within a haystack

iconv_strrpos — Finds the last occurrence of a needle within a haystack

iconv_substr — Cut out part of a string

iconv — Convert string to requested character encoding

ob_iconv_handler — Convert character encoding as output buffer handler

LXIII. id3

id3_get_frame_long_name — Get the long name of an ID3v2 frame

id3_get_frame_short_name — Get the short name of an ID3v2 frame

id3_get_genre_id — Get the id for a genre

id3_get_genre_list — Get all possible genre values

id3_get_genre_name — Get the name for a genre id

id3_get_tag — Get all information stored in an ID3 tag

id3_get_version — Get version of an ID3 tag

id3_remove_tag — Remove an existing ID3 tag

id3_set_tag — Update information stored in an ID3 tag

LXIV. IIS Functions

iis_add_server — Creates a new virtual web server

iis_get_dir_security — Gets Directory Security

iis_get_script_map — Gets script mapping on a virtual directory for a specific extension

iis_get_server_by_comment — Return the instance number associated with the Comment

iis_get_server_by_path — Return the instance number associated with the Path

iis_get_server_rights — Gets server rights

iis_get_service_state — Returns the state for the service defined by ServiceId

iis_remove_server — Removes the virtual web server indicated by ServerInstance

iis_set_app_settings — Creates application scope for a virtual directory

iis_set_dir_security — Sets Directory Security

iis_set_script_map — Sets script mapping on a virtual directory

iis_set_server_rights — Sets server rights

iis_start_server — Starts the virtual web server

iis_start_service — Starts the service defined by ServiceId

iis_stop_server — Stops the virtual web server

iis_stop_service — Stops the service defined by ServiceId

LXV. Image

gd_info — Retrieve information about the currently installed GD library

getimagesize — Get the size of an image

image_type_to_extension — Get file extension for image type

image_type_to_mime_type — Get Mime-Type for image-type returned by getimagesize, exif_read_data, exif_thumbnail, exif_imagetype

image2wbmp — Output image to browser or file

imagealphablending — Set the blending mode for an image

imageantialias — Should antialias functions be used or not

imagearc — Draws an arc

imagechar — Draw a character horizontally

imagecharup — Draw a character vertically

imagecolorallocate — Allocate a color for an image

imagecolorallocatealpha — Allocate a color for an image

imagecolorat — Get the index of the color of a pixel

imagecolorclosest — Get the index of the closest color to the specified color

imagecolorclosestalpha — Get the index of the closest color to the specified color + alpha

imagecolorclosesthwb — Get the index of the color which has the hue, white and blackness nearest to the given color

imagecolordeallocate — De-allocate a color for an image

imagecolorexact — Get the index of the specified color

imagecolorexactalpha — Get the index of the specified color + alpha

imagecolormatch — Makes the colors of the palette version of an image more closely match the true color version

imagecolorresolve — Get the index of the specified color or its closest possible alternative

imagecolorresolvealpha — Get the index of the specified color + alpha or its closest possible alternative

imagecolorset — Set the color for the specified palette index

imagecolorsforindex — Get the colors for an index

imagecolorstotal — Find out the number of colors in an image's palette

imagecolortransparent — Define a color as transparent

imageconvolution — Apply a 3x3 convolution matrix, using coefficient and offset

imagecopy — Copy part of an image

imagecopymerge — Copy and merge part of an image

imagecopymergegray — Copy and merge part of an image with gray scale

imagecopyresampled — Copy and resize part of an image with resampling

imagecopyresized — Copy and resize part of an image

imagecreate — Create a new palette based image

imagecreatefromgd2 — Create a new image from GD2 file or URL

imagecreatefromgd2part — Create a new image from a given part of GD2 file or URL

imagecreatefromgd — Create a new image from GD file or URL

imagecreatefromgif — Create a new image from file or URL

imagecreatefromjpeg — Create a new image from file or URL

imagecreatefrompng — Create a new image from file or URL

imagecreatefromstring — Create a new image from the image stream in the string

imagecreatefromwbmp — Create a new image from file or URL

imagecreatefromxbm — Create a new image from file or URL

imagecreatefromxpm — Create a new image from file or URL

imagecreatetruecolor — Create a new true color image

imagedashedline — Draw a dashed line

imagedestroy — Destroy an image

imageellipse — Draw an ellipse

imagefill — Flood fill

imagefilledarc — Draw a partial ellipse and fill it

imagefilledellipse — Draw a filled ellipse

imagefilledpolygon — Draw a filled polygon

imagefilledrectangle — Draw a filled rectangle

imagefilltoborder — Flood fill to specific color

imagefilter — Applies a filter to an image

imagefontheight — Get font height

imagefontwidth — Get font width

imageftbbox — Give the bounding box of a text using fonts via freetype2

imagefttext — Write text to the image using fonts using FreeType 2

imagegammacorrect — Apply a gamma correction to a GD image

imagegd2 — Output GD2 image to browser or file

imagegd — Output GD image to browser or file

imagegif — Output image to browser or file

imagegrabscreen — Captures the whole screen

imagegrabwindow — Captures a window

imageinterlace — Enable or disable interlace

imageistruecolor — Finds whether an image is a truecolor image

imagejpeg — Output image to browser or file

imagelayereffect — Set the alpha blending flag to use the bundled libgd layering effects

imageline — Draw a line

imageloadfont — Load a new font

imagepalettecopy — Copy the palette from one image to another

imagepng — Output a PNG image to either the browser or a file

imagepolygon — Draws a polygon

imagepsbbox — Give the bounding box of a text rectangle using PostScript Type1 fonts

imagepsencodefont — Change the character encoding vector of a font

imagepsextendfont — Extend or condense a font

imagepsfreefont — Free memory used by a PostScript Type 1 font

imagepsloadfont — Load a PostScript Type 1 font from file

imagepsslantfont — Slant a font

imagepstext — Draws a text over an image using PostScript Type1 fonts

imagerectangle — Draw a rectangle

imagerotate — Rotate an image with a given angle

imagesavealpha — Set the flag to save full alpha channel information (as opposed to single-color transparency) when saving PNG images

imagesetbrush — Set the brush image for line drawing

imagesetpixel — Set a single pixel

imagesetstyle — Set the style for line drawing

imagesetthickness — Set the thickness for line drawing

imagesettile — Set the tile image for filling

imagestring — Draw a string horizontally

imagestringup — Draw a string vertically

imagesx — Get image width

imagesy — Get image height

imagetruecolortopalette — Convert a true color image to a palette image

imagettfbbox — Give the bounding box of a text using TrueType fonts

imagettftext — Write text to the image using TrueType fonts

imagetypes — Return the image types supported by this PHP build

imagewbmp — Output image to browser or file

imagexbm — Output XBM image to browser or file

iptcembed — Embed binary IPTC data into a JPEG image

iptcparse — Parse a binary IPTC block into single tags.

jpeg2wbmp — Convert JPEG image file to WBMP image file

png2wbmp — Convert PNG image file to WBMP image file

LXVI. Imagick Image Library

Constants — Imagick class constants

Installation — Installing the Imagick extension

Imagick — Imagick Class

Imagick::adaptiveBlurImage — Adds adaptive blur filter to image

Imagick::adaptiveResizeImage — Adaptively resize image with data dependent triangulation

Imagick::adaptiveSharpenImage — Adaptively sharpen the image

Imagick::adaptiveThresholdImage — Selects a threshold for each pixel based on a range of intensity

Imagick::addImage — Adds new image to Imagick object image list

Imagick::addNoiseImage — Adds random noise to the image

Imagick::affineTransformImage — Transforms an image

Imagick::annotateImage — Annotates an image with text

Imagick::appendImages — Append a set of images

Imagick::averageImages — Average a set of images

Imagick::blackThresholdImage — Forces all pixels below the threshold into black

Imagick::blurImage — Adds blur filter to image

Imagick::borderImage — Surrounds the image with a border

Imagick::charcoalImage — Simulates a charcoal drawing

Imagick::chopImage — Removes a region of an image and trims

Imagick::clear — Clears all resources associated to Imagick object

Imagick::clipImage — Clips along the first path from the 8BIM profile

Imagick::clipPathImage — Clips along the named paths from the 8BIM profile

Imagick::clone — Makes an exact copy of the Imagick object

Imagick::coalesceImages — Composites a set of images

Imagick::colorFloodfillImage — Changes the color value of any pixel that matches target

Imagick::colorizeImage — Blends the fill color with the image

Imagick::clutImage — Replaces colors in the image from a color lookup table

Imagick::combineImages — Combines one or more images into a single image

Imagick::commentImage — Adds a comment to your image

Imagick::compareImageChannels — Returns the difference in one or more images

Imagick::compareImageLayers — Returns the maximum bounding region between images

Imagick::compositeImage — Composite one image onto another

Imagick::__construct — The Imagick constructor

Imagick::contrastImage — Change the contrast of the image

Imagick::contrastStretchImage — Enhances the contrast of a color image

Imagick::convolveImage — Applies a custom convolution kernel to the image

Imagick::cropImage — Extracts a region of the image

Imagick::current — Sets image pointer at the correct sequence

Imagick::cycleColormapImage — Displaces an image's colormap

Imagick::deconstructImages — Returns certain pixel differences between images

Imagick::despeckleImage — Reduces the speckle noise in an image

Imagick::destroy — Destroys the Imagick object

Imagick::drawImage — Renders the ImagickDrawing object on the current image

Imagick::edgeImage — Enhance edges within the image

Imagick::embossImage — Returns a grayscale image with a three-dimensional effect

Imagick::enhanceImage — Improves the quality of a noisy image

Imagick::equalizeImage — Equalizes the image histogram

Imagick::evaluateImage — Applies an expression to an image

Imagick::flattenImages — Merges a sequence of images

Imagick::flipImage — Creates a vertical mirror image

Imagick::flopImage — Creates a horizontal mirror image

Imagick::frameImage — Adds a simulated three-dimensional border

Imagick::fxImage — Evaluate expression for each pixel in the image

Imagick::gammaImage — Gamma-corrects an image

Imagick::gaussianBlurImage — Blurs an image

Imagick::getCompressionQuality — Gets the object compression quality

Imagick::getCompression — Gets the object compression type

Imagick::getCopyright — Returns the ImageMagick API copyright as a string constant

Imagick::getFilename — The filename associated with an image sequence

Imagick::getFormat — Returns the format of the Imagick object

Imagick::getHomeURL — Returns the ImageMagick home URL

Imagick::getImageBackgroundColor — Returns the image background color

Imagick::getImageBlob — Returns the image sequence as a blob

Imagick::getImageBluePrimary — Returns the chromaticy blue primary point

Imagick::getImageBorderColor — Returns the image border color

Imagick::getImageChannelDepth — Gets the depth for a particular image channel

Imagick::getImageChannelDistortion — Compares image channels of an image to a reconstructed image

Imagick::getImageChannelExtrema — Gets the extrema for one or more image channels

Imagick::getImageChannelMean — Gets the mean and standard deviation

Imagick::getImageChannelStatistics — Returns statistics for each channel in the image

Imagick::getImageColormapColor — Returns the color of the specified colormap index

Imagick::getImageColorspace — Gets the image colorspace

Imagick::getImageColors — Gets the number of unique colors in the image

Imagick::getImageCompose — Returns the composite operator associated with the image

Imagick::getImageDelay — Gets the image delay

Imagick::getImageDepth — Gets the image depth

Imagick::getImageDispose — Gets the image disposal method

Imagick::getImageDistortion — Compares an image to a reconstructed image

Imagick::getImageExtrema — Gets the extrema for the image

Imagick::getImageFilename — Returns the filename of a particular image in a sequence

Imagick::getImageSize — Returns the image length in bytes

Imagick::getImageLength — Returns the image length in bytes

Imagick::getImageFormat — Returns the format of a particular image in a sequence

Imagick::getImageGamma — Gets the image gamma

Imagick::getImageGeometry — Gets the width and height as an associative array

Imagick::getImageGreenPrimary — Returns the chromaticy green primary point

Imagick::getImageHeight — Returns the image height

Imagick::getImageHistogram — Gets the image histogram

Imagick::getImageIndex — Gets the index of the current active image

Imagick::getIteratorIndex — Gets the index of the current active image

Imagick::getImageInterlaceScheme — Gets the image interlace scheme

Imagick::getImageInterpolateMethod — Returns the interpolation method

Imagick::getImageIterations — Gets the image iterations

Imagick::getImageMatteColor — Returns the image matte color

Imagick::getImageMatte — Return if the image has a matte channel

Imagick::getImagePage — Returns the page geometry

Imagick::getImagePixelColor — Returns the color of the specified pixel

Imagick::getImageProfile — Returns the named image profile

Imagick::getImageProfiles — Returns the image profiles

Imagick::getImageProperty — Returns the named image property

Imagick::getImageProperties — Returns the image properties

Imagick::getImageRedPrimary — Returns the chromaticy red primary point

Imagick::getImageRegion — Extracts a region of the image

Imagick::getImageRenderingIntent — Gets the image rendering intent

Imagick::getImageResolution — Gets the image X and Y resolution

Imagick::getImageScene — Gets the image scene

Imagick::getImageSignature — Generates an SHA-256 message digest

Imagick::getImageTicksPerSecond — Gets the image ticks-per-second

Imagick::getImageTotalInkDensity — Gets the image total ink density

Imagick::getImageType — Gets the potential image type

Imagick::getImageUnits — Gets the image units of resolution

Imagick::getImageVirtualPixelMethod — Returns the virtual pixel method

Imagick::getImageWhitePoint — Returns the chromaticy white point

Imagick::getImageWidth — Returns the image width

Imagick::getImage — Returns a new Imagick object

Imagick::getInterlaceScheme — Gets the object interlace scheme

Imagick::getImageOrientation — Gets the image orientation.

Imagick::getNumberImages — Returns the number of images in the object

Imagick::getOption — Returns a value associated with the specified key

Imagick::getPackageName — Returns the ImageMagick package name

Imagick::getPage — Returns the page geometry

Imagick::getPixelIterator — Returns a MagickPixelIterator

Imagick::getPixelRegionIterator — Get an ImagickPixelIterator for an image section

Imagick::getQuantumDepth — Gets the quantum depth

Imagick::getQuantumRange — Returns the Imagick quantum range

Imagick::getReleaseDate — Returns the ImageMagick release date

Imagick::getResourceLimit — Returns the specified resource limit

Imagick::getResource — Returns the specified resource's memory usage

Imagick::getSamplingFactors — Gets the horizontal and vertical sampling factor

Imagick::getSizeOffset — Returns the size offset

Imagick::getSize — Returns the size associated with the Imagick object

Imagick::getVersion — Returns the ImageMagick API version

Imagick::hasNextImage — Checks if the object has more images

Imagick::hasPreviousImage — Checks if the object has a previous image

Imagick::identifyImage — Identifies an image and fetches attributes

Imagick::implodeImage — Creates a new image as a copy

Imagick::labelImage — Adds a label to an image

Imagick::levelImage — Adjusts the levels of an image

Imagick::linearStretchImage — Stretches with saturation the image intensity

Imagick::magnifyImage — Scales an image proportionally 2x

Imagick::matteFloodfillImage — Changes the transparency value of a color

Imagick::medianFilterImage — Applies a digital filter

Imagick::minifyImage — Scales an image proportionally to half its size

Imagick::modulateImage — Control the brightness, saturation, and hue

Imagick::montageImage — Creates a composite image

Imagick::morphImages — Method morphs a set of images

Imagick::compareImages — Compares an image to a reconstructed image

Imagick::mosaicImages — Forms a mosaic from images

Imagick::motionBlurImage — Simulates motion blur

Imagick::negateImage — Negates the colors in the reference image

Imagick::distortImage — Distorts an image using various distortion methods

Imagick::newImage — Creates a new image

Imagick::setImage — Replaces image in the object

Imagick::setImageOpacity — Sets the image opacity level

Imagick::newPseudoImage — Creates a new image

Imagick::nextImage — Moves to the next image

Imagick::normalizeImage — Enhances the contrast of a color image

Imagick::oilPaintImage — Simulates an oil painting

Imagick::optimizeImageLayers — Removes repeated portions of images to optimize

Imagick::paintOpaqueImage — Change any pixel that matches color

Imagick::paintTransparentImage — Changes any pixel that matches color with the color defined by fill

Imagick::pingImageBlob — Quickly fetch attributes

Imagick::pingImageFile — Get basic image attributes in a lightweight manner

Imagick::pingImage — Fetch basic attributes about the image

Imagick::posterizeImage — Reduces the image to a limited number of color level

Imagick::previousImage — Move to the previous image in the object

Imagick::profileImage — Adds or removes a profile from an image

Imagick::queryFormats — Returns formats supported by Imagick

Imagick::radialBlurImage — Radial blurs an image

Imagick::raiseImage — Creates a simulated 3d button-like effect

Imagick::randomThresholdImage — Creates a high-contrast, two-color image

Imagick::readImageBlob — Reads image from a binary string

Imagick::readImageFile — Reads image from open filehandle

Imagick::readImage — Reads image from filename

Imagick::reduceNoiseImage — Smooths the contours of an image

Imagick::removeImageProfile — Removes the named image profile and returns it

Imagick::removeImage — Removes an image from the image list

Imagick::render — Renders all preceding drawing commands

Imagick::resampleImage — Resample image to desired resolution

Imagick::resizeImage — Scales an image

Imagick::rollImage — Offsets an image

Imagick::rotateImage — Rotates an image

Imagick::sampleImage — Scales an image with pixel sampling

Imagick::scaleImage — Scales the size of an image

Imagick::separateImageChannel — Separates a channel from the image

Imagick::sepiaToneImage — Sepia tones an image

Imagick::setBackgroundColor — Sets the object's default background color

Imagick::setCompressionQuality — Sets the object's default compression quality

Imagick::setCompression — Sets the object's default compression type

Imagick::setFilename — Sets the filename before you read or write the image

Imagick::setFirstIterator — Sets the Imagick iterator to the first image

Imagick::setLastIterator — Sets the Imagick iterator to the last image

Imagick::setFormat — Sets the format of the Imagick object

Imagick::setImageBackgroundColor — Sets the image background color

Imagick::setImageBias — Sets the image bias for any method that convolves an image

Imagick::setImageBluePrimary — Sets the image chromaticity blue primary point

Imagick::setImageBorderColor — Sets the image border color

Imagick::setImageChannelDepth — Sets the depth of a particular image channel

Imagick::setImageColormapColor — Sets the color of the specified colormap index

Imagick::setImageColorspace — Sets the image colorspace

Imagick::setImageCompose — Sets the image composite operator

Imagick::setImageCompression — Sets the image compression

Imagick::setImageDelay — Sets the image delay

Imagick::setImageDepth — Sets the image depth

Imagick::setImageDispose — Sets the image disposal method

Imagick::setImageExtent — Sets the image size

Imagick::setImageFilename — Sets the filename of a particular image

Imagick::setImageFormat — Sets the format of a particular image

Imagick::setImageGamma — Sets the image gamma

Imagick::setImageGreenPrimary — Sets the image chromaticity green primary point

Imagick::setImageIndex — Set the iterator position

Imagick::setIteratorIndex — Set the iterator position

Imagick::setImageInterlaceScheme — Sets the image compression

Imagick::setImageInterpolateMethod — Sets the image interpolate pixel method

Imagick::setImageIterations — Sets the image iterations

Imagick::setImageMatteColor — Sets the image matte color

Imagick::setImageMatte — Sets the image matte channel

Imagick::setImagePage — Sets the page geometry of the image

Imagick::setImageProfile — Adds a named profile to the Imagick object

Imagick::setImageProperty — Sets an image property

Imagick::setImageRedPrimary — Sets the image chromaticity red primary point

Imagick::setImageRenderingIntent — Sets the image rendering intent

Imagick::setImageResolution — Sets the image resolution

Imagick::setImageScene — Sets the image scene

Imagick::setImageTicksPerSecond — Sets the image ticks-per-second

Imagick::setImageType — Sets the image type

Imagick::setImageUnits — Sets the image units of resolution

Imagick::setImageVirtualPixelMethod — Sets the image virtual pixel method

Imagick::setImageWhitePoint — Sets the image chromaticity white point

Imagick::setInterlaceScheme — Sets the image compression

Imagick::setImageOrientation — Sets the image orientation.

Imagick::setOption — Set an option

Imagick::setPage — Sets the page geometry of the Imagick object

Imagick::setResolution — Sets the image resolution

Imagick::setResourceLimit — Sets the limit for a particular resource in megabytes

Imagick::setSamplingFactors — Sets the image sampling factors

Imagick::setSizeOffset — Sets the size and offset of the Imagick object

Imagick::setSize — Sets the size of the Imagick object

Imagick::setType — Sets the image type attribute

Imagick::shadeImage — Creates a 3D effect

Imagick::shadowImage — Simulates an image shadow

Imagick::sharpenImage — Sharpens an image

Imagick::shaveImage — Shaves pixels from the image edges

Imagick::shearImage — Creating a parallelogram

Imagick::sigmoidalContrastImage — Adjusts the contrast of an image

Imagick::sketchImage — Simulates a pencil sketch

Imagick::solarizeImage — Applies a solarizing effect to the image

Imagick::spliceImage — Splices a solid color into the image

Imagick::spreadImage — Randomly displaces each pixel in a block

Imagick::steganoImage — Hides a digital watermark within the image

Imagick::stereoImage — Composites two images

Imagick::stripImage — Strips an image of all profiles and comments

Imagick::swirlImage — Swirls the pixels about the center of the image

Imagick::textureImage — Repeatedly tiles the texture image

Imagick::thresholdImage — Changes the value of individual pixels based on a threshold

Imagick::thumbnailImage — Changes the size of an image

Imagick::tintImage — Applies a color vector to each pixel in the image

Imagick::transverseImage — Creates a horizontal mirror image

Imagick::trimImage — Remove edges from the image

Imagick::uniqueImageColors — Discards all but one of any pixel color

Imagick::unsharpMaskImage — Sharpens an image

Imagick::valid — Checks if the current item is valid

Imagick::vignetteImage — Adds vignette filter to the image

Imagick::waveImage — Adds wave filter to the image

Imagick::whiteThresholdImage — Force all pixels above the threshold into white

Imagick::writeImages — Writes an image or image sequence

Imagick::writeImage — Writes an image to the specified filename

Imagick::displayImage — Displays an image

Imagick::displayImages — Displays an image or image sequence

Imagick::cropThumbnailImage — Creates a crop thumbnail

Imagick::roundCorners — Rounds image corners

Imagick::polaroidImage — Simulates a Polaroid picture

Imagick::queryFonts — Returns the configured fonts

Imagick::queryFontMetrics — Returns an array representing the font metrics

ImagickDraw::affine — Adjusts the current affine transformation matrix

ImagickDraw::annotation — Draws text on the image

ImagickDraw::arc — Draws an arc

ImagickDraw::bezier — Draws a bezier curve

ImagickDraw::circle — Draws a circle

ImagickDraw::clear — Clears the ImagickDraw

ImagickDraw::clone — Makes an exact copy of the specified ImagickDraw object

ImagickDraw::color — Draws color on image

ImagickDraw::comment — Adds a comment

ImagickDraw::composite — Composites an image onto the current image

ImagickDraw::__construct — The ImagickDraw constructor

ImagickDraw::destroy — Frees all associated resources

ImagickDraw::ellipse — Draws an ellipse on the image

ImagickDraw::getClipPath — Obtains the current clipping path ID

ImagickDraw::getClipRule — Returns the current polygon fill rule

ImagickDraw::getClipUnits — Returns the interpretation of clip path units

ImagickDraw::getFillColor — Returns the fill color

ImagickDraw::getFillOpacity — Returns the opacity used when drawing

ImagickDraw::getFillRule — Returns the fill rule

ImagickDraw::getFontFamily — Returns the font family

ImagickDraw::getFontSize — Returns the font pointsize

ImagickDraw::getFontStyle — Returns the font style

ImagickDraw::getFontWeight — Returns the font weight

ImagickDraw::getFont — Returns the font

ImagickDraw::getGravity — Returns the text placement gravity

ImagickDraw::getStrokeAntialias — Returns the current stroke antialias setting

ImagickDraw::getStrokeColor — Returns the color used for stroking object outlines

ImagickDraw::getStrokeDashArray — Returns an array representing the pattern of dashes and gaps used to stroke paths

ImagickDraw::getStrokeDashOffset — Returns the offset into the dash pattern to start the dash

ImagickDraw::getStrokeLineCap — Returns the shape to be used at the end of open subpaths when they are stroked

ImagickDraw::getStrokeLineJoin — Returns the shape to be used at the corners of paths when they are stroked

ImagickDraw::getStrokeMiterLimit — Returns the stroke miter limit

ImagickDraw::getStrokeOpacity — Returns the opacity of stroked object outlines

ImagickDraw::getStrokeWidth — Returns the width of the stroke used to draw object outlines

ImagickDraw::getTextAlignment — Returns the text alignment

ImagickDraw::getTextAntialias — Returns the current text antialias setting

ImagickDraw::getTextDecoration — Returns the text decoration

ImagickDraw::getTextEncoding — Returns the code set used for text annotations

ImagickDraw::getTextUnderColor — Returns the text under color

ImagickDraw::getVectorGraphics — Returns a string containing vector graphics

ImagickDraw::line — Draws a line

ImagickDraw::matte — Paints on the image's opacity channel

ImagickDraw::pathClose — Adds a path element to the current path

ImagickDraw::pathCurveToAbsolute — Draws a cubic Bezier curve

ImagickDraw::pathCurveToQuadraticBezierAbsolute — Draws a quadratic Bezier curve

ImagickDraw::pathCurveToQuadraticBezierRelative — Draws a quadratic Bezier curve

ImagickDraw::pathCurveToQuadraticBezierSmoothAbsolute — Draws a quadratic Bezier curve

ImagickDraw::pathCurveToQuadraticBezierSmoothRelative — Draws a quadratic Bezier curve

ImagickDraw::pathCurveToRelative — Draws a cubic Bezier curve

ImagickDraw::pathCurveToSmoothAbsolute — Draws a cubic Bezier curve

ImagickDraw::pathCurveToSmoothRelative — Draws a cubic Bezier curve

ImagickDraw::pathEllipticArcAbsolute — Draws an elliptical arc

ImagickDraw::pathEllipticArcRelative — Draws an elliptical arc

ImagickDraw::pathFinish — Terminates the current path

ImagickDraw::pathLineToAbsolute — Draws a line path

ImagickDraw::pathLineToHorizontalAbsolute — Draws a horizontal line path

ImagickDraw::pathLineToHorizontalRelative — Draws a horizontal line

ImagickDraw::pathLineToRelative — Draws a line path

ImagickDraw::pathLineToVerticalAbsolute — Draws a vertical line

ImagickDraw::pathLineToVerticalRelative — Draws a vertical line path

ImagickDraw::pathMoveToAbsolute — Starts a new sub-path

ImagickDraw::pathMoveToRelative — Starts a new sub-path

ImagickDraw::pathStart — Declares the start of a path drawing list

ImagickDraw::point — Draws a point

ImagickDraw::polygon — Draws a polygon

ImagickDraw::polyline — Draws a polyline

ImagickDraw::popClipPath — Terminates a clip path definition

ImagickDraw::popDefs — Terminates a definition list

ImagickDraw::pop — Destroys the current ImagickDraw in the stack, and returns to the previously pushed ImagickDraw

ImagickDraw::popPattern — Terminates a pattern definition

ImagickDraw::pushClipPath — Starts a clip path definition

ImagickDraw::pushDefs — Indicates that following commands create named elements for early processing

ImagickDraw::push — Clones the current ImagickDraw and pushes it to the stack

ImagickDraw::pushPattern — Indicates that subsequent commands up to a ImagickDraw::opPattern() command comprise the definition of a named pattern

ImagickDraw::rectangle — Draws a rectangle

ImagickDraw::render — Renders all preceding drawing commands onto the image

ImagickDraw::rotate — Applies the specified rotation to the current coordinate space

ImagickDraw::roundRectangle — Draws a rounted rectangle

ImagickDraw::scale — Adjusts the scaling factor

ImagickDraw::setClipPath — Associates a named clipping path with the image

ImagickDraw::setClipRule — Set the polygon fill rule to be used by the clipping path

ImagickDraw::setClipUnits — Sets the interpretation of clip path units

ImagickDraw::setFillAlpha — Sets the opacity to use when drawing using the fill color or fill texture

ImagickDraw::setFillColor — Sets the fill color to be used for drawing filled objects

ImagickDraw::setFillOpacity — Sets the opacity to use when drawing using the fill color or fill texture

ImagickDraw::setFillPatternURL — Sets the URL to use as a fill pattern for filling objects

ImagickDraw::setFillRule — Sets the fill rule to use while drawing polygons

ImagickDraw::setFontFamily — Sets the font family to use when annotating with text

ImagickDraw::setFontSize — Sets the font pointsize to use when annotating with text

ImagickDraw::setFontStretch — Sets the font stretch to use when annotating with text

ImagickDraw::setFontStyle — Sets the font style to use when annotating with text

ImagickDraw::setFontWeight — Sets the font weight

ImagickDraw::setFont — Sets the fully-specified font to use when annotating with text

ImagickDraw::setGravity — Sets the text placement gravity

ImagickDraw::setStrokeAlpha — Specifies the opacity of stroked object outlines

ImagickDraw::setStrokeAntialias — Controls whether stroked outlines are antialiased

ImagickDraw::setStrokeColor — Sets the color used for stroking object outlines

ImagickDraw::setStrokeDashArray — Specifies the pattern of dashes and gaps used to stroke paths

ImagickDraw::setStrokeDashOffset — Specifies the offset into the dash pattern to start the dash

ImagickDraw::setStrokeLineCap — Specifies the shape to be used at the end of open subpaths when they are stroked

ImagickDraw::setStrokeLineJoin — Specifies the shape to be used at the corners of paths when they are stroked

ImagickDraw::setStrokeMiterLimit — Specifies the miter limit

ImagickDraw::setStrokeOpacity — Specifies the opacity of stroked object outlines

ImagickDraw::setStrokePatternURL — Sets the pattern used for stroking object outlines

ImagickDraw::setStrokeWidth — Sets the width of the stroke used to draw object outlines

ImagickDraw::setTextAlignment — Specifies a text alignment

ImagickDraw::setTextAntialias — Controls whether text is antialiased

ImagickDraw::setTextDecoration — Specifies a decoration

ImagickDraw::setTextEncoding — Specifies specifies the text code set

ImagickDraw::setTextUnderColor — Specifies the color of a background rectangle

ImagickDraw::setVectorGraphics — Sets the vector graphics

ImagickDraw::setViewbox — Sets the overall canvas size

ImagickDraw::skewX — Skews the current coordinate system in the horizontal direction

ImagickDraw::skewY — Skews the current coordinate system in the vertical direction

ImagickDraw::translate — Applies a translation to the current coordinate system

ImagickPixel::clear — Clears resources associated with this object

ImagickPixel::__construct — The ImagickPixel constructor

ImagickPixel::destroy — Deallocates resources associated with this object

ImagickPixel::getColor — Returns the color

ImagickPixel::getColorCount — Returns the color count associated with this color

ImagickPixel::getColorValue — Gets the normalized value of the provided color channel

ImagickPixel::getHSL — Returns the normalized HSL color of the ImagickPixel object

ImagickPixel::isSimilar — Check the distance between this color and another

ImagickPixel::setColorValue — Sets the normalized value of one of the channels

ImagickPixel::setColor — Sets the color

ImagickPixel::setHSL — Sets the normalized HSL color

ImagickPixelIterator::clear — Clear resources associated with a PixelIterator

ImagickPixelIterator::__construct — The ImagickPixelIterator constructor

ImagickPixelIterator::destroy — Deallocates resources associated with a PixelIterator

ImagickPixelIterator::getCurrentIteratorRow — Returns the current row of ImagickPixel objects

ImagickPixelIterator::getIteratorRow — Returns the current pixel iterator row

ImagickPixelIterator::getNextIteratorRow — Returns the next row of the pixel iterator

ImagickPixelIterator::getPreviousIteratorRow — Returns the previous row

ImagickPixelIterator::newPixelIterator — Returns a new pixel iterator

ImagickPixelIterator::newPixelRegionIterator — Returns a new pixel iterator

ImagickPixelIterator::resetIterator — Resets the pixel iterator

ImagickPixelIterator::setIteratorFirstRow — Sets the pixel iterator to the first pixel row

ImagickPixelIterator::setIteratorLastRow — Sets the pixel iterator to the last pixel row

ImagickPixelIterator::setIteratorRow — Set the pixel iterator row

ImagickPixelIterator::syncIterator — Syncs the pixel iterator

LXVII. IMAP

imap_8bit — Convert an 8bit string to a quoted-printable string

imap_alerts — Returns all IMAP alert messages that have occurred

imap_append — Append a string message to a specified mailbox

imap_base64 — Decode BASE64 encoded text

imap_binary — Convert an 8bit string to a base64 string

imap_body — Read the message body

imap_bodystruct — Read the structure of a specified body section of a specific message

imap_check — Check current mailbox

imap_clearflag_full — Clears flags on messages

imap_close — Close an IMAP stream

imap_createmailbox — Create a new mailbox

imap_delete — Mark a message for deletion from current mailbox

imap_deletemailbox — Delete a mailbox

imap_errors — Returns all of the IMAP errors that have occured

imap_expunge — Delete all messages marked for deletion

imap_fetch_overview — Read an overview of the information in the headers of the given message

imap_fetchbody — Fetch a particular section of the body of the message

imap_fetchheader — Returns header for a message

imap_fetchstructure — Read the structure of a particular message

imap_get_quota — Retrieve the quota level settings, and usage statics per mailbox

imap_get_quotaroot — Retrieve the quota settings per user

imap_getacl — Gets the ACL for a given mailbox

imap_getmailboxes — Read the list of mailboxes, returning detailed information on each one

imap_getsubscribed — List all the subscribed mailboxes

imap_header — Alias of imap_headerinfo()

imap_headerinfo — Read the header of the message

imap_headers — Returns headers for all messages in a mailbox

imap_last_error — Gets the last IMAP error that occurred during this page request

imap_list — Read the list of mailboxes

imap_listmailbox — Alias of imap_list()

imap_listscan — Returns the list of mailboxes that matches the given text

imap_listsubscribed — Alias of imap_lsub()

imap_lsub — List all the subscribed mailboxes

imap_mail_compose — Create a MIME message based on given envelope and body sections

imap_mail_copy — Copy specified messages to a mailbox

imap_mail_move — Move specified messages to a mailbox

imap_mail — Send an email message

imap_mailboxmsginfo — Get information about the current mailbox

imap_mime_header_decode — Decode MIME header elements

imap_msgno — Gets the message sequence number for the given UID

imap_num_msg — Gets the number of messages in the current mailbox

imap_num_recent — Gets the number of recent messages in current mailbox

imap_open — Open an IMAP stream to a mailbox

imap_ping — Check if the IMAP stream is still active

imap_qprint — Convert a quoted-printable string to an 8 bit string

imap_renamemailbox — Rename an old mailbox to new mailbox

imap_reopen — Reopen IMAP stream to new mailbox

imap_rfc822_parse_adrlist — Parses an address string

imap_rfc822_parse_headers — Parse mail headers from a string

imap_rfc822_write_address — Returns a properly formatted email address given the mailbox, host, and personal info

imap_savebody — Save a specific body section to a file

imap_scanmailbox — Alias of imap_listscan()

imap_search — This function returns an array of messages matching the given search criteria

imap_set_quota — Sets a quota for a given mailbox

imap_setacl — Sets the ACL for a giving mailbox

imap_setflag_full — Sets flags on messages

imap_sort — Gets and sort messages

imap_status — Returns status information on a mailbox

imap_subscribe — Subscribe to a mailbox

imap_thread — Returns a tree of threaded message

imap_timeout — Set or fetch imap timeout

imap_uid — This function returns the UID for the given message sequence number

imap_undelete — Unmark the message which is marked deleted

imap_unsubscribe — Unsubscribe from a mailbox

imap_utf7_decode — Decodes a modified UTF-7 encoded string

imap_utf7_encode — Converts ISO-8859-1 string to modified UTF-7 text

imap_utf8 — Converts MIME-encoded text to UTF-8

LXVIII. Informix

ifx_affected_rows — Get number of rows affected by a query

ifx_blobinfile_mode — Set the default blob mode for all select queries

ifx_byteasvarchar — Set the default byte mode

ifx_close — Close Informix connection

ifx_connect — Open Informix server connection

ifx_copy_blob — Duplicates the given blob object

ifx_create_blob — Creates an blob object

ifx_create_char — Creates an char object

ifx_do — Execute a previously prepared SQL-statement

ifx_error — Returns error code of last Informix call

ifx_errormsg — Returns error message of last Informix call

ifx_fetch_row — Get row as an associative array

ifx_fieldproperties — List of SQL fieldproperties

ifx_fieldtypes — List of Informix SQL fields

ifx_free_blob — Deletes the blob object

ifx_free_char — Deletes the char object

ifx_free_result — Releases resources for the query

ifx_get_blob — Return the content of a blob object

ifx_get_char — Return the content of the char object

ifx_getsqlca — Get the contents of sqlca.sqlerrd[0..5] after a query

ifx_htmltbl_result — Formats all rows of a query into a HTML table

ifx_nullformat — Sets the default return value on a fetch row

ifx_num_fields — Returns the number of columns in the query

ifx_num_rows — Count the rows already fetched from a query

ifx_pconnect — Open persistent Informix connection

ifx_prepare — Prepare an SQL-statement for execution

ifx_query — Send Informix query

ifx_textasvarchar — Set the default text mode

ifx_update_blob — Updates the content of the blob object

ifx_update_char — Updates the content of the char object

ifxus_close_slob — Deletes the slob object

ifxus_create_slob — Creates an slob object and opens it

ifxus_free_slob — Deletes the slob object

ifxus_open_slob — Opens an slob object

ifxus_read_slob — Reads nbytes of the slob object

ifxus_seek_slob — Sets the current file or seek position

ifxus_tell_slob — Returns the current file or seek position

ifxus_write_slob — Writes a string into the slob object

LXIX. Informix (PDO)

PDO_INFORMIX DSN — Connecting to Informix databases

LXX. Ingres II

ingres_autocommit — Switch autocommit on or off

ingres_close — Close an Ingres II database connection

ingres_commit — Commit a transaction

ingres_connect — Open a connection to an Ingres database

ingres_cursor — Gets a cursor name for a given link resource

ingres_errno — Gets the last ingres error number generated

ingres_error — Gets a meaningful error message for the last error generated

ingres_errsqlstate — Gets the last SQLSTATE error code generated

ingres_fetch_array — Fetch a row of result into an array

ingres_fetch_object — Fetch a row of result into an object

ingres_fetch_row — Fetch a row of result into an enumerated array

ingres_field_length — Get the length of a field

ingres_field_name — Get the name of a field in a query result

ingres_field_nullable — Test if a field is nullable

ingres_field_precision — Get the precision of a field

ingres_field_scale — Get the scale of a field

ingres_field_type — Get the type of a field in a query result

ingres_num_fields — Get the number of fields returned by the last query

ingres_num_rows — Get the number of rows affected or returned by the last query

ingres_pconnect — Open a persistent connection to an Ingres II database

ingres_query — Send a SQL query to Ingres II

ingres_rollback — Roll back a transaction

LXXI. IRC Gateway

ircg_channel_mode — Set channel mode flags for user

ircg_disconnect — Close connection to server

ircg_eval_ecmascript_params — Decodes a list of JS-encoded parameters

ircg_fetch_error_msg — Returns the error from previous IRCG operation

ircg_get_username — Get username for connection

ircg_html_encode — Encodes HTML preserving output

ircg_ignore_add — Add a user to your ignore list on a server

ircg_ignore_del — Remove a user from your ignore list on a server

ircg_invite — Invites nickname to channel

ircg_is_conn_alive — Check connection status

ircg_join — Join a channel on a connected server

ircg_kick — Kick a user out of a channel on server

ircg_list — List topic/user count of channel(s)

ircg_lookup_format_messages — Check for the existence of a format message set

ircg_lusers — IRC network statistics

ircg_msg — Send message to channel or user on server

ircg_names — Query visible usernames

ircg_nick — Change nickname on server

ircg_nickname_escape — Encode special characters in nickname to be IRC-compliant

ircg_nickname_unescape — Decodes encoded nickname

ircg_notice — Send a notice to a user on server

ircg_oper — Elevates privileges to IRC OPER

ircg_part — Leave a channel on server

ircg_pconnect — Connect to an IRC server

ircg_register_format_messages — Register a format message set

ircg_set_current — Set current connection for output

ircg_set_file — Set logfile for connection

ircg_set_on_die — Set action to be executed when connection dies

ircg_topic — Set topic for channel on server

ircg_who — Queries server for WHO information

ircg_whois — Query server for user information

LXXII. Java

java_last_exception_clear — Clear last Java exception

java_last_exception_get — Get last Java exception

LXXIII. JSON

json_decode — Decodes a JSON string

json_encode — Returns the JSON representation of a value

LXXIV. kadm5

kadm5_chpass_principal — Changes the principal's password

kadm5_create_principal — Creates a kerberos principal with the given parameters

kadm5_delete_principal — Deletes a kerberos principal

kadm5_destroy — Closes the connection to the admin server and releases all related resources

kadm5_flush — Flush all changes to the Kerberos database, leaving the connection to the Kerberos admin server open

kadm5_get_policies — Gets all policies from the Kerberos database

kadm5_get_principal — Gets the principal's entries from the Kerberos database

kadm5_get_principals — Gets all principals from the Kerberos database

kadm5_init_with_password — Opens a connection to the KADM5 library and initializes any neccessary state information

kadm5_modify_principal — Modifies a kerberos principal with the given parameters

LXXV. LDAP

ldap_8859_to_t61 — Translate 8859 characters to t61 characters

ldap_add — Add entries to LDAP directory

ldap_bind — Bind to LDAP directory

ldap_close — Alias of ldap_unbind()

ldap_compare — Compare value of attribute found in entry specified with DN

ldap_connect — Connect to an LDAP server

ldap_count_entries — Count the number of entries in a search

ldap_delete — Delete an entry from a directory

ldap_dn2ufn — Convert DN to User Friendly Naming format

ldap_err2str — Convert LDAP error number into string error message

ldap_errno — Return the LDAP error number of the last LDAP command

ldap_error — Return the LDAP error message of the last LDAP command

ldap_explode_dn — Splits DN into its component parts

ldap_first_attribute — Return first attribute

ldap_first_entry — Return first result id

ldap_first_reference — Return first reference

ldap_free_result — Free result memory

ldap_get_attributes — Get attributes from a search result entry

ldap_get_dn — Get the DN of a result entry

ldap_get_entries — Get all result entries

ldap_get_option — Get the current value for given option

ldap_get_values_len — Get all binary values from a result entry

ldap_get_values — Get all values from a result entry

ldap_list — Single-level search

ldap_mod_add — Add attribute values to current attributes

ldap_mod_del — Delete attribute values from current attributes

ldap_mod_replace — Replace attribute values with new ones

ldap_modify — Modify an LDAP entry

ldap_next_attribute — Get the next attribute in result

ldap_next_entry — Get next result entry

ldap_next_reference — Get next reference

ldap_parse_reference — Extract information from reference entry

ldap_parse_result — Extract information from result

ldap_read — Read an entry

ldap_rename — Modify the name of an entry

ldap_sasl_bind — Bind to LDAP directory using SASL

ldap_search — Search LDAP tree

ldap_set_option — Set the value of the given option

ldap_set_rebind_proc — Set a callback function to do re-binds on referral chasing

ldap_sort — Sort LDAP result entries

ldap_start_tls — Start TLS

ldap_t61_to_8859 — Translate t61 characters to 8859 characters

ldap_unbind — Unbind from LDAP directory

LXXVI. libxml

libxml_clear_errors — Clear libxml error buffer

libxml_get_errors — Retrieve array of errors

libxml_get_last_error — Retrieve last error from libxml

libxml_set_streams_context — Set the streams context for the next libxml document load or write

libxml_use_internal_errors — Disable libxml errors and allow user to fetch error information as needed

LXXVII. Lotus Notes

notes_body — Open the message msg_number in the specified mailbox on the specified server (leave serv

notes_copy_db — Copy a Lotus Notes database

notes_create_db — Create a Lotus Notes database

notes_create_note — Create a note using form form_name

notes_drop_db — Drop a Lotus Notes database

notes_find_note — Returns a note id found in database_name

notes_header_info — Open the message msg_number in the specified mailbox on the specified server (leave serv

notes_list_msgs — Returns the notes from a selected database_name

notes_mark_read — Mark a note_id as read for the User user_name

notes_mark_unread — Mark a note_id as unread for the User user_name

notes_nav_create — Create a navigator name, in database_name

notes_search — Find notes that match keywords in database_name

notes_unread — Returns the unread note id's for the current User user_name

notes_version — Get the version Lotus Notes

LXXVIII. LZF

lzf_compress — LZF compression

lzf_decompress — LZF decompression

lzf_optimized_for — Determines what LZF extension was optimized for

LXXIX. Mail

ezmlm_hash — Calculate the hash value needed by EZMLM

mail — Send mail

LXXX. Mailparse

mailparse_determine_best_xfer_encoding — Gets the best way of encoding

mailparse_msg_create — Create a mime mail resource

mailparse_msg_extract_part_file — Extracts/decodes a message section

mailparse_msg_extract_part — Extracts/decodes a message section

mailparse_msg_extract_whole_part_file — Extracts a message section including headers without decoding the transfer encoding

mailparse_msg_free — Frees a MIME resource

mailparse_msg_get_part_data — Returns an associative array of info about the message

mailparse_msg_get_part — Returns a handle on a given section in a mimemessage

mailparse_msg_get_structure — Returns an array of mime section names in the supplied message

mailparse_msg_parse_file — Parses a file

mailparse_msg_parse — Incrementally parse data into buffer

mailparse_rfc822_parse_addresses — Parse RFC 822 compliant addresses

mailparse_stream_encode — Streams data from source file pointer, apply encoding and write to destfp

mailparse_uudecode_all — Scans the data from fp and extract each embedded uuencoded file

LXXXI. Math

abs — Absolute value

acos — Arc cosine

acosh — Inverse hyperbolic cosine

asin — Arc sine

asinh — Inverse hyperbolic sine

atan2 — Arc tangent of two variables

atan — Arc tangent

atanh — Inverse hyperbolic tangent

base_convert — Convert a number between arbitrary bases

bindec — Binary to decimal

ceil — Round fractions up

cos — Cosine

cosh — Hyperbolic cosine

decbin — Decimal to binary

dechex — Decimal to hexadecimal

decoct — Decimal to octal

deg2rad — Converts the number in degrees to the radian equivalent

exp — Calculates the exponent of e

expm1 — Returns exp(number) - 1, computed in a way that is accurate even when the value of number is close to zero

floor — Round fractions down

fmod — Returns the floating point remainder (modulo) of the division of the arguments

getrandmax — Show largest possible random value

hexdec — Hexadecimal to decimal

hypot — Calculate the length of the hypotenuse of a right-angle triangle

is_finite — Finds whether a value is a legal finite number

is_infinite — Finds whether a value is infinite

is_nan — Finds whether a value is not a number

lcg_value — Combined linear congruential generator

log10 — Base-10 logarithm

log1p — Returns log(1 + number), computed in a way that is accurate even when the value of number is close to zero

log — Natural logarithm

max — Find highest value

min — Find lowest value

mt_getrandmax — Show largest possible random value

mt_rand — Generate a better random value

mt_srand — Seed the better random number generator

octdec — Octal to decimal

pi — Get value of pi

pow — Exponential expression

rad2deg — Converts the radian number to the equivalent number in degrees

rand — Generate a random integer

round — Rounds a float

sin — Sine

sinh — Hyperbolic sine

sqrt — Square root

srand — Seed the random number generator

tan — Tangent

tanh — Hyperbolic tangent

LXXXII. MaxDB

maxdb_affected_rows — Gets the number of affected rows in a previous MaxDB operation

maxdb_autocommit — Turns on or off auto-commiting database modifications

maxdb_bind_param — Alias of maxdb_stmt_bind_param()

maxdb_bind_result — Alias of maxdb_stmt_bind_result()

maxdb_change_user — Changes the user of the specified database connection

maxdb_character_set_name — Returns the default character set for the database connection

maxdb_client_encoding — Alias of maxdb_character_set_name()

maxdb_close_long_data — Alias of maxdb_stmt_close_long_data()

maxdb_close — Closes a previously opened database connection

maxdb_commit — Commits the current transaction

maxdb_connect_errno — Returns the error code from last connect call

maxdb_connect_error — Returns a string description of the last connect error

maxdb_connect — Open a new connection to the MaxDB server

maxdb_data_seek — Adjusts the result pointer to an arbitary row in the result

maxdb_debug — Performs debugging operations

maxdb_disable_reads_from_master — Disable reads from master

maxdb_disable_rpl_parse — Disable RPL parse

maxdb_dump_debug_info — Dump debugging information into the log

maxdb_embedded_connect — Open a connection to an embedded MaxDB server

maxdb_enable_reads_from_master — Enable reads from master

maxdb_enable_rpl_parse — Enable RPL parse

maxdb_errno — Returns the error code for the most recent function call

maxdb_error — Returns a string description of the last error

maxdb_escape_string — Alias of maxdb_real_escape_string()

maxdb_execute — Alias of maxdb_stmt_execute()

maxdb_fetch_array — Fetch a result row as an associative, a numeric array, or both

maxdb_fetch_assoc — Fetch a result row as an associative array

maxdb_fetch_field_direct — Fetch meta-data for a single field

maxdb_fetch_field — Returns the next field in the result set

maxdb_fetch_fields — Returns an array of resources representing the fields in a result set

maxdb_fetch_lengths — Returns the lengths of the columns of the current row in the result set

maxdb_fetch_object — Returns the current row of a result set as an object

maxdb_fetch_row — Get a result row as an enumerated array

maxdb_fetch — Alias of maxdb_stmt_fetch()

maxdb_field_count — Returns the number of columns for the most recent query

maxdb_field_seek — Set result pointer to a specified field offset

maxdb_field_tell — Get current field offset of a result pointer

maxdb_free_result — Frees the memory associated with a result

maxdb_get_client_info — Returns the MaxDB client version as a string

maxdb_get_client_version — Get MaxDB client info

maxdb_get_host_info — Returns a string representing the type of connection used

maxdb_get_metadata — Alias of maxdb_stmt_result_metadata()

maxdb_get_proto_info — Returns the version of the MaxDB protocol used

maxdb_get_server_info — Returns the version of the MaxDB server

maxdb_get_server_version — Returns the version of the MaxDB server as an integer

maxdb_info — Retrieves information about the most recently executed query

maxdb_init — Initializes MaxDB and returns an resource for use with maxdb_real_connect

maxdb_insert_id — Returns the auto generated id used in the last query

maxdb_kill — Disconnects from a MaxDB server

maxdb_master_query — Enforce execution of a query on the master in a master/slave setup

maxdb_more_results — Check if there any more query results from a multi query

maxdb_multi_query — Performs a query on the database

maxdb_next_result — Prepare next result from multi_query

maxdb_num_fields — Get the number of fields in a result

maxdb_num_rows — Gets the number of rows in a result

maxdb_options — Set options

maxdb_param_count — Alias of maxdb_stmt_param_count()

maxdb_ping — Pings a server connection, or tries to reconnect if the connection has gone down

maxdb_prepare — Prepare a SQL statement for execution

maxdb_query — Performs a query on the database

maxdb_real_connect — Opens a connection to a MaxDB server

maxdb_real_escape_string — Escapes special characters in a string for use in a SQL statement, taking into account the current charset of the connection

maxdb_real_query — Execute an SQL query

maxdb_report — Enables or disables internal report functions

maxdb_rollback — Rolls back current transaction

maxdb_rpl_parse_enabled — Check if RPL parse is enabled

maxdb_rpl_probe — RPL probe

maxdb_rpl_query_type — Returns RPL query type

maxdb_select_db — Selects the default database for database queries

maxdb_send_long_data — Alias of maxdb_stmt_send_long_data()

maxdb_send_query — Send the query and return

maxdb_server_end — Shut down the embedded server

maxdb_server_init — Initialize embedded server

maxdb_set_opt — Alias of maxdb_options()

maxdb_sqlstate — Returns the SQLSTATE error from previous MaxDB operation

maxdb_ssl_set — Used for establishing secure connections using SSL

maxdb_stat — Gets the current system status

maxdb_stmt_affected_rows — Returns the total number of rows changed, deleted, or inserted by the last executed statement

maxdb_stmt_bind_param — Binds variables to a prepared statement as parameters

maxdb_stmt_bind_result — Binds variables to a prepared statement for result storage

maxdb_stmt_close_long_data — Ends a sequence of maxdb_stmt_send_long_data()

maxdb_stmt_close — Closes a prepared statement

maxdb_stmt_data_seek — Seeks to an arbitray row in statement result set

maxdb_stmt_errno — Returns the error code for the most recent statement call

maxdb_stmt_error — Returns a string description for last statement error

maxdb_stmt_execute — Executes a prepared Query

maxdb_stmt_fetch — Fetch results from a prepared statement into the bound variables

maxdb_stmt_free_result — Frees stored result memory for the given statement handle

maxdb_stmt_init — Initializes a statement and returns an resource for use with maxdb_stmt_prepare

maxdb_stmt_num_rows — Return the number of rows in statements result set

maxdb_stmt_param_count — Returns the number of parameter for the given statement

maxdb_stmt_prepare — Prepare a SQL statement for execution

maxdb_stmt_reset — Resets a prepared statement

maxdb_stmt_result_metadata — Returns result set metadata from a prepared statement

maxdb_stmt_send_long_data — Send data in blocks

maxdb_stmt_sqlstate — Returns SQLSTATE error from previous statement operation

maxdb_stmt_store_result — Transfers a result set from a prepared statement

maxdb_store_result — Transfers a result set from the last query

maxdb_thread_id — Returns the thread ID for the current connection

maxdb_thread_safe — Returns whether thread safety is given or not

maxdb_use_result — Initiate a result set retrieval

maxdb_warning_count — Returns the number of warnings from the last query for the given link

LXXXIII. MCAL

mcal_append_event — Store a new event into an MCAL calendar

mcal_close — Close an MCAL stream

mcal_create_calendar — Create a new MCAL calendar

mcal_date_compare — Compares two dates

mcal_date_valid — Returns TRUE if the given year, month, day is a valid date

mcal_day_of_week — Returns the day of the week of the given date

mcal_day_of_year — Returns the day of the year of the given date

mcal_days_in_month — Returns the number of days in a month

mcal_delete_calendar — Delete an MCAL calendar

mcal_delete_event — Delete an event from an MCAL calendar

mcal_event_add_attribute — Adds an attribute and a value to the streams global event structure

mcal_event_init — Initializes a streams global event structure

mcal_event_set_alarm — Sets the alarm of the streams global event structure

mcal_event_set_category — Sets the category of the streams global event structure

mcal_event_set_class — Sets the class of the streams global event structure

mcal_event_set_description — Sets the description of the streams global event structure

mcal_event_set_end — Sets the end date and time of the streams global event structure

mcal_event_set_recur_daily — Sets the recurrence of the streams global event structure

mcal_event_set_recur_monthly_mday — Sets the recurrence of the streams global event structure

mcal_event_set_recur_monthly_wday — Sets the recurrence of the streams global event structure

mcal_event_set_recur_none — Sets the recurrence of the streams global event structure

mcal_event_set_recur_weekly — Sets the recurrence of the streams global event structure

mcal_event_set_recur_yearly — Sets the recurrence of the streams global event structure

mcal_event_set_start — Sets the start date and time of the streams global event structure

mcal_event_set_title — Sets the title of the streams global event structure

mcal_expunge — Deletes all events marked for being expunged

mcal_fetch_current_stream_event — Returns an object containing the current streams event structure

mcal_fetch_event — Fetches an event from the calendar stream

mcal_is_leap_year — Returns if the given year is a leap year or not

mcal_list_alarms — Return a list of events that has an alarm triggered at the given datetime

mcal_list_events — Return a list of IDs for a date or a range of dates

mcal_next_recurrence — Returns the next recurrence of the event

mcal_open — Opens up an MCAL connection

mcal_popen — Opens up a persistent MCAL connection

mcal_rename_calendar — Rename an MCAL calendar

mcal_reopen — Reopens an MCAL connection

mcal_snooze — Turn off an alarm for an event

mcal_store_event — Modify an existing event in an MCAL calendar

mcal_time_valid — Returns TRUE if the given hour, minutes and seconds is a valid time

mcal_week_of_year — Returns the week number of the given date

LXXXIV. mcrypt

mcrypt_cbc — Encrypt/decrypt data in CBC mode

mcrypt_cfb — Encrypt/decrypt data in CFB mode

mcrypt_create_iv — Create an initialization vector (IV) from a random source

mcrypt_decrypt — Decrypts crypttext with given parameters

mcrypt_ecb — Deprecated: Encrypt/decrypt data in ECB mode

mcrypt_enc_get_algorithms_name — Returns the name of the opened algorithm

mcrypt_enc_get_block_size — Returns the blocksize of the opened algorithm

mcrypt_enc_get_iv_size — Returns the size of the IV of the opened algorithm

mcrypt_enc_get_key_size — Returns the maximum supported keysize of the opened mode

mcrypt_enc_get_modes_name — Returns the name of the opened mode

mcrypt_enc_get_supported_key_sizes — Returns an array with the supported keysizes of the opened algorithm

mcrypt_enc_is_block_algorithm_mode — Checks whether the encryption of the opened mode works on blocks

mcrypt_enc_is_block_algorithm — Checks whether the algorithm of the opened mode is a block algorithm

mcrypt_enc_is_block_mode — Checks whether the opened mode outputs blocks

mcrypt_enc_self_test — This function runs a self test on the opened module

mcrypt_encrypt — Encrypts plaintext with given parameters

mcrypt_generic_deinit — This function deinitializes an encryption module

mcrypt_generic_end — This function terminates encryption

mcrypt_generic_init — This function initializes all buffers needed for encryption

mcrypt_generic — This function encrypts data

mcrypt_get_block_size — Get the block size of the specified cipher

mcrypt_get_cipher_name — Get the name of the specified cipher

mcrypt_get_iv_size — Returns the size of the IV belonging to a specific cipher/mode combination

mcrypt_get_key_size — Get the key size of the specified cipher

mcrypt_list_algorithms — Get an array of all supported ciphers

mcrypt_list_modes — Get an array of all supported modes

mcrypt_module_close — Close the mcrypt module

mcrypt_module_get_algo_block_size — Returns the blocksize of the specified algorithm

mcrypt_module_get_algo_key_size — Returns the maximum supported keysize of the opened mode

mcrypt_module_get_supported_key_sizes — Returns an array with the supported keysizes of the opened algorithm

mcrypt_module_is_block_algorithm_mode — Returns if the specified module is a block algorithm or not

mcrypt_module_is_block_algorithm — This function checks whether the specified algorithm is a block algorithm

mcrypt_module_is_block_mode — Returns if the specified mode outputs blocks or not

mcrypt_module_open — Opens the module of the algorithm and the mode to be used

mcrypt_module_self_test — This function runs a self test on the specified module

mcrypt_ofb — Encrypt/decrypt data in OFB mode

mdecrypt_generic — Decrypt data

LXXXV. MCVE

m_checkstatus — Check to see if a transaction has completed

m_completeauthorizations — Number of complete authorizations in queue, returning an array of their identifiers

m_connect — Establish the connection to MCVE

m_connectionerror — Get a textual representation of why a connection failed

m_deletetrans — Delete specified transaction from MCVE_CONN structure

m_destroyconn — Destroy the connection and MCVE_CONN structure

m_destroyengine — Free memory associated with IP/SSL connectivity

m_getcell — Get a specific cell from a comma delimited response by column name

m_getcellbynum — Get a specific cell from a comma delimited response by column number

m_getcommadelimited — Get the RAW comma delimited data returned from MCVE

m_getheader — Get the name of the column in a comma-delimited response

m_initconn — Create and initialize an MCVE_CONN structure

m_initengine — Ready the client for IP/SSL Communication

m_iscommadelimited — Checks to see if response is comma delimited

m_maxconntimeout — The maximum amount of time the API will attempt a connection to MCVE

m_monitor — Perform communication with MCVE (send/receive data) Non-blocking

m_numcolumns — Number of columns returned in a comma delimited response

m_numrows — Number of rows returned in a comma delimited response

m_parsecommadelimited — Parse the comma delimited response so m_getcell, etc will work

m_responsekeys — Returns array of strings which represents the keys that can be used for response parameters on this transaction

m_responseparam — Get a custom response parameter

m_returnstatus — Check to see if the transaction was successful

m_setblocking — Set blocking/non-blocking mode for connection

m_setdropfile — Set the connection method to Drop-File

m_setip — Set the connection method to IP

m_setssl_cafile — Set SSL CA (Certificate Authority) file for verification of server certificate

m_setssl_files — Set certificate key files and certificates if server requires client certificate verification

m_setssl — Set the connection method to SSL

m_settimeout — Set maximum transaction time (per trans)

m_sslcert_gen_hash — Generate hash for SSL client certificate verification

m_transactionssent — Check to see if outgoing buffer is clear

m_transinqueue — Number of transactions in client-queue

m_transkeyval — Add key/value pair to a transaction. Replaces deprecated transparam()

m_transnew — Start a new transaction

m_transsend — Finalize and send the transaction

m_uwait — Wait x microsecs

m_validateidentifier — Whether or not to validate the passed identifier on any transaction it is passed to

m_verifyconnection — Set whether or not to PING upon connect to verify connection

m_verifysslcert — Set whether or not to verify the server ssl certificate

LXXXVI. Memcache

Memcache::add — Add an item to the server

Memcache::addServer — Add a memcached server to connection pool

Memcache::close — Close memcached server connection

Memcache::connect — Open memcached server connection

memcache_debug — Turn debug output on/off

Memcache::decrement — Decrement item's value

Memcache::delete — Delete item from the server

Memcache::flush — Flush all existing items at the server

Memcache::get — Retrieve item from the server

Memcache::getExtendedStats — Get statistics from all servers in pool

Memcache::getServerStatus — Returns server status

Memcache::getStats — Get statistics of the server

Memcache::getVersion — Return version of the server

Memcache::increment — Increment item's value

Memcache::pconnect — Open memcached server persistent connection

Memcache::replace — Replace value of the existing item

Memcache::set — Store data at the server

Memcache::setCompressThreshold — Enable automatic compression of large values

Memcache::setServerParams — Changes server parameters and status at runtime

LXXXVII. mhash

mhash_count — Get the highest available hash id

mhash_get_block_size — Get the block size of the specified hash

mhash_get_hash_name — Get the name of the specified hash

mhash_keygen_s2k — Generates a key

mhash — Compute hash

LXXXVIII. Mimetype

mime_content_type — Detect MIME Content-type for a file (deprecated)

LXXXIX. Ming (flash)

SWFAction — SWFAction Class

SWFAction->__construct() — Creates a new SWFAction

SWFBitmap — SWFBitmap Class

SWFBitmap->__construct() — Loads Bitmap object

SWFBitmap->getHeight() — Returns the bitmap's height

SWFBitmap->getWidth() — Returns the bitmap's width

SWFButton — SWFButton Class

SWFButton->__construct() — Creates a new Button

SWFButton->addAction() — Adds an action

SWFButton->addASound() — Associates a sound with a button transition

SWFButton->addShape() — Adds a shape to a button

SWFButton->setAction() — Sets the action

SWFButton->setDown() — Alias for addShape(shape, SWFBUTTON_DOWN)

SWFButton->setHit() — Alias for addShape(shape, SWFBUTTON_HIT)

SWFButton->setMenu() — enable track as menu button behaviour

SWFButton->setOver() — Alias for addShape(shape, SWFBUTTON_OVER)

SWFButton->setUp() — Alias for addShape(shape, SWFBUTTON_UP)

SWFDisplayItem — SWFDisplayItem Class

SWFDisplayItem->addAction() — Adds this SWFAction to the given SWFSprite instance

SWFDisplayItem->addColor() — Adds the given color to this item's color transform

SWFDisplayItem->endMask() — Another way of defining a MASK layer

SWFDisplayItem->getRot()

SWFDisplayItem->getX()

SWFDisplayItem->getXScale()

SWFDisplayItem->getXSkew()

SWFDisplayItem->getY()

SWFDisplayItem->getYScale()

SWFDisplayItem->getYSkew()

SWFDisplayItem->move() — Moves object in relative coordinates

SWFDisplayItem->moveTo() — Moves object in global coordinates

SWFDisplayItem->multColor() — Multiplies the item's color transform

SWFDisplayItem->remove() — Removes the object from the movie

SWFDisplayItem->rotate() — Rotates in relative coordinates

SWFDisplayItem->rotateTo() — Rotates the object in global coordinates

SWFDisplayItem->scale() — Scales the object in relative coordinates

SWFDisplayItem->scaleTo() — Scales the object in global coordinates

SWFDisplayItem->setDepth() — Sets z-order

SWFDisplayItem->setMaskLevel() — Defines a MASK layer at level

SWFDisplayItem->setMatrix() — Sets the item's transform matrix

SWFDisplayItem->setName() — Sets the object's name

SWFDisplayItem->setRatio() — Sets the object's ratio

SWFDisplayItem->skewX() — Sets the X-skew

SWFDisplayItem->skewXTo() — Sets the X-skew

SWFDisplayItem->skewY() — Sets the Y-skew

SWFDisplayItem->skewYTo() — Sets the Y-skew

SWFFill — SWFFill Class

SWFFill->moveTo() — Moves fill origin

SWFFill->rotateTo() — Sets fill's rotation

SWFFill->scaleTo() — Sets fill's scale

SWFFill->skewXTo() — Sets fill x-skew

SWFFill->skewYTo() — Sets fill y-skew

SWFFont — SWFFont Class

SWFFont->__construct() — Loads a font definition

SWFFont->getAscent() — Returns the ascent of the font, or 0 if not available

SWFFont->getDescent() — Returns the descent of the font, or 0 if not available

SWFFont->getLeading() — Returns the leading of the font, or 0 if not available

SWFFont->getShape() — Returns the glyph shape of a char as a text string

SWFFont->getUTF8Width() — Calculates the width of the given string in this font at full height

SWFFont->getWidth() — Returns the string's width

SWFFontChar — SWFFontChar Class

SWFFontChar->addChars() — Adds characters to a font for exporting font

SWFFontChar->addUTF8Chars() — Adds characters to a font for exporting font

SWFGradient — SWFGradient Class

SWFGradient->__construct() — Creates a gradient object

SWFGradient->addEntry() — Adds an entry to the gradient list

SWFMorph — SWFMorph Class

SWFMorph->__construct() — Creates a new SWFMorph object

SWFMorph->getShape1() — Gets a handle to the starting shape

SWFMorph->getShape2() — Gets a handle to the ending shape

SWFMovie — SWFMovie Class

SWFMovie->__construct() — Creates a new movie object, representing an SWF version 4 movie

SWFMovie->add() — Adds any type of data to a movie

SWFMovie->addExport()

SWFMovie->addFont()

SWFMovie->importChar()

SWFMovie->importFont()

SWFMovie->labelFrame() — Labels a frame

SWFMovie->nextFrame() — Moves to the next frame of the animation

SWFMovie->output() — Dumps your lovingly prepared movie out

SWFMovie->remove() — Removes the object instance from the display list

SWFMovie->save() — Saves the SWF movie in a file

SWFMovie->saveToFile()

SWFMovie->setbackground() — Sets the background color

SWFMovie->setDimension() — Sets the movie's width and height

SWFMovie->setFrames() — Sets the total number of frames in the animation

SWFMovie->setRate() — Sets the animation's frame rate

SWFMovie->startSound()

SWFMovie->stopSound()

SWFMovie->streamMP3() — Streams a MP3 file

SWFMovie->writeExports()

SWFPrebuiltClip — SWFPrebuiltClip Class

SWFPrebuiltClip->__construct() — Returns a SWFPrebuiltClip object

SWFShape — SWFShape Class

SWFShape->__construct() — Creates a new shape object

SWFShape->addFill() — Adds a solid fill to the shape

SWFShape->drawArc() — Draws an arc of radius r centered at the current location, from angle startAngle to angle endAngle measured clockwise from 12 o'clock

SWFShape->drawCircle() — Draws a circle of radius r centered at the current location, in a counter-clockwise fashion

SWFShape->drawCubic() — Draws a cubic bezier curve using the current position and the three given points as control points

SWFShape->drawCubicTo() — Draws a cubic bezier curve using the current position and the three given points as control points

SWFShape->drawCurve() — Draws a curve (relative)

SWFShape->drawCurveTo() — Draws a curve

SWFShape->drawGlyph() — Draws the first character in the given string into the shape using the glyph definition from the given font

SWFShape->drawLine() — Draws a line (relative)

SWFShape->drawLineTo() — Draws a line

SWFShape->movePen() — Moves the shape's pen (relative)

SWFShape->movePenTo() — Moves the shape's pen

SWFShape->setLeftFill() — Sets left rasterizing color

SWFShape->setLine() — Sets the shape's line style

SWFShape->setRightFill() — Sets right rasterizing color

SWFSound — SWFSound Class

SWFSound — Returns a new SWFSound object from given file

SWFSoundInstance — SWFSoundInstance Class

SWFSoundInstance->loopCount()

SWFSoundInstance->loopInPoint()

SWFSoundInstance->loopOutPoint()

SWFSoundInstance->noMultiple()

SWFSprite — SWFSprite Class

SWFSprite->__construct() — Creates a movie clip (a sprite)

SWFSprite->add() — Adds an object to a sprite

SWFSprite->labelFrame() — Labels frame

SWFSprite->nextFrame() — Moves to the next frame of the animation

SWFSprite->remove() — Removes an object to a sprite

SWFSprite->setFrames() — Sets the total number of frames in the animation

SWFSprite->startSound()

SWFSprite->stopSound()

SWFText — SWFText Class

SWFText->__construct() — Creates a new SWFText object

SWFText->addString() — Draws a string

SWFText->addUTF8String() — Writes the given text into this SWFText object at the current pen position, using the current font, height, spacing, and color

SWFText->getAscent() — Returns the ascent of the current font at its current size, or 0 if not available

SWFText->getDescent() — Returns the descent of the current font at its current size, or 0 if not available

SWFText->getLeading() — Returns the leading of the current font at its current size, or 0 if not available

SWFText->getUTF8Width() — calculates the width of the given string in this text objects current font and size

SWFText->getWidth() — Computes string's width

SWFText->moveTo() — Moves the pen

SWFText->setColor() — Sets the current text color

SWFText->setFont() — Sets the current font

SWFText->setHeight() — Sets the current font height

SWFText->setSpacing() — Sets the current font spacing

SWFTextField — SWFTextField Class

SWFTextField->__construct() — Creates a text field object

SWFTextField->addChars() — adds characters to a font that will be available within a textfield

SWFTextField->addString() — Concatenates the given string to the text field

SWFTextField->align() — Sets the text field alignment

SWFTextField->setBounds() — Sets the text field width and height

SWFTextField->setColor() — Sets the color of the text field

SWFTextField->setFont() — Sets the text field font

SWFTextField->setHeight() — Sets the font height of this text field font

SWFTextField->setIndentation() — Sets the indentation of the first line

SWFTextField->setLeftMargin() — Sets the left margin width of the text field

SWFTextField->setLineSpacing() — Sets the line spacing of the text field

SWFTextField->setMargins() — Sets the margins width of the text field

SWFTextField->setName() — Sets the variable name

SWFTextField->setPadding() — Sets the padding of this textfield

SWFTextField->setRightMargin() — Sets the right margin width of the text field

SWFVideoStream — SWFVideoStream Class

SWFVideoStream->__construct() — Returns a SWFVideoStream object

SWFVideoStream->getNumFrames()

SWFVideoStream->setDimension()

ming_keypress — Returns the action flag for keyPress(char)

ming_setcubicthreshold — Set cubic threshold

ming_setscale — Set scale

ming_setswfcompression — Sets the SWF output compression

ming_useconstants — Use constant pool

ming_useswfversion — Sets the SWF version

XC. Misc.

connection_aborted — Check whether client disconnected

connection_status — Returns connection status bitfield

connection_timeout — Check if the script timed out

constant — Returns the value of a constant

define — Defines a named constant

defined — Checks whether a given named constant exists

die — Equivalent to exit()

eval — Evaluate a string as PHP code

exit — Output a message and terminate the current script

get_browser — Tells what the user's browser is capable of

__halt_compiler — Halts the compiler execution

highlight_file — Syntax highlighting of a file

highlight_string — Syntax highlighting of a string

ignore_user_abort — Set whether a client disconnect should abort script execution

pack — Pack data into binary string

php_check_syntax — Check the PHP syntax of (and execute) the specified file

php_strip_whitespace — Return source with stripped comments and whitespace

show_source — Alias of highlight_file()

sleep — Delay execution

sys_getloadavg — Gets system load average

time_nanosleep — Delay for a number of seconds and nanoseconds

time_sleep_until — Make the script sleep until the specified time

uniqid — Generate a unique ID

unpack — Unpack data from binary string

usleep — Delay execution in microseconds

XCI. mnoGoSearch

udm_add_search_limit — Add various search limits

udm_alloc_agent_array — Allocate mnoGoSearch session

udm_alloc_agent — Allocate mnoGoSearch session

udm_api_version — Get mnoGoSearch API version

udm_cat_list — Get all the categories on the same level with the current one

udm_cat_path — Get the path to the current category

udm_check_charset — Check if the given charset is known to mnogosearch

udm_check_stored — Check connection to stored

udm_clear_search_limits — Clear all mnoGoSearch search restrictions

udm_close_stored — Close connection to stored

udm_crc32 — Return CRC32 checksum of given string

udm_errno — Get mnoGoSearch error number

udm_error — Get mnoGoSearch error message

udm_find — Perform search

udm_free_agent — Free mnoGoSearch session

udm_free_ispell_data — Free memory allocated for ispell data

udm_free_res — Free mnoGoSearch result

udm_get_doc_count — Get total number of documents in database

udm_get_res_field — Fetch a result field

udm_get_res_param — Get mnoGoSearch result parameters

udm_hash32 — Return Hash32 checksum of gived string

udm_load_ispell_data — Load ispell data

udm_open_stored — Open connection to stored

udm_set_agent_param — Set mnoGoSearch agent session parameters

XCII. MS SQL Server

mssql_bind — Adds a parameter to a stored procedure or a remote stored procedure

mssql_close — Close MS SQL Server connection

mssql_connect — Open MS SQL server connection

mssql_data_seek — Moves internal row pointer

mssql_execute — Executes a stored procedure on a MS SQL server database

mssql_fetch_array — Fetch a result row as an associative array, a numeric array, or both

mssql_fetch_assoc — Returns an associative array of the current row in the result

mssql_fetch_batch — Returns the next batch of records

mssql_fetch_field — Get field information

mssql_fetch_object — Fetch row as object

mssql_fetch_row — Get row as enumerated array

mssql_field_length — Get the length of a field

mssql_field_name — Get the name of a field

mssql_field_seek — Seeks to the specified field offset

mssql_field_type — Gets the type of a field

mssql_free_result — Free result memory

mssql_free_statement — Free statement memory

mssql_get_last_message — Returns the last message from the server

mssql_guid_string — Converts a 16 byte binary GUID to a string

mssql_init — Initializes a stored procedure or a remote stored procedure

mssql_min_error_severity — Sets the lower error severity

mssql_min_message_severity — Sets the lower message severity

mssql_next_result — Move the internal result pointer to the next result

mssql_num_fields — Gets the number of fields in result

mssql_num_rows — Gets the number of rows in result

mssql_pconnect — Open persistent MS SQL connection

mssql_query — Send MS SQL query

mssql_result — Get result data

mssql_rows_affected — Returns the number of records affected by the query

mssql_select_db — Select MS SQL database

XCIII. MS SQL Server (PDO)

PDO_DBLIB DSN — Connecting to Microsoft SQL Server and Sybase databases

XCIV. Msession

msession_connect — Connect to msession server

msession_count — Get session count

msession_create — Create a session

msession_destroy — Destroy a session

msession_disconnect — Close connection to msession server

msession_find — Find all sessions with name and value

msession_get_array — Get array of msession variables

msession_get_data — Get data session unstructured data

msession_get — Get value from session

msession_inc — Increment value in session

msession_list — List all sessions

msession_listvar — List sessions with variable

msession_lock — Lock a session

msession_plugin — Call an escape function within the msession personality plugin

msession_randstr — Get random string

msession_set_array — Set msession variables from an array

msession_set_data — Set data session unstructured data

msession_set — Set value in session

msession_timeout — Set/get session timeout

msession_uniq — Get unique id

msession_unlock — Unlock a session

XCV. mSQL

msql_affected_rows — Returns number of affected rows

msql_close — Close mSQL connection

msql_connect — Open mSQL connection

msql_create_db — Create mSQL database

msql_createdb — Alias of msql_create_db()

msql_data_seek — Move internal row pointer

msql_db_query — Send mSQL query

msql_dbname — Alias of msql_result()

msql_drop_db — Drop (delete) mSQL database

msql_error — Returns error message of last msql call

msql_fetch_array — Fetch row as array

msql_fetch_field — Get field information

msql_fetch_object — Fetch row as object

msql_fetch_row — Get row as enumerated array

msql_field_flags — Get field flags

msql_field_len — Get field length

msql_field_name — Get the name of the specified field in a result

msql_field_seek — Set field offset

msql_field_table — Get table name for field

msql_field_type — Get field type

msql_fieldflags — Alias of msql_field_flags()

msql_fieldlen — Alias of msql_field_len()

msql_fieldname — Alias of msql_field_name()

msql_fieldtable — Alias of msql_field_table()

msql_fieldtype — Alias of msql_field_type()

msql_free_result — Free result memory

msql_list_dbs — List mSQL databases on server

msql_list_fields — List result fields

msql_list_tables — List tables in an mSQL database

msql_num_fields — Get number of fields in result

msql_num_rows — Get number of rows in result

msql_numfields — Alias of msql_num_fields()

msql_numrows — Alias of msql_num_rows()

msql_pconnect — Open persistent mSQL connection

msql_query — Send mSQL query

msql_regcase — Alias of sql_regcase()

msql_result — Get result data

msql_select_db — Select mSQL database

msql_tablename — Alias of msql_result()

msql — Alias of msql_db_query()

XCVI. Multibyte String

mb_check_encoding — Check if the string is valid for the specified encoding

mb_convert_case — Perform case folding on a string

mb_convert_encoding — Convert character encoding

mb_convert_kana — Convert "kana" one from another ("zen-kaku", "han-kaku" and more)

mb_convert_variables — Convert character code in variable(s)

mb_decode_mimeheader — Decode string in MIME header field

mb_decode_numericentity — Decode HTML numeric string reference to character

mb_detect_encoding — Detect character encoding

mb_detect_order — Set/Get character encoding detection order

mb_encode_mimeheader — Encode string for MIME header

mb_encode_numericentity — Encode character to HTML numeric string reference

mb_ereg_match — Regular expression match for multibyte string

mb_ereg_replace — Replace regular expression with multibyte support

mb_ereg_search_getpos — Returns start point for next regular expression match

mb_ereg_search_getregs — Retrieve the result from the last multibyte regular expression match

mb_ereg_search_init — Setup string and regular expression for multibyte regularexpression match

mb_ereg_search_pos — Return position and length of matched part of multibyte regular expression for predefined multibyte string

mb_ereg_search_regs — Returns the matched part of multibyte regular expression

mb_ereg_search_setpos — Set start point of next regular expression match

mb_ereg_search — Multibyte regular expression match for predefined multibyte string

mb_ereg — Regular expression match with multibyte support

mb_eregi_replace — Replace regular expression with multibyte support ignoring case

mb_eregi — Regular expression match ignoring case with multibyte support

mb_get_info — Get internal settings of mbstring

mb_http_input — Detect HTTP input character encoding

mb_http_output — Set/Get HTTP output character encoding

mb_internal_encoding — Set/Get internal character encoding

mb_language — Set/Get current language

mb_output_handler — Callback function converts character encoding in output buffer

mb_parse_str — Parse GET/POST/COOKIE data and set global variable

mb_preferred_mime_name — Get MIME charset string

mb_regex_encoding — Returns current encoding for multibyte regex as string

mb_regex_set_options — Set/Get the default options for mbregex functions

mb_send_mail — Send encoded mail

mb_split — Split multibyte string using regular expression

mb_strcut — Get part of string

mb_strimwidth — Get truncated string with specified width

mb_stripos — Finds position of first occurrence of a string within another, case insensitive

mb_stristr — Finds first occurrence of a string within another, case insensitive

mb_strlen — Get string length

mb_strpos — Find position of first occurrence of string in a string

mb_strrchr — Finds the last occurrence of a character in a string within another

mb_strrichr — Finds the last occurrence of a character in a string within another, case insensitive

mb_strripos — Finds position of last occurrence of a string within another, case insensitive

mb_strrpos — Find position of last occurrence of a string in a string

mb_strstr — Finds first occurrence of a string within another

mb_strtolower — Make a string lowercase

mb_strtoupper — Make a string uppercase

mb_strwidth — Return width of string

mb_substitute_character — Set/Get substitution character

mb_substr_count — Count the number of substring occurrences

mb_substr — Get part of string

XCVII. muscat

muscat_close — Shuts down the muscat session

muscat_get — Gets a line back from the core muscat API

muscat_give — Sends string to the core muscat API

muscat_setup_net — Creates a new muscat session

muscat_setup — Creates a new local muscat session

XCVIII. MySQL

mysql_affected_rows — Get number of affected rows in previous MySQL operation

mysql_change_user — Change logged in user of the active connection

mysql_client_encoding — Returns the name of the character set

mysql_close — Close MySQL connection

mysql_connect — Open a connection to a MySQL Server

mysql_create_db — Create a MySQL database

mysql_data_seek — Move internal result pointer

mysql_db_name — Get result data

mysql_db_query — Send a MySQL query

mysql_drop_db — Drop (delete) a MySQL database

mysql_errno — Returns the numerical value of the error message from previous MySQL operation

mysql_error — Returns the text of the error message from previous MySQL operation

mysql_escape_string — Escapes a string for use in a mysql_query

mysql_fetch_array — Fetch a result row as an associative array, a numeric array, or both

mysql_fetch_assoc — Fetch a result row as an associative array

mysql_fetch_field — Get column information from a result and return as an object

mysql_fetch_lengths — Get the length of each output in a result

mysql_fetch_object — Fetch a result row as an object

mysql_fetch_row — Get a result row as an enumerated array

mysql_field_flags — Get the flags associated with the specified field in a result

mysql_field_len — Returns the length of the specified field

mysql_field_name — Get the name of the specified field in a result

mysql_field_seek — Set result pointer to a specified field offset

mysql_field_table — Get name of the table the specified field is in

mysql_field_type — Get the type of the specified field in a result

mysql_free_result — Free result memory

mysql_get_client_info — Get MySQL client info

mysql_get_host_info — Get MySQL host info

mysql_get_proto_info — Get MySQL protocol info

mysql_get_server_info — Get MySQL server info

mysql_info — Get information about the most recent query

mysql_insert_id — Get the ID generated from the previous INSERT operation

mysql_list_dbs — List databases available on a MySQL server

mysql_list_fields — List MySQL table fields

mysql_list_processes — List MySQL processes

mysql_list_tables — List tables in a MySQL database

mysql_num_fields — Get number of fields in result

mysql_num_rows — Get number of rows in result

mysql_pconnect — Open a persistent connection to a MySQL server

mysql_ping — Ping a server connection or reconnect if there is no connection

mysql_query — Send a MySQL query

mysql_real_escape_string — Escapes special characters in a string for use in a SQL statement

mysql_result — Get result data

mysql_select_db — Select a MySQL database

mysql_set_charset — Sets the client character set

mysql_stat — Get current system status

mysql_tablename — Get table name of field

mysql_thread_id — Return the current thread ID

mysql_unbuffered_query — Send an SQL query to MySQL, without fetching and buffering the result rows

XCIX. MySQL (PDO)

PDO_MYSQL DSN — Connecting to MySQL databases

C. mysqli

mysqli_affected_rows — Gets the number of affected rows in a previous MySQL operation

mysqli_autocommit — Turns on or off auto-commiting database modifications

mysqli_bind_param — Alias for mysqli_stmt_bind_param()

mysqli_bind_result — Alias for mysqli_stmt_bind_result()

mysqli_change_user — Changes the user of the specified database connection

mysqli_character_set_name — Returns the default character set for the database connection

mysqli_client_encoding — Alias of mysqli_character_set_name()

mysqli_close — Closes a previously opened database connection

mysqli_commit — Commits the current transaction

mysqli_connect_errno — Returns the error code from last connect call

mysqli_connect_error — Returns a string description of the last connect error

mysqli_connect — Open a new connection to the MySQL server

mysqli_data_seek — Adjusts the result pointer to an arbitary row in the result

mysqli_debug — Performs debugging operations

mysqli_disable_reads_from_master — Disable reads from master

mysqli_disable_rpl_parse — Disable RPL parse

mysqli_dump_debug_info — Dump debugging information into the log

mysqli_embedded_server_end

mysqli_embedded_server_start

mysqli_enable_reads_from_master — Enable reads from master

mysqli_enable_rpl_parse — Enable RPL parse

mysqli_errno — Returns the error code for the most recent function call

mysqli_error — Returns a string description of the last error

mysqli_escape_string — Alias of mysqli_real_escape_string()

mysqli_execute — Alias for mysqli_stmt_execute()

mysqli_fetch_array — Fetch a result row as an associative, a numeric array, or both

mysqli_fetch_assoc — Fetch a result row as an associative array

mysqli_fetch_field_direct — Fetch meta-data for a single field

mysqli_fetch_field — Returns the next field in the result set

mysqli_fetch_fields — Returns an array of objects representing the fields in a result set

mysqli_fetch_lengths — Returns the lengths of the columns of the current row in the result set

mysqli_fetch_object — Returns the current row of a result set as an object

mysqli_fetch_row — Get a result row as an enumerated array

mysqli_fetch — Alias for mysqli_stmt_fetch()

mysqli_field_count — Returns the number of columns for the most recent query

mysqli_field_seek — Set result pointer to a specified field offset

mysqli_field_tell — Get current field offset of a result pointer

mysqli_free_result — Frees the memory associated with a result

mysqli_get_charset — Returns a character set object

mysqli_get_client_info — Returns the MySQL client version as a string

mysqli_get_client_version — Get MySQL client info

mysqli_get_host_info — Returns a string representing the type of connection used

mysqli_get_metadata — Alias for mysqli_stmt_result_metadata()

mysqli_get_proto_info — Returns the version of the MySQL protocol used

mysqli_get_server_info — Returns the version of the MySQL server

mysqli_get_server_version — Returns the version of the MySQL server as an integer

mysqli_get_warnings

mysqli_info — Retrieves information about the most recently executed query

mysqli_init — Initializes MySQLi and returns a resource for use with mysqli_real_connect()

mysqli_insert_id — Returns the auto generated id used in the last query

mysqli_kill — Asks the server to kill a MySQL thread

mysqli_master_query — Enforce execution of a query on the master in a master/slave setup

mysqli_more_results — Check if there are any more query results from a multi query

mysqli_multi_query — Performs a query on the database

mysqli_next_result — Prepare next result from multi_query

mysqli_num_fields — Get the number of fields in a result

mysqli_num_rows — Gets the number of rows in a result

mysqli_options — Set options

mysqli_param_count — Alias for mysqli_stmt_param_count()

mysqli_ping — Pings a server connection, or tries to reconnect if the connection has gone down

mysqli_prepare — Prepare a SQL statement for execution

mysqli_query — Performs a query on the database

mysqli_real_connect — Opens a connection to a mysql server

mysqli_real_escape_string — Escapes special characters in a string for use in a SQL statement, taking into account the current charset of the connection

mysqli_real_query — Execute an SQL query

mysqli_report — Enables or disables internal report functions

mysqli_rollback — Rolls back current transaction

mysqli_rpl_parse_enabled — Check if RPL parse is enabled

mysqli_rpl_probe — RPL probe

mysqli_rpl_query_type — Returns RPL query type

mysqli_select_db — Selects the default database for database queries

mysqli_send_long_data — Alias for mysqli_stmt_send_long_data()

mysqli_send_query — Send the query and return

mysqli_server_end — Shut down the embedded server

mysqli_server_init — Initialize embedded server

mysqli_set_charset — Sets the default client character set

mysqli_set_local_infile_default — Unsets user defined handler for load local infile command

mysqli_set_local_infile_handler — Set callback functions for LOAD DATA LOCAL INFILE command

mysqli_set_opt — Alias of mysqli_options()

mysqli_slave_query — Force execution of a query on a slave in a master/slave setup

mysqli_sqlstate — Returns the SQLSTATE error from previous MySQL operation

mysqli_ssl_set — Used for establishing secure connections using SSL

mysqli_stat — Gets the current system status

mysqli_stmt_affected_rows — Returns the total number of rows changed, deleted, or inserted by the last executed statement

mysqli_stmt_attr_get

mysqli_stmt_attr_set

mysqli_stmt_bind_param — Binds variables to a prepared statement as parameters

mysqli_stmt_bind_result — Binds variables to a prepared statement for result storage

mysqli_stmt_close — Closes a prepared statement

mysqli_stmt_data_seek — Seeks to an arbitray row in statement result set

mysqli_stmt_errno — Returns the error code for the most recent statement call

mysqli_stmt_error — Returns a string description for last statement error

mysqli_stmt_execute — Executes a prepared Query

mysqli_stmt_fetch — Fetch results from a prepared statement into the bound variables

mysqli_stmt_field_count — Returns the number of field in the given statement

mysqli_stmt_free_result — Frees stored result memory for the given statement handle

mysqli_stmt_get_warnings

mysqli_stmt_init — Initializes a statement and returns an object for use with mysqli_stmt_prepare

mysqli_stmt_insert_id — Get the ID generated from the previous INSERT operation

mysqli_stmt_num_rows — Return the number of rows in statements result set

mysqli_stmt_param_count — Returns the number of parameter for the given statement

mysqli_stmt_prepare — Prepare a SQL statement for execution

mysqli_stmt_reset — Resets a prepared statement

mysqli_stmt_result_metadata — Returns result set metadata from a prepared statement

mysqli_stmt_send_long_data — Send data in blocks

mysqli_stmt_sqlstate — Returns SQLSTATE error from previous statement operation

mysqli_stmt_store_result — Transfers a result set from a prepared statement

mysqli_store_result — Transfers a result set from the last query

mysqli_thread_id — Returns the thread ID for the current connection

mysqli_thread_safe — Returns whether thread safety is given or not

mysqli_use_result — Initiate a result set retrieval

mysqli_warning_count — Returns the number of warnings from the last query for the given link

CI. Ncurses

ncurses_addch — Add character at current position and advance cursor

ncurses_addchnstr — Add attributed string with specified length at current position

ncurses_addchstr — Add attributed string at current position

ncurses_addnstr — Add string with specified length at current position

ncurses_addstr — Output text at current position

ncurses_assume_default_colors — Define default colors for color 0

ncurses_attroff — Turn off the given attributes

ncurses_attron — Turn on the given attributes

ncurses_attrset — Set given attributes

ncurses_baudrate — Returns baudrate of terminal

ncurses_beep — Let the terminal beep

ncurses_bkgd — Set background property for terminal screen

ncurses_bkgdset — Control screen background

ncurses_border — Draw a border around the screen using attributed characters

ncurses_bottom_panel — Moves a visible panel to the bottom of the stack

ncurses_can_change_color — Check if we can change terminals colors

ncurses_cbreak — Switch of input buffering

ncurses_clear — Clear screen

ncurses_clrtobot — Clear screen from current position to bottom

ncurses_clrtoeol — Clear screen from current position to end of line

ncurses_color_content — Gets the RGB value for color

ncurses_color_set — Set fore- and background color

ncurses_curs_set — Set cursor state

ncurses_def_prog_mode — Saves terminals (program) mode

ncurses_def_shell_mode — Saves terminals (shell) mode

ncurses_define_key — Define a keycode

ncurses_del_panel — Remove panel from the stack and delete it (but not the associated window)

ncurses_delay_output — Delay output on terminal using padding characters

ncurses_delch — Delete character at current position, move rest of line left

ncurses_deleteln — Delete line at current position, move rest of screen up

ncurses_delwin — Delete a ncurses window

ncurses_doupdate — Write all prepared refreshes to terminal

ncurses_echo — Activate keyboard input echo

ncurses_echochar — Single character output including refresh

ncurses_end — Stop using ncurses, clean up the screen

ncurses_erase — Erase terminal screen

ncurses_erasechar — Returns current erase character

ncurses_filter — Set LINES for iniscr() and newterm() to 1

ncurses_flash — Flash terminal screen (visual bell)

ncurses_flushinp — Flush keyboard input buffer

ncurses_getch — Read a character from keyboard

ncurses_getmaxyx — Returns the size of a window

ncurses_getmouse — Reads mouse event

ncurses_getyx — Returns the current cursor position for a window

ncurses_halfdelay — Put terminal into halfdelay mode

ncurses_has_colors — Check if terminal has colors

ncurses_has_ic — Check for insert- and delete-capabilities

ncurses_has_il — Check for line insert- and delete-capabilities

ncurses_has_key — Check for presence of a function key on terminal keyboard

ncurses_hide_panel — Remove panel from the stack, making it invisible

ncurses_hline — Draw a horizontal line at current position using an attributed character and max. n characters long

ncurses_inch — Get character and attribute at current position

ncurses_init_color — Set new RGB value for color

ncurses_init_pair — Allocate a color pair

ncurses_init — Initialize ncurses

ncurses_insch — Insert character moving rest of line including character at current position

ncurses_insdelln — Insert lines before current line scrolling down (negative numbers delete and scroll up)

ncurses_insertln — Insert a line, move rest of screen down

ncurses_insstr — Insert string at current position, moving rest of line right

ncurses_instr — Reads string from terminal screen

ncurses_isendwin — Ncurses is in endwin mode, normal screen output may be performed

ncurses_keyok — Enable or disable a keycode

ncurses_keypad — Turns keypad on or off

ncurses_killchar — Returns current line kill character

ncurses_longname — Returns terminals description

ncurses_meta — Enables/Disable 8-bit meta key information

ncurses_mouse_trafo — Transforms coordinates

ncurses_mouseinterval — Set timeout for mouse button clicks

ncurses_mousemask — Sets mouse options

ncurses_move_panel — Moves a panel so that its upper-left corner is at [startx, starty]

ncurses_move — Move output position

ncurses_mvaddch — Move current position and add character

ncurses_mvaddchnstr — Move position and add attributed string with specified length

ncurses_mvaddchstr — Move position and add attributed string

ncurses_mvaddnstr — Move position and add string with specified length

ncurses_mvaddstr — Move position and add string

ncurses_mvcur — Move cursor immediately

ncurses_mvdelch — Move position and delete character, shift rest of line left

ncurses_mvgetch — Move position and get character at new position

ncurses_mvhline — Set new position and draw a horizontal line using an attributed character and max. n characters long

ncurses_mvinch — Move position and get attributed character at new position

ncurses_mvvline — Set new position and draw a vertical line using an attributed character and max. n characters long

ncurses_mvwaddstr — Add string at new position in window

ncurses_napms — Sleep

ncurses_new_panel — Create a new panel and associate it with window

ncurses_newpad — Creates a new pad (window)

ncurses_newwin — Create a new window

ncurses_nl — Translate newline and carriage return / line feed

ncurses_nocbreak — Switch terminal to cooked mode

ncurses_noecho — Switch off keyboard input echo

ncurses_nonl — Do not translate newline and carriage return / line feed

ncurses_noqiflush — Do not flush on signal characters

ncurses_noraw — Switch terminal out of raw mode

ncurses_pair_content — Gets the RGB value for color

ncurses_panel_above — Returns the panel above panel

ncurses_panel_below — Returns the panel below panel

ncurses_panel_window — Returns the window associated with panel

ncurses_pnoutrefresh — Copies a region from a pad into the virtual screen

ncurses_prefresh — Copies a region from a pad into the virtual screen

ncurses_putp — Apply padding information to the string and output it

ncurses_qiflush — Flush on signal characters

ncurses_raw — Switch terminal into raw mode

ncurses_refresh — Refresh screen

ncurses_replace_panel — Replaces the window associated with panel

ncurses_reset_prog_mode — Resets the prog mode saved by def_prog_mode

ncurses_reset_shell_mode — Resets the shell mode saved by def_shell_mode

ncurses_resetty — Restores saved terminal state

ncurses_savetty — Saves terminal state

ncurses_scr_dump — Dump screen content to file

ncurses_scr_init — Initialize screen from file dump

ncurses_scr_restore — Restore screen from file dump

ncurses_scr_set — Inherit screen from file dump

ncurses_scrl — Scroll window content up or down without changing current position

ncurses_show_panel — Places an invisible panel on top of the stack, making it visible

ncurses_slk_attr — Returns current soft label key attribute

ncurses_slk_attroff — Turn off the given attributes for soft function-key labels

ncurses_slk_attron — Turn on the given attributes for soft function-key labels

ncurses_slk_attrset — Set given attributes for soft function-key labels

ncurses_slk_clear — Clears soft labels from screen

ncurses_slk_color — Sets color for soft label keys

ncurses_slk_init — Initializes soft label key functions

ncurses_slk_noutrefresh — Copies soft label keys to virtual screen

ncurses_slk_refresh — Copies soft label keys to screen

ncurses_slk_restore — Restores soft label keys

ncurses_slk_set — Sets function key labels

ncurses_slk_touch — Forces output when ncurses_slk_noutrefresh is performed

ncurses_standend — Stop using 'standout' attribute

ncurses_standout — Start using 'standout' attribute

ncurses_start_color — Start using colors

ncurses_termattrs — Returns a logical OR of all attribute flags supported by terminal

ncurses_termname — Returns terminals (short)-name

ncurses_timeout — Set timeout for special key sequences

ncurses_top_panel — Moves a visible panel to the top of the stack

ncurses_typeahead — Specify different filedescriptor for typeahead checking

ncurses_ungetch — Put a character back into the input stream

ncurses_ungetmouse — Pushes mouse event to queue

ncurses_update_panels — Refreshes the virtual screen to reflect the relations between panels in the stack

ncurses_use_default_colors — Assign terminal default colors to color id -1

ncurses_use_env — Control use of environment information about terminal size

ncurses_use_extended_names — Control use of extended names in terminfo descriptions

ncurses_vidattr — Display the string on the terminal in the video attribute mode

ncurses_vline — Draw a vertical line at current position using an attributed character and max. n characters long

ncurses_waddch — Adds character at current position in a window and advance cursor

ncurses_waddstr — Outputs text at current postion in window

ncurses_wattroff — Turns off attributes for a window

ncurses_wattron — Turns on attributes for a window

ncurses_wattrset — Set the attributes for a window

ncurses_wborder — Draws a border around the window using attributed characters

ncurses_wclear — Clears window

ncurses_wcolor_set — Sets windows color pairings

ncurses_werase — Erase window contents

ncurses_wgetch — Reads a character from keyboard (window)

ncurses_whline — Draws a horizontal line in a window at current position using an attributed character and max. n characters long

ncurses_wmouse_trafo — Transforms window/stdscr coordinates

ncurses_wmove — Moves windows output position

ncurses_wnoutrefresh — Copies window to virtual screen

ncurses_wrefresh — Refresh window on terminal screen

ncurses_wstandend — End standout mode for a window

ncurses_wstandout — Enter standout mode for a window

ncurses_wvline — Draws a vertical line in a window at current position using an attributed character and max. n characters long

CII. Network

checkdnsrr — Check DNS records corresponding to a given Internet host name or IP address

closelog — Close connection to system logger

debugger_off — Disable internal PHP debugger (PHP 3)

debugger_on — Enable internal PHP debugger (PHP 3)

define_syslog_variables — Initializes all syslog related constants

dns_check_record — Alias of checkdnsrr()

dns_get_mx — Alias of getmxrr()

dns_get_record — Fetch DNS Resource Records associated with a hostname

fsockopen — Open Internet or Unix domain socket connection

gethostbyaddr — Get the Internet host name corresponding to a given IP address

gethostbyname — Get the IP address corresponding to a given Internet host name

gethostbynamel — Get a list of IP addresses corresponding to a given Internet host name

getmxrr — Get MX records corresponding to a given Internet host name

getprotobyname — Get protocol number associated with protocol name

getprotobynumber — Get protocol name associated with protocol number

getservbyname — Get port number associated with an Internet service and protocol

getservbyport — Get Internet service which corresponds to port and protocol

header — Send a raw HTTP header

headers_list — Returns a list of response headers sent (or ready to send)

headers_sent — Checks if or where headers have been sent

inet_ntop — Converts a packed internet address to a human readable representation

inet_pton — Converts a human readable IP address to its packed in_addr representation

ip2long — Converts a string containing an (IPv4) Internet Protocol dotted address into a proper address

long2ip — Converts an (IPv4) Internet network address into a string in Internet standard dotted format

openlog — Open connection to system logger

pfsockopen — Open persistent Internet or Unix domain socket connection

setcookie — Send a cookie

setrawcookie — Send a cookie without urlencoding the cookie value

socket_get_status — Alias of stream_get_meta_data()

socket_set_blocking — Alias of stream_set_blocking()

socket_set_timeout — Alias of stream_set_timeout()

syslog — Generate a system log message

CIII. Newt

newt_bell — Send a beep to the terminal

newt_button_bar — This function returns a grid containing the buttons created.

newt_button — Create a new button

newt_centered_window — Open a centered window of the specified size

newt_checkbox_get_value — Retreives value of checkox resource

newt_checkbox_set_flags — Configures checkbox resource

newt_checkbox_set_value — Sets the value of the checkbox

newt_checkbox_tree_add_item — Adds new item to the checkbox tree

newt_checkbox_tree_find_item — Finds an item in the checkbox tree

newt_checkbox_tree_get_current — Returns checkbox tree selected item

newt_checkbox_tree_get_entry_value

newt_checkbox_tree_get_multi_selection

newt_checkbox_tree_get_selection

newt_checkbox_tree_multi

newt_checkbox_tree_set_current

newt_checkbox_tree_set_entry_value

newt_checkbox_tree_set_entry

newt_checkbox_tree_set_width

newt_checkbox_tree

newt_checkbox

newt_clear_key_buffer — Discards the contents of the terminal's input buffer without waiting for additional input

newt_cls

newt_compact_button

newt_component_add_callback

newt_component_takes_focus

newt_create_grid

newt_cursor_off

newt_cursor_on

newt_delay

newt_draw_form

newt_draw_root_text — Displays the string text at the position indicated

newt_entry_get_value

newt_entry_set_filter

newt_entry_set_flags

newt_entry_set

newt_entry

newt_finished — Uninitializes newt interface

newt_form_add_component — Adds a single component to the form

newt_form_add_components — Add several components to the form

newt_form_add_hot_key

newt_form_destroy — Destroys a form

newt_form_get_current

newt_form_run — Runs a form

newt_form_set_background

newt_form_set_height

newt_form_set_size

newt_form_set_timer

newt_form_set_width

newt_form_watch_fd

newt_form — Create a form

newt_get_screen_size — Fills in the passed references with the current size of the terminal

newt_grid_add_components_to_form

newt_grid_basic_window

newt_grid_free

newt_grid_get_size

newt_grid_h_close_stacked

newt_grid_h_stacked

newt_grid_place

newt_grid_set_field

newt_grid_simple_window

newt_grid_v_close_stacked

newt_grid_v_stacked

newt_grid_wrapped_window_at

newt_grid_wrapped_window

newt_init — Initialize newt

newt_label_set_text

newt_label

newt_listbox_append_entry

newt_listbox_clear_selection

newt_listbox_clear

newt_listbox_delete_entry

newt_listbox_get_current

newt_listbox_get_selection

newt_listbox_insert_entry

newt_listbox_item_count

newt_listbox_select_item

newt_listbox_set_current_by_key

newt_listbox_set_current

newt_listbox_set_data

newt_listbox_set_entry

newt_listbox_set_width

newt_listbox

newt_listitem_get_data

newt_listitem_set

newt_listitem

newt_open_window — Open a window of the specified size and position

newt_pop_help_line — Replaces the current help line with the one from the stack

newt_pop_window — Removes the top window from the display

newt_push_help_line — Saves the current help line on a stack, and displays the new line

newt_radio_get_current

newt_radiobutton

newt_redraw_help_line

newt_reflow_text

newt_refresh — Updates modified portions of the screen

newt_resize_screen

newt_resume — Resume using the newt interface after calling newt_suspend()

newt_run_form — Runs a form

newt_scale_set

newt_scale

newt_scrollbar_set

newt_set_help_callback

newt_set_suspend_callback — Set a callback function which gets invoked when user presses the suspend key

newt_suspend — Tells newt to return the terminal to its initial state

newt_textbox_get_num_lines

newt_textbox_reflowed

newt_textbox_set_height

newt_textbox_set_text

newt_textbox

newt_vertical_scrollbar

newt_wait_for_key — Doesn't return until a key has been pressed

newt_win_choice

newt_win_entries

newt_win_menu

newt_win_message

newt_win_messagev

newt_win_ternary

CIV. NSAPI

nsapi_request_headers — Fetch all HTTP request headers

nsapi_response_headers — Fetch all HTTP response headers

nsapi_virtual — Perform an NSAPI sub-request

CV. Object Aggregation

aggregate_info — Gets aggregation information for a given object

aggregate_methods_by_list — Selective dynamic class methods aggregation to an object

aggregate_methods_by_regexp — Selective class methods aggregation to an object using a regular expression

aggregate_methods — Dynamic class and object aggregation of methods

aggregate_properties_by_list — Selective dynamic class properties aggregation to an object

aggregate_properties_by_regexp — Selective class properties aggregation to an object using a regular expression

aggregate_properties — Dynamic aggregation of class properties to an object

aggregate — Dynamic class and object aggregation of methods and properties

aggregation_info — Alias of aggregate_info()

deaggregate — Removes the aggregated methods and properties from an object

CVI. Object overloading

overload — Enable property and method call overloading for a class

CVII. OCI8

oci_bind_array_by_name — Binds PHP array to Oracle PL/SQL array by name

oci_bind_by_name — Binds the PHP variable to the Oracle placeholder

oci_cancel — Cancels reading from cursor

oci_close — Closes Oracle connection

OCI-Collection->append — Appends element to the collection

OCI-Collection->assign — Assigns a value to the collection from another existing collection

OCI-Collection->assignElem — Assigns a value to the element of the collection

OCI-Collection->free — Frees the resources associated with the collection object

OCI-Collection->getElem — Returns value of the element

OCI-Collection->max — Returns the maximum number of elements in the collection

OCI-Collection->size — Returns size of the collection

OCI-Collection->trim — Trims elements from the end of the collection

oci_commit — Commits outstanding statements

oci_connect — Establishes a connection to the Oracle server

oci_define_by_name — Uses a PHP variable for the define-step during a SELECT

oci_error — Returns the last error found

oci_execute — Executes a statement

oci_fetch_all — Fetches all rows of result data into an array

oci_fetch_array — Returns the next row from the result data as an associative or numeric array, or both

oci_fetch_assoc — Returns the next row from the result data as an associative array

oci_fetch_object — Returns the next row from the result data as an object

oci_fetch_row — Returns the next row from the result data as a numeric array

oci_fetch — Fetches the next row into result-buffer

oci_field_is_null — Checks if the field is NULL

oci_field_name — Returns the name of a field from the statement

oci_field_precision — Tell the precision of a field

oci_field_scale — Tell the scale of the field

oci_field_size — Returns field's size

oci_field_type_raw — Tell the raw Oracle data type of the field

oci_field_type — Returns field's data type

oci_free_statement — Frees all resources associated with statement or cursor

oci_internal_debug — Enables or disables internal debug output

OCI-Lob->append — Appends data from the large object to another large object

OCI-Lob->close — Closes LOB descriptor

oci_lob_copy — Copies large object

OCI-Lob->eof — Tests for end-of-file on a large object's descriptor

OCI-Lob->erase — Erases a specified portion of the internal LOB data

OCI-Lob->export — Exports LOB's contents to a file

OCI-Lob->flush — Flushes/writes buffer of the LOB to the server

OCI-Lob->free — Frees resources associated with the LOB descriptor

OCI-Lob->getBuffering — Returns current state of buffering for the large object

OCI-Lob->import — Imports file data to the LOB

oci_lob_is_equal — Compares two LOB/FILE locators for equality

OCI-Lob->load — Returns large object's contents

OCI-Lob->read — Reads part of the large object

OCI-Lob->rewind — Moves the internal pointer to the beginning of the large object

OCI-Lob->save — Saves data to the large object

OCI-Lob->saveFile — Alias of oci_lob_import()

OCI-Lob->seek — Sets the internal pointer of the large object

OCI-Lob->setBuffering — Changes current state of buffering for the large object

OCI-Lob->size — Returns size of large object

OCI-Lob->tell — Returns current position of internal pointer of large object

OCI-Lob->truncate — Truncates large object

OCI-Lob->write — Writes data to the large object

OCI-Lob->writeTemporary — Writes temporary large object

OCI-Lob->writeToFile — Alias of oci_lob_export()

oci_new_collection — Allocates new collection object

oci_new_connect — Establishes a new connection to the Oracle server

oci_new_cursor — Allocates and returns a new cursor (statement handle)

oci_new_descriptor — Initializes a new empty LOB or FILE descriptor

oci_num_fields — Returns the number of result columns in a statement

oci_num_rows — Returns number of rows affected during statement execution

oci_parse — Prepares Oracle statement for execution

oci_password_change — Changes password of Oracle's user

oci_pconnect — Connect to an Oracle database using a persistent connection

oci_result — Returns field's value from the fetched row

oci_rollback — Rolls back outstanding transaction

oci_server_version — Returns server version

oci_set_prefetch — Sets number of rows to be prefetched

oci_statement_type — Returns the type of an OCI statement

ocibindbyname — Alias of oci_bind_by_name()

ocicancel — Alias of oci_cancel()

ocicloselob — Alias of OCI-Lob->close

ocicollappend — Alias of OCI-Collection->append

ocicollassign — Alias of OCI-Collection->assign

ocicollassignelem — Alias of OCI-Collection->assignElem

ocicollgetelem — Alias of OCI-Collection->getElem

ocicollmax — Alias of OCI-Collection->max

ocicollsize — Alias of OCI-Collection->size

ocicolltrim — Alias of OCI-Collection->trim

ocicolumnisnull — Alias of oci_field_is_null()

ocicolumnname — Alias of oci_field_name()

ocicolumnprecision — Alias of oci_field_precision()

ocicolumnscale — Alias of oci_field_scale()

ocicolumnsize — Alias of oci_field_size()

ocicolumntype — Alias of oci_field_type()

ocicolumntyperaw — Alias of oci_field_type_raw()

ocicommit — Alias of oci_commit()

ocidefinebyname — Alias of oci_define_by_name()

ocierror — Alias of oci_error()

ociexecute — Alias of oci_execute()

ocifetch — Alias of oci_fetch()

ocifetchinto — Fetches the next row into an array (deprecated)

ocifetchstatement — Alias of oci_fetch_all()

ocifreecollection — Alias of OCI-Collection->free

ocifreecursor — Alias of oci_free_statement()

ocifreedesc — Alias of OCI-Lob->free

ocifreestatement — Alias of oci_free_statement()

ociinternaldebug — Alias of oci_internal_debug()

ociloadlob — Alias of OCI-Lob->load

ocilogoff — Alias of oci_close()

ocilogon — Alias of oci_connect()

ocinewcollection — Alias of oci_new_collection()

ocinewcursor — Alias of oci_new_cursor()

ocinewdescriptor — Alias of oci_new_descriptor()

ocinlogon — Alias of oci_new_connect()

ocinumcols — Alias of oci_num_fields()

ociparse — Alias of oci_parse()

ociplogon — Alias of oci_pconnect()

ociresult — Alias of oci_result()

ocirollback — Alias of oci_rollback()

ocirowcount — Alias of oci_num_rows()

ocisavelob — Alias of OCI-Lob->save

ocisavelobfile — Alias of OCI-Lob->import

ociserverversion — Alias of oci_server_version()

ocisetprefetch — Alias of oci_set_prefetch()

ocistatementtype — Alias of oci_statement_type()

ociwritelobtofile — Alias of OCI-Lob->export

ociwritetemporarylob — Alias of OCI-Lob->writeTemporary

CVIII. ODBC

odbc_autocommit — Toggle autocommit behaviour

odbc_binmode — Handling of binary column data

odbc_close_all — Close all ODBC connections

odbc_close — Close an ODBC connection

odbc_columnprivileges — Returns a result identifier that can be used to fetch a list of columns and associated privileges

odbc_columns — Lists the column names in specified tables

odbc_commit — Commit an ODBC transaction

odbc_connect — Connect to a datasource

odbc_cursor — Get cursorname

odbc_data_source — Returns information about a current connection

odbc_do — Synonym for odbc_exec()

odbc_error — Get the last error code

odbc_errormsg — Get the last error message

odbc_exec — Prepare and execute a SQL statement

odbc_execute — Execute a prepared statement

odbc_fetch_array — Fetch a result row as an associative array

odbc_fetch_into — Fetch one result row into array

odbc_fetch_object — Fetch a result row as an object

odbc_fetch_row — Fetch a row

odbc_field_len — Get the length (precision) of a field

odbc_field_name — Get the columnname

odbc_field_num — Return column number

odbc_field_precision — Synonym for odbc_field_len()

odbc_field_scale — Get the scale of a field

odbc_field_type — Datatype of a field

odbc_foreignkeys — Returns a list of foreign keys in the specified table or a list of foreign keys in other tables that refer to the primary key in the specified table

odbc_free_result — Free resources associated with a result

odbc_gettypeinfo — Returns a result identifier containing information about data types supported by the data source

odbc_longreadlen — Handling of LONG columns

odbc_next_result — Checks if multiple results are available

odbc_num_fields — Number of columns in a result

odbc_num_rows — Number of rows in a result

odbc_pconnect — Open a persistent database connection

odbc_prepare — Prepares a statement for execution

odbc_primarykeys — Returns a result identifier that can be used to fetch the column names that comprise the primary key for a table

odbc_procedurecolumns — Retrieve information about parameters to procedures

odbc_procedures — Get the list of procedures stored in a specific data source

odbc_result_all — Print result as HTML table

odbc_result — Get result data

odbc_rollback — Rollback a transaction

odbc_setoption — Adjust ODBC settings

odbc_specialcolumns — Returns either the optimal set of columns that uniquely identifies a row in the table or columns that are automatically updated when any value in the row is updated by a transaction

odbc_statistics — Retrieve statistics about a table

odbc_tableprivileges — Lists tables and the privileges associated with each table

odbc_tables — Get the list of table names stored in a specific data source

CIX. ODBC and DB2 (PDO)

PDO_ODBC DSN — Connecting to ODBC or DB2 databases

CX. OGG/Vorbis

Usage — Examples on using the ogg:// wrapper.

CXI. openal

openal_buffer_create — Generate OpenAL buffer

openal_buffer_data — Load a buffer with data

openal_buffer_destroy — Destroys an OpenAL buffer

openal_buffer_get — Retrieve an OpenAL buffer property

openal_buffer_loadwav — Load a .wav file into a buffer

openal_context_create — Create an audio processing context

openal_context_current — Make the specified context current

openal_context_destroy — Destroys a context

openal_context_process — Process the specified context

openal_context_suspend — Suspend the specified context

openal_device_close — Close an OpenAL device

openal_device_open — Initialize the OpenAL audio layer

openal_listener_get — Retrieve a listener property

openal_listener_set — Set a listener property

openal_source_create — Generate a source resource

openal_source_destroy — Destroy a source resource

openal_source_get — Retrieve an OpenAL source property

openal_source_pause — Pause the source

openal_source_play — Start playing the source

openal_source_rewind — Rewind the source

openal_source_set — Set source property

openal_source_stop — Stop playing the source

openal_stream — Begin streaming on a source

CXII. OpenSSL

openssl_csr_export_to_file — Exports a CSR to a file

openssl_csr_export — Exports a CSR as a string

openssl_csr_get_public_key — Returns the public key of a CERT

openssl_csr_get_subject — Returns the subject of a CERT

openssl_csr_new — Generates a CSR

openssl_csr_sign — Sign a CSR with another certificate (or itself) and generate a certificate

openssl_error_string — Return openSSL error message

openssl_free_key — Free key resource

openssl_get_privatekey — Alias of openssl_pkey_get_private()

openssl_get_publickey — Alias of openssl_pkey_get_public()

openssl_open — Open sealed data

openssl_pkcs12_export_to_file — Exports a PKCS#12 Compatible Certificate Store File

openssl_pkcs12_export — Exports a PKCS#12 Compatible Certificate Store File to variable.

openssl_pkcs12_read — Parse a PKCS#12 Certificate Store into an array

openssl_pkcs7_decrypt — Decrypts an S/MIME encrypted message

openssl_pkcs7_encrypt — Encrypt an S/MIME message

openssl_pkcs7_sign — Sign an S/MIME message

openssl_pkcs7_verify — Verifies the signature of an S/MIME signed message

openssl_pkey_export_to_file — Gets an exportable representation of a key into a file

openssl_pkey_export — Gets an exportable representation of a key into a string

openssl_pkey_free — Frees a private key

openssl_pkey_get_details — Returns an array with the key details

openssl_pkey_get_private — Get a private key

openssl_pkey_get_public — Extract public key from certificate and prepare it for use

openssl_pkey_new — Generates a new private key

openssl_private_decrypt — Decrypts data with private key

openssl_private_encrypt — Encrypts data with private key

openssl_public_decrypt — Decrypts data with public key

openssl_public_encrypt — Encrypts data with public key

openssl_seal — Seal (encrypt) data

openssl_sign — Generate signature

openssl_verify — Verify signature

openssl_x509_check_private_key — Checks if a private key corresponds to a certificate

openssl_x509_checkpurpose — Verifies if a certificate can be used for a particular purpose

openssl_x509_export_to_file — Exports a certificate to file

openssl_x509_export — Exports a certificate as a string

openssl_x509_free — Free certificate resource

openssl_x509_parse — Parse an X509 certificate and return the information as an array

openssl_x509_read — Parse an X.509 certificate and return a resource identifier for it

CXIII. Oracle

ora_bind — Binds a PHP variable to an Oracle parameter

ora_close — Closes an Oracle cursor

ora_columnname — Gets the name of an Oracle result column

ora_columnsize — Returns the size of an Oracle result column

ora_columntype — Gets the type of an Oracle result column

ora_commit — Commit an Oracle transaction

ora_commitoff — Disable automatic commit

ora_commiton — Enable automatic commit

ora_do — Parse, Exec, Fetch

ora_error — Gets an Oracle error message

ora_errorcode — Gets an Oracle error code

ora_exec — Execute a parsed statement on an Oracle cursor

ora_fetch_into — Fetch a row into the specified result array

ora_fetch — Fetch a row of data from a cursor

ora_getcolumn — Get data from a fetched column

ora_logoff — Close an Oracle connection

ora_logon — Open an Oracle connection

ora_numcols — Returns the number of columns

ora_numrows — Returns the number of rows

ora_open — Opens an Oracle cursor

ora_parse — Parse an SQL statement with Oracle

ora_plogon — Open a persistent Oracle connection

ora_rollback — Rolls back a transaction

CXIV. Oracle (PDO)

PDO_OCI DSN — Connecting to Oracle databases

CXV. Output Control

flush — Flush the output buffer

ob_clean — Clean (erase) the output buffer

ob_end_clean — Clean (erase) the output buffer and turn off output buffering

ob_end_flush — Flush (send) the output buffer and turn off output buffering

ob_flush — Flush (send) the output buffer

ob_get_clean — Get current buffer contents and delete current output buffer

ob_get_contents — Return the contents of the output buffer

ob_get_flush — Flush the output buffer, return it as a string and turn off output buffering

ob_get_length — Return the length of the output buffer

ob_get_level — Return the nesting level of the output buffering mechanism

ob_get_status — Get status of output buffers

ob_gzhandler — ob_start callback function to gzip output buffer

ob_implicit_flush — Turn implicit flush on/off

ob_list_handlers — List all output handlers in use

ob_start — Turn on output buffering

output_add_rewrite_var — Add URL rewriter values

output_reset_rewrite_vars — Reset URL rewriter values

CXVI. OvrimosSQL

ovrimos_close — Closes the connection to ovrimos

ovrimos_commit — Commits the transaction

ovrimos_connect — Connect to the specified database

ovrimos_cursor — Returns the name of the cursor

ovrimos_exec — Executes an SQL statement

ovrimos_execute — Executes a prepared SQL statement

ovrimos_fetch_into — Fetches a row from the result set

ovrimos_fetch_row — Fetches a row from the result set

ovrimos_field_len — Returns the length of the output column

ovrimos_field_name — Returns the output column name

ovrimos_field_num — Returns the (1-based) index of the output column

ovrimos_field_type — Returns the type of the output column

ovrimos_free_result — Frees the specified result_id

ovrimos_longreadlen — Specifies how many bytes are to be retrieved from long datatypes

ovrimos_num_fields — Returns the number of columns

ovrimos_num_rows — Returns the number of rows affected by update operations

ovrimos_prepare — Prepares an SQL statement

ovrimos_result_all — Prints the whole result set as an HTML table

ovrimos_result — Retrieves the output column

ovrimos_rollback — Rolls back the transaction

CXVII. Paradox

px_close — Closes a paradox database

px_create_fp — Create a new paradox database

px_date2string — Converts a date into a string.

px_delete_record — Deletes record from paradox database

px_delete — Deletes resource of paradox database

px_get_field — Returns the specification of a single field

px_get_info — Return lots of information about a paradox file

px_get_parameter — Gets a parameter

px_get_record — Returns record of paradox database

px_get_schema — Returns the database schema

px_get_value — Gets a value

px_insert_record — Inserts record into paradox database

px_new — Create a new paradox object

px_numfields — Returns number of fields in a database

px_numrecords — Returns number of records in a database

px_open_fp — Open paradox database

px_put_record — Stores record into paradox database

px_retrieve_record — Returns record of paradox database

px_set_blob_file — Sets the file where blobs are read from

px_set_parameter — Sets a parameter

px_set_tablename — Sets the name of a table (deprecated)

px_set_targetencoding — Sets the encoding for character fields (deprecated)

px_set_value — Sets a value

px_timestamp2string — Converts the timestamp into a string.

px_update_record — Updates record in paradox database

CXVIII. Parsekit

parsekit_compile_file — Compile a string of PHP code and return the resulting op array

parsekit_compile_string — Compile a string of PHP code and return the resulting op array

parsekit_func_arginfo — Return information regarding function argument(s)

CXIX. PCNTL

pcntl_alarm — Set an alarm clock for delivery of a signal

pcntl_exec — Executes specified program in current process space

pcntl_fork — Forks the currently running process

pcntl_getpriority — Get the priority of any process

pcntl_setpriority — Change the priority of any process

pcntl_signal — Installs a signal handler

pcntl_wait — Waits on or returns the status of a forked child

pcntl_waitpid — Waits on or returns the status of a forked child

pcntl_wexitstatus — Returns the return code of a terminated child

pcntl_wifexited — Checks if status code represents a normal exit

pcntl_wifsignaled — Checks whether the status code represents a termination due to a signal

pcntl_wifstopped — Checks whether the child process is currently stopped

pcntl_wstopsig — Returns the signal which caused the child to stop

pcntl_wtermsig — Returns the signal which caused the child to terminate

CXX. PCRE

Pattern Modifiers — Describes possible modifiers in regex patterns

Pattern Syntax — Describes PCRE regex syntax

preg_grep — Return array entries that match the pattern

preg_last_error — Returns the error code of the last PCRE regex execution

preg_match_all — Perform a global regular expression match

preg_match — Perform a regular expression match

preg_quote — Quote regular expression characters

preg_replace_callback — Perform a regular expression search and replace using a callback

preg_replace — Perform a regular expression search and replace

preg_split — Split string by a regular expression

CXXI. PDF

PDF_activate_item — Activate structure element or other content item

PDF_add_annotation — Add annotation [deprecated]

PDF_add_bookmark — Add bookmark for current page [deprecated]

PDF_add_launchlink — Add launch annotation for current page [deprecated]

PDF_add_locallink — Add link annotation for current page [deprecated]

PDF_add_nameddest — Create named destination

PDF_add_note — Set annotation for current page [deprecated]

PDF_add_outline — Add bookmark for current page [deprecated]

PDF_add_pdflink — Add file link annotation for current page [deprecated]

PDF_add_table_cell — Add a cell to a new or existing table

PDF_add_textflow — Create Textflow or add text to existing Textflow

PDF_add_thumbnail — Add thumbnail for current page

PDF_add_weblink — Add weblink for current page [deprecated]

PDF_arc — Draw a counterclockwise circular arc segment

PDF_arcn — Draw a clockwise circular arc segment

PDF_attach_file — Add file attachment for current page [deprecated]

PDF_begin_document — Create new PDF file

PDF_begin_font — Start a Type 3 font definition

PDF_begin_glyph — Start glyph definition for Type 3 font

PDF_begin_item — Open structure element or other content item

PDF_begin_layer — Start layer

PDF_begin_page_ext — Start new page

PDF_begin_page — Start new page [deprecated]

PDF_begin_pattern — Start pattern definition

PDF_begin_template_ext — Start template definition

PDF_begin_template — Start template definition [deprecated]

PDF_circle — Draw a circle

PDF_clip — Clip to current path

PDF_close_image — Close image

PDF_close_pdi_page — Close the page handle

PDF_close_pdi — Close the input PDF document [deprecated]

PDF_close — Close pdf resource [deprecated]

PDF_closepath_fill_stroke — Close, fill and stroke current path

PDF_closepath_stroke — Close and stroke path

PDF_closepath — Close current path

PDF_concat — Concatenate a matrix to the CTM

PDF_continue_text — Output text in next line

PDF_create_3dview — Create 3D view

PDF_create_action — Create action for objects or events

PDF_create_annotation — Create rectangular annotation

PDF_create_bookmark — Create bookmark

PDF_create_field — Create form field

PDF_create_fieldgroup — Create form field group

PDF_create_gstate — Create graphics state object

PDF_create_pvf — Create PDFlib virtual file

PDF_create_textflow — Create textflow object

PDF_curveto — Draw Bezier curve

PDF_define_layer — Create layer definition

PDF_delete_pvf — Delete PDFlib virtual file

PDF_delete_table — Delete table object

PDF_delete_textflow — Delete textflow object

PDF_delete — Delete PDFlib object

PDF_encoding_set_char — Add glyph name and/or Unicode value

PDF_end_document — Close PDF file

PDF_end_font — Terminate Type 3 font definition

PDF_end_glyph — Terminate glyph definition for Type 3 font

PDF_end_item — Close structure element or other content item

PDF_end_layer — Deactivate all active layers

PDF_end_page_ext — Finish page

PDF_end_page — Finish page

PDF_end_pattern — Finish pattern

PDF_end_template — Finish template

PDF_endpath — End current path

PDF_fill_imageblock — Fill image block with variable data

PDF_fill_pdfblock — Fill PDF block with variable data

PDF_fill_stroke — Fill and stroke path

PDF_fill_textblock — Fill text block with variable data

PDF_fill — Fill current path

PDF_findfont — Prepare font for later use [deprecated]

PDF_fit_image — Place image or template

PDF_fit_pdi_page — Place imported PDF page

PDF_fit_table — Place table on page

PDF_fit_textflow — Format textflow in rectangular area

PDF_fit_textline — Place single line of text

PDF_get_apiname — Get name of unsuccessfull API function

PDF_get_buffer — Get PDF output buffer

PDF_get_errmsg — Get error text

PDF_get_errnum — Get error number

PDF_get_font — Get font [deprecated]

PDF_get_fontname — Get font name [deprecated]

PDF_get_fontsize — Font handling [deprecated]

PDF_get_image_height — Get image height [deprecated]

PDF_get_image_width — Get image width [deprecated]

PDF_get_majorversion — Get major version number [deprecated]

PDF_get_minorversion — Get minor version number [deprecated]

PDF_get_parameter — Get string parameter

PDF_get_pdi_parameter — Get PDI string parameter [deprecated]

PDF_get_pdi_value — Get PDI numerical parameter [deprecated]

PDF_get_value — Get numerical parameter

PDF_info_font — Query detailed information about a loaded font

PDF_info_matchbox — Query matchbox information

PDF_info_table — Retrieve table information

PDF_info_textflow — Query textflow state

PDF_info_textline — Perform textline formatting and query metrics

PDF_initgraphics — Reset graphic state

PDF_lineto — Draw a line

PDF_load_3ddata — Load 3D model

PDF_load_font — Search and prepare font

PDF_load_iccprofile — Search and prepare ICC profile

PDF_load_image — Open image file

PDF_makespotcolor — Make spot color

PDF_moveto — Set current point

PDF_new — Create PDFlib object

PDF_open_ccitt — Open raw CCITT image [deprecated]

PDF_open_file — Create PDF file [deprecated]

PDF_open_gif — Open GIF image [deprecated]

PDF_open_image_file — Read image from file [deprecated]

PDF_open_image — Use image data [deprecated]

PDF_open_jpeg — Open JPEG image [deprecated]

PDF_open_memory_image — Open image created with PHP's image functions [not supported]

PDF_open_pdi_page — Prepare a page

PDF_open_pdi — Open PDF file [deprecated]

PDF_open_tiff — Open TIFF image [deprecated]

PDF_pcos_get_number — Get value of pCOS path with type number or boolean

PDF_pcos_get_stream — Get contents of pCOS path with type stream, fstream, or string

PDF_pcos_get_string — Get value of pCOS path with type name, string, or boolean

PDF_place_image — Place image on the page [deprecated]

PDF_place_pdi_page — Place PDF page [deprecated]

PDF_process_pdi — Process imported PDF document

PDF_rect — Draw rectangle

PDF_restore — Restore graphics state

PDF_resume_page — Resume page

PDF_rotate — Rotate coordinate system

PDF_save — Save graphics state

PDF_scale — Scale coordinate system

PDF_set_border_color — Set border color of annotations [deprecated]

PDF_set_border_dash — Set border dash style of annotations [deprecated]

PDF_set_border_style — Set border style of annotations [deprecated]

PDF_set_char_spacing — Set character spacing [deprecated]

PDF_set_duration — Set duration between pages [deprecated]

PDF_set_gstate — Activate graphics state object

PDF_set_horiz_scaling — Set horizontal text scaling [deprecated]

PDF_set_info_author — Fill the author document info field [deprecated]

PDF_set_info_creator — Fill the creator document info field [deprecated]

PDF_set_info_keywords — Fill the keywords document info field [deprecated]

PDF_set_info_subject — Fill the subject document info field [deprecated]

PDF_set_info_title — Fill the title document info field [deprecated]

PDF_set_info — Fill document info field

PDF_set_layer_dependency — Define relationships among layers

PDF_set_leading — Set distance between text lines [deprecated]

PDF_set_parameter — Set string parameter

PDF_set_text_matrix — Set text matrix [deprecated]

PDF_set_text_pos — Set text position

PDF_set_text_rendering — Determine text rendering [deprecated]

PDF_set_text_rise — Set text rise [deprecated]

PDF_set_value — Set numerical parameter

PDF_set_word_spacing — Set spacing between words [deprecated]

PDF_setcolor — Set fill and stroke color

PDF_setdash — Set simple dash pattern

PDF_setdashpattern — Set dash pattern

PDF_setflat — Set flatness

PDF_setfont — Set font

PDF_setgray_fill — Set fill color to gray [deprecated]

PDF_setgray_stroke — Set stroke color to gray [deprecated]

PDF_setgray — Set color to gray [deprecated]

PDF_setlinecap — Set linecap parameter

PDF_setlinejoin — Set linejoin parameter

PDF_setlinewidth — Set line width

PDF_setmatrix — Set current transformation matrix

PDF_setmiterlimit — Set miter limit

PDF_setpolydash — Set complicated dash pattern [deprecated]

PDF_setrgbcolor_fill — Set fill rgb color values [deprecated]

PDF_setrgbcolor_stroke — Set stroke rgb color values [deprecated]

PDF_setrgbcolor — Set fill and stroke rgb color values [deprecated]

PDF_shading_pattern — Define shading pattern

PDF_shading — Define blend

PDF_shfill — Fill area with shading

PDF_show_boxed — Output text in a box [deprecated]

PDF_show_xy — Output text at given position

PDF_show — Output text at current position

PDF_skew — Skew the coordinate system

PDF_stringwidth — Return width of text

PDF_stroke — Stroke path

PDF_suspend_page — Suspend page

PDF_translate — Set origin of coordinate system

PDF_utf16_to_utf8 — Convert string from UTF-16 to UTF-8

PDF_utf32_to_utf16 — Convert string from UTF-32 to UTF-16

PDF_utf8_to_utf16 — Convert string from UTF-8 to UTF-16

CXXII. PDO

PDO->beginTransaction() — Initiates a transaction

PDO->commit() — Commits a transaction

PDO->__construct() — Creates a PDO instance representing a connection to a database

PDO->errorCode() — Fetch the SQLSTATE associated with the last operation on the database handle

PDO->errorInfo() — Fetch extended error information associated with the last operation on the database handle

PDO->exec() — Execute an SQL statement and return the number of affected rows

PDO->getAttribute() — Retrieve a database connection attribute

PDO->getAvailableDrivers() — Return an array of available PDO drivers

PDO->lastInsertId() — Returns the ID of the last inserted row or sequence value

PDO->prepare() — Prepares a statement for execution and returns a statement object

PDO->query() — Executes an SQL statement, returning a result set as a PDOStatement object

PDO->quote() — Quotes a string for use in a query.

PDO->rollBack() — Rolls back a transaction

PDO->setAttribute() — Set an attribute

PDOStatement->bindColumn() — Bind a column to a PHP variable

PDOStatement->bindParam() — Binds a parameter to the specified variable name

PDOStatement->bindValue() — Binds a value to a parameter

PDOStatement->closeCursor() — Closes the cursor, enabling the statement to be executed again.

PDOStatement->columnCount() — Returns the number of columns in the result set

PDOStatement->errorCode() — Fetch the SQLSTATE associated with the last operation on the statement handle

PDOStatement->errorInfo() — Fetch extended error information associated with the last operation on the statement handle

PDOStatement->execute() — Executes a prepared statement

PDOStatement->fetch() — Fetches the next row from a result set

PDOStatement->fetchAll() — Returns an array containing all of the result set rows

PDOStatement->fetchColumn() — Returns a single column from the next row of a result set

PDOStatement->fetchObject() — Fetches the next row and returns it as an object.

PDOStatement->getAttribute() — Retrieve a statement attribute

PDOStatement->getColumnMeta() — Returns metadata for a column in a result set

PDOStatement->nextRowset() — Advances to the next rowset in a multi-rowset statement handle

PDOStatement->rowCount() — Returns the number of rows affected by the last SQL statement

PDOStatement->setAttribute() — Set a statement attribute

PDOStatement->setFetchMode() — Set the default fetch mode for this statement

CXXIII. phar

Phar::apiVersion — Returns the api version

Phar::canCompress — Returns whether phar extension supports compression using either zlib or bzip2

Phar::canWrite — Returns whether phar extension supports writing and creating phars

Phar->compressAllFilesBZIP2 — Compresses all files in the current Phar archive using Bzip2 compression

Phar->compressAllFilesGZ — Compresses all files in the current Phar archive using Gzip compression

Phar::__construct — Construct a Phar archive object

Phar->count — Returns the number of entries (files) in the Phar archive

Phar->getMetaData — Returns phar archive meta-data

Phar->getModified — Return whether phar was modified

Phar->getSignature — Return MD5/SHA1 signature of a Phar archive

Phar->getStub — Return the PHP loader or bootstrap stub of a Phar archive

Phar->getVersion — Return version info of Phar archive

Phar->isBuffering — Used to determine whether Phar write operations are being buffered, or are flushing directly to disk

Phar::loadPhar — Loads any phar archive with an alias

Phar::mapPhar — Reads the currently executed file (a phar) and registers its manifest

Phar::offsetExists — determines whether a file exists in the phar

Phar::offsetGet — get a PharFileInfo object for a specific file

Phar::offsetSet — set the contents of an internal file to those of an external file

Phar::offsetUnset — remove a file from a phar

Phar->setMetaData — Sets phar archive meta-data

Phar->setStub — Used to set the PHP loader or bootstrap stub of a Phar archive

Phar->startBuffering — Start buffering Phar write operations, do not modify the Phar object on disk

Phar->stopBuffering — Stop buffering write requests to the Phar archive, and save changes to disk

Phar->uncompressAllFiles — Uncompresses all files in the current Phar archive

PharFileInfo->chmod — Sets file-specific permission bits

PharFileInfo::__construct — Construct a Phar entry object

PharFileInfo->getCompressedSize — Returns the actual size of the file (with compression) inside the Phar archive

PharFileInfo->getCRC32 — Returns CRC32 code or throws an exception if not CRC checked

PharFileInfo->getMetaData — Returns file-specific meta-data saved with a file

PharFileInfo->getPharFlags — Returns the Phar file entry flags

PharFileInfo->isCompressed — Returns whether the entry is compressed

PharFileInfo->isCompressedBZIP2 — Returns whether the entry is compressed using bzip2

PharFileInfo->isCompressedGZ — Returns whether the entry is compressed using gz

PharFileInfo->isCRCChecked — Returns whether file entry has had its CRC verified

PharFileInfo->setCompressedBZIP2 — Compresses the current Phar entry within the phar using Bzip2 compression

PharFileInfo->setCompressedGZ — Compresses the current Phar entry within the phar using gz compression

PharFileInfo->setMetaData — Sets file-specific meta-data saved with a file

PharFileInfo->setUncompressed — Uncompresses the current Phar entry within the phar, if it is compressed

CXXIV. PHP Options/Info

assert_options — Set/get the various assert flags

assert — Checks if assertion is FALSE

dl — Loads a PHP extension at runtime

extension_loaded — Find out whether an extension is loaded

get_cfg_var — Gets the value of a PHP configuration option

get_current_user — Gets the name of the owner of the current PHP script

get_defined_constants — Returns an associative array with the names of all the constants and their values

get_extension_funcs — Returns an array with the names of the functions of a module

get_include_path — Gets the current include_path configuration option

get_included_files — Returns an array with the names of included or required files

get_loaded_extensions — Returns an array with the names of all modules compiled and loaded

get_magic_quotes_gpc — Gets the current configuration setting of magic quotes gpc

get_magic_quotes_runtime — Gets the current active configuration setting of magic_quotes_runtime

get_required_files — Alias of get_included_files()

getenv — Gets the value of an environment variable

getlastmod — Gets time of last page modification

getmygid — Get PHP script owner's GID

getmyinode — Gets the inode of the current script

getmypid — Gets PHP's process ID

getmyuid — Gets PHP script owner's UID

getopt — Gets options from the command line argument list

getrusage — Gets the current resource usages

ini_alter — Alias of ini_set()

ini_get_all — Gets all configuration options

ini_get — Gets the value of a configuration option

ini_restore — Restores the value of a configuration option

ini_set — Sets the value of a configuration option

main — Dummy for main()

memory_get_peak_usage — Returns the peak of memory allocated by PHP

memory_get_usage — Returns the amount of memory allocated to PHP

php_ini_scanned_files — Return a list of .ini files parsed from the additional ini dir

php_logo_guid — Gets the logo guid

php_sapi_name — Returns the type of interface between web server and PHP

php_uname — Returns information about the operating system PHP is running on

phpcredits — Prints out the credits for PHP

phpinfo — Outputs lots of PHP information

phpversion — Gets the current PHP version

putenv — Sets the value of an environment variable

restore_include_path — Restores the value of the include_path configuration option

set_include_path — Sets the include_path configuration option

set_magic_quotes_runtime — Sets the current active configuration setting of magic_quotes_runtime

set_time_limit — Limits the maximum execution time

sys_get_temp_dir — Returns directory path used for temporary files

version_compare — Compares two "PHP-standardized" version number strings

zend_logo_guid — Gets the Zend guid

zend_thread_id — Returns a unique identifier for the current thread

zend_version — Gets the version of the current Zend engine

CXXV. POSIX

posix_access — Determine accessibility of a file

posix_ctermid — Get path name of controlling terminal

posix_get_last_error — Retrieve the error number set by the last posix function that failed

posix_getcwd — Pathname of current directory

posix_getegid — Return the effective group ID of the current process

posix_geteuid — Return the effective user ID of the current process

posix_getgid — Return the real group ID of the current process

posix_getgrgid — Return info about a group by group id

posix_getgrnam — Return info about a group by name

posix_getgroups — Return the group set of the current process

posix_getlogin — Return login name

posix_getpgid — Get process group id for job control

posix_getpgrp — Return the current process group identifier

posix_getpid — Return the current process identifier

posix_getppid — Return the parent process identifier

posix_getpwnam — Return info about a user by username

posix_getpwuid — Return info about a user by user id

posix_getrlimit — Return info about system resource limits

posix_getsid — Get the current sid of the process

posix_getuid — Return the real user ID of the current process

posix_initgroups — Calculate the group access list

posix_isatty — Determine if a file descriptor is an interactive terminal

posix_kill — Send a signal to a process

posix_mkfifo — Create a fifo special file (a named pipe)

posix_mknod — Create a special or ordinary file (POSIX.1)

posix_setegid — Set the effective GID of the current process

posix_seteuid — Set the effective UID of the current process

posix_setgid — Set the GID of the current process

posix_setpgid — Set process group id for job control

posix_setsid — Make the current process a session leader

posix_setuid — Set the UID of the current process

posix_strerror — Retrieve the system error message associated with the given errno

posix_times — Get process times

posix_ttyname — Determine terminal device name

posix_uname — Get system name

CXXVI. POSIX Regex

ereg_replace — Replace regular expression

ereg — Regular expression match

eregi_replace — Replace regular expression case insensitive

eregi — Case insensitive regular expression match

split — Split string into array by regular expression

spliti — Split string into array by regular expression case insensitive

sql_regcase — Make regular expression for case insensitive match

CXXVII. PostgreSQL

pg_affected_rows — Returns number of affected records (tuples)

pg_cancel_query — Cancel an asynchronous query

pg_client_encoding — Gets the client encoding

pg_close — Closes a PostgreSQL connection

pg_connect — Open a PostgreSQL connection

pg_connection_busy — Get connection is busy or not

pg_connection_reset — Reset connection (reconnect)

pg_connection_status — Get connection status

pg_convert — Convert associative array values into suitable for SQL statement

pg_copy_from — Insert records into a table from an array

pg_copy_to — Copy a table to an array

pg_dbname — Get the database name

pg_delete — Deletes records

pg_end_copy — Sync with PostgreSQL backend

pg_escape_bytea — Escape a string for insertion into a bytea field

pg_escape_string — Escape a string for insertion into a text field

pg_execute — Sends a request to execute a prepared statement with given parameters, and waits for the result.

pg_fetch_all_columns — Fetches all rows in a particular result column as an array

pg_fetch_all — Fetches all rows from a result as an array

pg_fetch_array — Fetch a row as an array

pg_fetch_assoc — Fetch a row as an associative array

pg_fetch_object — Fetch a row as an object

pg_fetch_result — Returns values from a result resource

pg_fetch_row — Get a row as an enumerated array

pg_field_is_null — Test if a field is SQL NULL

pg_field_name — Returns the name of a field

pg_field_num — Returns the field number of the named field

pg_field_prtlen — Returns the printed length

pg_field_size — Returns the internal storage size of the named field

pg_field_table — Returns the name or oid of the tables field

pg_field_type_oid — Returns the type ID (OID) for the corresponding field number

pg_field_type — Returns the type name for the corresponding field number

pg_free_result — Free result memory

pg_get_notify — Gets SQL NOTIFY message

pg_get_pid — Gets the backend's process ID

pg_get_result — Get asynchronous query result

pg_host — Returns the host name associated with the connection

pg_insert — Insert array into table

pg_last_error — Get the last error message string of a connection

pg_last_notice — Returns the last notice message from PostgreSQL server

pg_last_oid — Returns the last row's OID

pg_lo_close — Close a large object

pg_lo_create — Create a large object

pg_lo_export — Export a large object to file

pg_lo_import — Import a large object from file

pg_lo_open — Open a large object

pg_lo_read_all — Reads an entire large object and send straight to browser

pg_lo_read — Read a large object

pg_lo_seek — Seeks position within a large object

pg_lo_tell — Returns current seek position a of large object

pg_lo_unlink — Delete a large object

pg_lo_write — Write to a large object

pg_meta_data — Get meta data for table

pg_num_fields — Returns the number of fields in a result

pg_num_rows — Returns the number of rows in a result

pg_options — Get the options associated with the connection

pg_parameter_status — Looks up a current parameter setting of the server.

pg_pconnect — Open a persistent PostgreSQL connection

pg_ping — Ping database connection

pg_port — Return the port number associated with the connection

pg_prepare — Submits a request to create a prepared statement with the given parameters, and waits for completion.

pg_put_line — Send a NULL-terminated string to PostgreSQL backend

pg_query_params — Submits a command to the server and waits for the result, with the ability to pass parameters separately from the SQL command text.

pg_query — Execute a query

pg_result_error_field — Returns an individual field of an error report.

pg_result_error — Get error message associated with result

pg_result_seek — Set internal row offset in result resource

pg_result_status — Get status of query result

pg_select — Select records

pg_send_execute — Sends a request to execute a prepared statement with given parameters, without waiting for the result(s).

pg_send_prepare — Sends a request to create a prepared statement with the given parameters, without waiting for completion.

pg_send_query_params — Submits a command and separate parameters to the server without waiting for the result(s).

pg_send_query — Sends asynchronous query

pg_set_client_encoding — Set the client encoding

pg_set_error_verbosity — Determines the verbosity of messages returned by pg_last_error() and pg_result_error().

pg_trace — Enable tracing a PostgreSQL connection

pg_transaction_status — Returns the current in-transaction status of the server.

pg_tty — Return the TTY name associated with the connection

pg_unescape_bytea — Unescape binary for bytea type

pg_untrace — Disable tracing of a PostgreSQL connection

pg_update — Update table

pg_version — Returns an array with client, protocol and server version (when available)

CXXVIII. PostgreSQL (PDO)

PDO_PGSQL DSN — Connecting to PostgreSQL databases

PDO::pgsqlLOBCreate — Creates a new large object

PDO::pgsqlLOBOpen — Opens an existing large object stream

PDO::pgsqlLOBUnlink — Deletes the large object

CXXIX. Printer

printer_abort — Deletes the printer's spool file

printer_close — Close an open printer connection

printer_create_brush — Create a new brush

printer_create_dc — Create a new device context

printer_create_font — Create a new font

printer_create_pen — Create a new pen

printer_delete_brush — Delete a brush

printer_delete_dc — Delete a device context

printer_delete_font — Delete a font

printer_delete_pen — Delete a pen

printer_draw_bmp — Draw a bmp

printer_draw_chord — Draw a chord

printer_draw_elipse — Draw an ellipse

printer_draw_line — Draw a line

printer_draw_pie — Draw a pie

printer_draw_rectangle — Draw a rectangle

printer_draw_roundrect — Draw a rectangle with rounded corners

printer_draw_text — Draw text

printer_end_doc — Close document

printer_end_page — Close active page

printer_get_option — Retrieve printer configuration data

printer_list — Return an array of printers attached to the server

printer_logical_fontheight — Get logical font height

printer_open — Opens a connection to a printer

printer_select_brush — Select a brush

printer_select_font — Select a font

printer_select_pen — Select a pen

printer_set_option — Configure the printer connection

printer_start_doc — Start a new document

printer_start_page — Start a new page

printer_write — Write data to the printer

CXXX. Program Execution

escapeshellarg — Escape a string to be used as a shell argument

escapeshellcmd — Escape shell metacharacters

exec — Execute an external program

passthru — Execute an external program and display raw output

proc_close — Close a process opened by proc_open() and return the exit code of that process.

proc_get_status — Get information about a process opened by proc_open()

proc_nice — Change the priority of the current process

proc_open — Execute a command and open file pointers for input/output

proc_terminate — Kills a process opened by proc_open

shell_exec — Execute command via shell and return the complete output as a string

system — Execute an external program and display the output

CXXXI. PS

ps_add_bookmark — Add bookmark to current page

ps_add_launchlink — Adds link which launches file

ps_add_locallink — Adds link to a page in the same document

ps_add_note — Adds note to current page

ps_add_pdflink — Adds link to a page in a second pdf document

ps_add_weblink — Adds link to a web location

ps_arc — Draws an arc counterclockwise

ps_arcn — Draws an arc clockwise

ps_begin_page — Start a new page

ps_begin_pattern — Start a new pattern

ps_begin_template — Start a new template

ps_circle — Draws a circle

ps_clip — Clips drawing to current path

ps_close_image — Closes image and frees memory

ps_close — Closes a PostScript document

ps_closepath_stroke — Closes and strokes path

ps_closepath — Closes path

ps_continue_text — Continue text in next line

ps_curveto — Draws a curve

ps_delete — Deletes all resources of a PostScript document

ps_end_page — End a page

ps_end_pattern — End a pattern

ps_end_template — End a template

ps_fill_stroke — Fills and strokes the current path

ps_fill — Fills the current path

ps_findfont — Loads a font

ps_get_buffer — Fetches the full buffer containig the generated PS data

ps_get_parameter — Gets certain parameters

ps_get_value — Gets certain values

ps_hyphenate — Hyphenates a word

ps_include_file — Reads an external file with raw PostScript code

ps_lineto — Draws a line

ps_makespotcolor — Create spot color

ps_moveto — Sets current point

ps_new — Creates a new PostScript document object

ps_open_file — Opens a file for output

ps_open_image_file — Opens image from file

ps_open_image — Reads an image for later placement

ps_open_memory_image — Takes an GD image and returns an image for placement in a PS document

ps_place_image — Places image on the page

ps_rect — Draws a rectangle

ps_restore — Restore previously save context

ps_rotate — Sets rotation factor

ps_save — Save current context

ps_scale — Sets scaling factor

ps_set_border_color — Sets color of border for annotations

ps_set_border_dash — Sets length of dashes for border of annotations

ps_set_border_style — Sets border style of annotations

ps_set_info — Sets information fields of document

ps_set_parameter — Sets certain parameters

ps_set_text_pos — Sets position for text output

ps_set_value — Sets certain values

ps_setcolor — Sets current color

ps_setdash — Sets appearance of a dashed line

ps_setflat — Sets flatness

ps_setfont — Sets font to use for following output

ps_setgray — Sets gray value

ps_setlinecap — Sets appearance of line ends

ps_setlinejoin — Sets how contected lines are joined

ps_setlinewidth — Sets width of a line

ps_setmiterlimit — Sets the miter limit

ps_setoverprintmode — Sets overprint mode

ps_setpolydash — Sets appearance of a dashed line

ps_shading_pattern — Creates a pattern based on a shading

ps_shading — Creates a shading for later use

ps_shfill — Fills an area with a shading

ps_show_boxed — Output text in a box

ps_show_xy2 — Output text at position

ps_show_xy — Output text at given position

ps_show2 — Output a text at current position

ps_show — Output text

ps_string_geometry — Gets geometry of a string

ps_stringwidth — Gets width of a string

ps_stroke — Draws the current path

ps_symbol_name — Gets name of a glyph

ps_symbol_width — Gets width of a glyph

ps_symbol — Output a glyph

ps_translate — Sets translation

CXXXII. Pspell

pspell_add_to_personal — Add the word to a personal wordlist

pspell_add_to_session — Add the word to the wordlist in the current session

pspell_check — Check a word

pspell_clear_session — Clear the current session

pspell_config_create — Create a config used to open a dictionary

pspell_config_data_dir — location of language data files

pspell_config_dict_dir — Location of the main word list

pspell_config_ignore — Ignore words less than N characters long

pspell_config_mode — Change the mode number of suggestions returned

pspell_config_personal — Set a file that contains personal wordlist

pspell_config_repl — Set a file that contains replacement pairs

pspell_config_runtogether — Consider run-together words as valid compounds

pspell_config_save_repl — Determine whether to save a replacement pairs list along with the wordlist

pspell_new_config — Load a new dictionary with settings based on a given config

pspell_new_personal — Load a new dictionary with personal wordlist

pspell_new — Load a new dictionary

pspell_save_wordlist — Save the personal wordlist to a file

pspell_store_replacement — Store a replacement pair for a word

pspell_suggest — Suggest spellings of a word

CXXXIII. qtdom

qdom_error — Returns the error string from the last QDOM operation or FALSE if no errors occurred

qdom_tree — Creates a tree of an XML string

CXXXIV. radius

radius_acct_open — Creates a Radius handle for accounting

radius_add_server — Adds a server

radius_auth_open — Creates a Radius handle for authentication

radius_close — Frees all ressources

radius_config — Causes the library to read the given configuration file

radius_create_request — Create accounting or authentication request

radius_cvt_addr — Converts raw data to IP-Address

radius_cvt_int — Converts raw data to integer

radius_cvt_string — Converts raw data to string

radius_demangle_mppe_key — Derives mppe-keys from mangled data

radius_demangle — Demangles data

radius_get_attr — Extracts an attribute

radius_get_vendor_attr — Extracts a vendor specific attribute

radius_put_addr — Attaches an IP-Address attribute

radius_put_attr — Attaches a binary attribute

radius_put_int — Attaches an integer attribute

radius_put_string — Attaches a string attribute

radius_put_vendor_addr — Attaches a vendor specific IP-Address attribute

radius_put_vendor_attr — Attaches a vendor specific binary attribute

radius_put_vendor_int — Attaches a vendor specific integer attribute

radius_put_vendor_string — Attaches a vendor specific string attribute

radius_request_authenticator — Returns the request authenticator

radius_send_request — Sends the request and waites for a reply

radius_server_secret — Returns the shared secret

radius_strerror — Returns an error message

CXXXV. Rar

rar_close — Close Rar archive and free all resources

rar_entry_get — Get entry object from the Rar archive

Rar::extract — Extract entry from the archive

Rar::getAttr — Get attributes of the entry

Rar::getCrc — Get CRC of the entry

Rar::getFileTime — Get entry last modification time

Rar::getHostOs — Get entry host OS

Rar::getMethod — Get pack method of the entry

Rar::getName — Get name of the entry

Rar::getPackedSize — Get packed size of the entry

Rar::getUnpackedSize — Get unpacked size of the entry

Rar::getVersion — Get version of the archiver used to add the entry

rar_list — Get entries list from the Rar archive

rar_open — Open Rar archive

CXXXVI. Readline

readline_add_history — Adds a line to the history

readline_callback_handler_install — Initializes the readline callback interface and terminal, prints the prompt and returns immediately

readline_callback_handler_remove — Removes a previously installed callback handler and restores terminal settings

readline_callback_read_char — Reads a character and informs the readline callback interface when a line is received

readline_clear_history — Clears the history

readline_completion_function — Registers a completion function

readline_info — Gets/sets various internal readline variables

readline_list_history — Lists the history

readline_on_new_line — Inform readline that the cursor has moved to a new line

readline_read_history — Reads the history

readline_redisplay — Redraws the display

readline_write_history — Writes the history

readline — Reads a line

CXXXVII. Recode

recode_file — Recode from file to file according to recode request

recode_string — Recode a string according to a recode request

recode — Alias of recode_string()

CXXXVIII. RPMReader

rpm_close — Closes an RPM file

rpm_get_tag — Retrieves a header tag from an RPM file

rpm_is_valid — Tests a filename for validity as an RPM file

rpm_open — Opens an RPM file

rpm_version — Returns a string representing the current version of the rpmreader extension

CXXXIX. runkit

Runkit_Sandbox — Runkit Sandbox Class -- PHP Virtual Machine

Runkit_Sandbox_Parent — Runkit Anti-Sandbox Class

runkit_class_adopt — Convert a base class to an inherited class, add ancestral methods when appropriate

runkit_class_emancipate — Convert an inherited class to a base class, removes any method whose scope is ancestral

runkit_constant_add — Similar to define(), but allows defining in class definitions as well

runkit_constant_redefine — Redefine an already defined constant

runkit_constant_remove — Remove/Delete an already defined constant

runkit_function_add — Add a new function, similar to create_function()

runkit_function_copy — Copy a function to a new function name

runkit_function_redefine — Replace a function definition with a new implementation

runkit_function_remove — Remove a function definition

runkit_function_rename — Change a function's name

runkit_import — Process a PHP file importing function and class definitions, overwriting where appropriate

runkit_lint_file — Check the PHP syntax of the specified file

runkit_lint — Check the PHP syntax of the specified php code

runkit_method_add — Dynamically adds a new method to a given class

runkit_method_copy — Copies a method from class to another

runkit_method_redefine — Dynamically changes the code of the given method

runkit_method_remove — Dynamically removes the given method

runkit_method_rename — Dynamically changes the name of the given method

runkit_return_value_used — Determines if the current functions return value will be used

runkit_sandbox_output_handler — Specify a function to capture and/or process output from a runkit sandbox

runkit_superglobals — Return numerically indexed array of registered superglobals

CXL. SAM

SAMConnection->commit() — Commits (completes) the current unit of work.

SAMConnection->connect() — Establishes a connection to a Messaging Server

SAMConnection->__construct() — Creates a new connection to a Messaging Server

SAMConnection->disconnect() — Disconnects from a Messaging Server

SAMConnection->errno — Contains the unique numeric error code of the last executed SAM operation.

SAMConnection->error — Contains the text description of the last failed SAM operation.

SAMConnection->isConnected() — Queries whether a connection is established to a Messaging Server

SAMConnection->peek() — Read a message from a queue without removing it from the queue.

SAMConnection->peekAll() — Read one or more messages from a queue without removing it from the queue.

SAMConnection->receive() — Receive a message from a queue or subscription.

SAMConnection->remove() — Remove a message from a queue.

SAMConnection->rollback() — Cancels (rolls back) an in-flight unit of work.

SAMConnection->send() — Send a message to a queue or publish an item to a topic.

SAMConnection::setDebug() — Turn on or off additional debugging output.

SAMConnection->subscribe() — Create a subscription to a specified topic.

SAMConnection->unsubscribe() — Cancel a subscription to a specified topic.

SAMMessage->body — The body of the message.

SAMMessage->__construct() — Creates a new Message object

SAMMessage->header — The header properties of the message.

CXLI. Satellite

OrbitEnum — Use CORBA enums

OrbitObject — Access CORBA objects

OrbitStruct — Use CORBA structs

satellite_caught_exception — See if an exception was caught from the previous function

satellite_exception_id — Get the repository id for the latest exception.

satellite_exception_value — Get the exception struct for the latest exception

satellite_get_repository_id — NOT IMPLEMENTED

satellite_load_idl — Instruct the type manager to load an IDL file

satellite_object_to_string — Convert an object to its string representation

CXLII. SCA

SCA_LocalProxy::createDataObject — create an SDO

SCA_SoapProxy::createDataObject — create an SDO

SCA::createDataObject — create an SDO

SCA::getService — Obtain a proxy for a service

CXLIII. SDO

SDO_DAS_ChangeSummary::beginLogging — Begin change logging

SDO_DAS_ChangeSummary::endLogging — End change logging

SDO_DAS_ChangeSummary::getChangeType — Get the type of change made to an SDO_DataObject

SDO_DAS_ChangeSummary::getChangedDataObjects — Get the changed data objects from a change summary

SDO_DAS_ChangeSummary::getOldContainer — Get the old container for a deleted SDO_DataObject

SDO_DAS_ChangeSummary::getOldValues — Get the old values for a given changed SDO_DataObject

SDO_DAS_ChangeSummary::isLogging — Test to see whether change logging is switched on

SDO_DAS_DataFactory::addPropertyToType — Adds a property to a type

SDO_DAS_DataFactory::addType — Add a new type to a model

SDO_DAS_DataFactory::getDataFactory — Get a data factory instance

SDO_DAS_DataObject::getChangeSummary — Get a data object's change summary

SDO_DAS_Setting::getListIndex — Get the list index for a changed many-valued property

SDO_DAS_Setting::getPropertyIndex — Get the property index for a changed property

SDO_DAS_Setting::getPropertyName — Get the property name for a changed property

SDO_DAS_Setting::getValue — Get the old value for the changed property

SDO_DAS_Setting::isSet — Test whether a property was set prior to being modified

SDO_DataFactory::create — Create an SDO_DataObject

SDO_DataObject::clear — Clear an SDO_DataObject's properties

SDO_DataObject::createDataObject — Create a child SDO_DataObject

SDO_DataObject::getContainer — Get a data object's container

SDO_DataObject::getSequence — Get the sequence for a data object

SDO_DataObject::getTypeName — Return the name of the type for a data object.

SDO_DataObject::getTypeNamespaceURI — Return the namespace URI of the type for a data object.

SDO_Exception::getCause — Get the cause of the exception.

SDO_List::insert — Insert into a list

SDO_Model_Property::getContainingType — Get the SDO_Model_Type which contains this property

SDO_Model_Property::getDefault — Get the default value for the property

SDO_Model_Property::getName — Get the name of the SDO_Model_Property

SDO_Model_Property::getType — Get the SDO_Model_Type of the property

SDO_Model_Property::isContainment — Test to see if the property defines a containment relationship

SDO_Model_Property::isMany — Test to see if the property is many-valued

SDO_Model_ReflectionDataObject::__construct — Construct an SDO_Model_ReflectionDataObject

SDO_Model_ReflectionDataObject::export — Get a string describing the SDO_DataObject.

SDO_Model_ReflectionDataObject::getContainmentProperty — Get the property which defines the containment relationship to the data object

SDO_Model_ReflectionDataObject::getInstanceProperties — Get the instance properties of the SDO_DataObject

SDO_Model_ReflectionDataObject::getType — Get the SDO_Model_Type for the SDO_DataObject

SDO_Model_Type::getBaseType — Get the base type for this type

SDO_Model_Type::getName — Get the name of the type

SDO_Model_Type::getNamespaceURI — Get the namespace URI of the type

SDO_Model_Type::getProperties — Get the SDO_Model_Property objects defined for the type

SDO_Model_Type::getProperty — Get an SDO_Model_Property of the type

SDO_Model_Type::isAbstractType — Test to see if this SDO_Model_Type is an abstract data type

SDO_Model_Type::isDataType — Test to see if this SDO_Model_Type is a primitive data type

SDO_Model_Type::isInstance — Test for an SDO_DataObject being an instance of this SDO_Model_Type

SDO_Model_Type::isOpenType — Test to see if this type is an open type

SDO_Model_Type::isSequencedType — Test to see if this is a sequenced type

SDO_Sequence::getProperty — Return the property for the specified sequence index.

SDO_Sequence::insert — Insert into a sequence

SDO_Sequence::move — Move an item to another sequence position

CXLIV. SDO DAS XML

SDO_DAS_XML_Document::getRootDataObject — Returns the root SDO_DataObject

SDO_DAS_XML_Document::getRootElementName — Returns root element's name

SDO_DAS_XML_Document::getRootElementURI — Returns root element's URI string

SDO_DAS_XML_Document::setEncoding — Sets the given string as encoding

SDO_DAS_XML_Document::setXMLDeclaration — Sets the xml declaration

SDO_DAS_XML_Document::setXMLVersion — Sets the given string as xml version

SDO_DAS_XML::addTypes — To load a second or subsequent schema file to a SDO_DAS_XML object

SDO_DAS_XML::create — To create SDO_DAS_XML object for a given schema file

SDO_DAS_XML::createDataObject — Creates SDO_DataObject for a given namespace URI and type name

SDO_DAS_XML::createDocument — Creates an XML Document object from scratch, without the need to load a document from a file or string.

SDO_DAS_XML::loadFile — Returns SDO_DAS_XML_Document object for a given path to xml instance document

SDO_DAS_XML::loadString — Returns SDO_DAS_XML_Document for a given xml instance string

SDO_DAS_XML::saveFile — Saves the SDO_DAS_XML_Document object to a file

SDO_DAS_XML::saveString — Saves the SDO_DAS_XML_Document object to a string

CXLV. SDO-DAS-Relational

SDO_DAS_Relational::applyChanges — Applies the changes made to a data graph back to the database.

SDO_DAS_Relational::__construct — Creates an instance of a Relational Data Access Service

SDO_DAS_Relational::createRootDataObject — Returns the special root object in an otherwise empty data graph. Used when creating a data graph from scratch.

SDO_DAS_Relational::executePreparedQuery — Executes an SQL query passed as a prepared statement, with a list of values to substitute for placeholders, and return the results as a normalised data graph.

SDO_DAS_Relational::executeQuery — Executes a given SQL query against a relational database and returns the results as a normalised data graph.

CXLVI. Semaphore

ftok — Convert a pathname and a project identifier to a System V IPC key

msg_get_queue — Create or attach to a message queue

msg_receive — Receive a message from a message queue

msg_remove_queue — Destroy a message queue

msg_send — Send a message to a message queue

msg_set_queue — Set information in the message queue data structure

msg_stat_queue — Returns information from the message queue data structure

sem_acquire — Acquire a semaphore

sem_get — Get a semaphore id

sem_release — Release a semaphore

sem_remove — Remove a semaphore

shm_attach — Creates or open a shared memory segment

shm_detach — Disconnects from shared memory segment

shm_get_var — Returns a variable from shared memory

shm_put_var — Inserts or updates a variable in shared memory

shm_remove_var — Removes a variable from shared memory

shm_remove — Removes shared memory from Unix systems

CXLVII. SESAM

sesam_affected_rows — Get number of rows affected by an immediate query

sesam_commit — Commit pending updates to the SESAM database

sesam_connect — Open SESAM database connection

sesam_diagnostic — Return status information for last SESAM call

sesam_disconnect — Detach from SESAM connection

sesam_errormsg — Returns error message of last SESAM call

sesam_execimm — Execute an "immediate" SQL-statement

sesam_fetch_array — Fetch one row as an associative array

sesam_fetch_result — Return all or part of a query result

sesam_fetch_row — Fetch one row as an array

sesam_field_array — Return meta information about individual columns in a result

sesam_field_name — Return one column name of the result set

sesam_free_result — Releases resources for the query

sesam_num_fields — Return the number of fields/columns in a result set

sesam_query — Perform a SESAM SQL query and prepare the result

sesam_rollback — Discard any pending updates to the SESAM database

sesam_seek_row — Set scrollable cursor mode for subsequent fetches

sesam_settransaction — Set SESAM transaction parameters

CXLVIII. Session PgSQL

session_pgsql_add_error — Increments error counts and sets last error message

session_pgsql_get_error — Returns number of errors and last error message

session_pgsql_get_field — Get custom field value

session_pgsql_reset — Reset connection to session database servers

session_pgsql_set_field — Set custom field value

session_pgsql_status — Get current save handler status

CXLIX. Sessions

session_cache_expire — Return current cache expire

session_cache_limiter — Get and/or set the current cache limiter

session_commit — Alias of session_write_close()

session_decode — Decodes session data from a string

session_destroy — Destroys all data registered to a session

session_encode — Encodes the current session data as a string

session_get_cookie_params — Get the session cookie parameters

session_id — Get and/or set the current session id

session_is_registered — Find out whether a global variable is registered in a session

session_module_name — Get and/or set the current session module

session_name — Get and/or set the current session name

session_regenerate_id — Update the current session id with a newly generated one

session_register — Register one or more global variables with the current session

session_save_path — Get and/or set the current session save path

session_set_cookie_params — Set the session cookie parameters

session_set_save_handler — Sets user-level session storage functions

session_start — Initialize session data

session_unregister — Unregister a global variable from the current session

session_unset — Free all session variables

session_write_close — Write session data and end session

CL. shmop

shmop_close — Close shared memory block

shmop_delete — Delete shared memory block

shmop_open — Create or open shared memory block

shmop_read — Read data from shared memory block

shmop_size — Get size of shared memory block

shmop_write — Write data into shared memory block

CLI. SimpleXML

SimpleXMLElement->addAttribute() — Adds an attribute to the SimpleXML element

SimpleXMLElement->addChild() — Adds a child element to the XML node

SimpleXMLElement->asXML() — Return a well-formed XML string based on SimpleXML element

SimpleXMLElement->attributes() — Identifies an element's attributes

SimpleXMLElement->children() — Finds children of given node

SimpleXMLElement->__construct() — Creates a new SimpleXMLElement object

SimpleXMLElement->getDocNamespaces() — Returns namespaces declared in document

SimpleXMLElement->getName() — Gets the name of the XML element

SimpleXMLElement->getNamespaces() — Returns namespaces used in document

SimpleXMLElement->registerXPathNamespace() — Creates a prefix/ns context for the next XPath query

SimpleXMLElement->xpath() — Runs XPath query on XML data

simplexml_import_dom — Get a SimpleXMLElement object from a DOM node.

simplexml_load_file — Interprets an XML file into an object

simplexml_load_string — Interprets a string of XML into an object

CLII. SNMP

snmp_get_quick_print — Fetches the current value of the UCD library's quick_print setting

snmp_get_valueretrieval — Return the method how the SNMP values will be returned

snmp_read_mib — Reads and parses a MIB file into the active MIB tree

snmp_set_enum_print — Return all values that are enums with their enum value instead of the raw integer

snmp_set_oid_numeric_print — Return all objects including their respective object id within the specified one

snmp_set_oid_output_format — Set the OID output format

snmp_set_quick_print — Set the value of quick_print within the UCD SNMP library

snmp_set_valueretrieval — Specify the method how the SNMP values will be returned

snmpget — Fetch an SNMP object

snmpgetnext — Fetch a SNMP object

snmprealwalk — Return all objects including their respective object ID within the specified one

snmpset — Set an SNMP object

snmpwalk — Fetch all the SNMP objects from an agent

snmpwalkoid — Query for a tree of information about a network entity

CLIII. SOAP

is_soap_fault — Checks if SOAP call was failed

SoapClient->__call() — Calls a SOAP function (deprecated)

SoapClient->__construct() — SoapClient constructor

SoapClient->__doRequest() — Performs a SOAP request

SoapClient->__getFunctions() — Returns list of SOAP functions

SoapClient->__getLastRequest() — Returns last SOAP request

SoapClient->__getLastRequestHeaders() — Returns last SOAP request headers

SoapClient->__getLastResponse() — Returns last SOAP response.

SoapClient->__getLastResponseHeaders() — Returns last SOAP response headers.

SoapClient->__getTypes() — Returns list of SOAP types

SoapClient->__setCookie() — Sets the cookie that will be sent with the SOAP request

SoapClient->__soapCall() — Calls a SOAP function

SoapFault->__construct() — SoapFault constructor

SoapHeader->__construct() — SoapHeader constructor

SoapParam->__construct() — SoapParam constructor

SoapServer->addFunction() — Adds one or several functions those will handle SOAP requests

SoapServer->__construct() — SoapServer constructor

SoapServer->fault() — Issue SoapServer fault indicating an error

SoapServer->getFunctions() — Returns list of defined functions

SoapServer->handle() — Handles a SOAP request

SoapServer->setClass() — Sets class which will handle SOAP requests

SoapServer->setPersistence() — Sets persistence mode of SoapServer

SoapVar->__construct() — SoapVar constructor

use_soap_error_handler — Set whether to use the SOAP error handler and return the former value

CLIV. Sockets

socket_accept — Accepts a connection on a socket

socket_bind — Binds a name to a socket

socket_clear_error — Clears the error on the socket or the last error code

socket_close — Closes a socket resource

socket_connect — Initiates a connection on a socket

socket_create_listen — Opens a socket on port to accept connections

socket_create_pair — Creates a pair of indistinguishable sockets and stores them in an array

socket_create — Create a socket (endpoint for communication)

socket_get_option — Gets socket options for the socket

socket_getpeername — Queries the remote side of the given socket which may either result in host/port or in a Unix filesystem path, dependent on its type

socket_getsockname — Queries the local side of the given socket which may either result in host/port or in a Unix filesystem path, dependent on its type

socket_last_error — Returns the last error on the socket

socket_listen — Listens for a connection on a socket

socket_read — Reads a maximum of length bytes from a socket

socket_recv — Receives data from a connected socket

socket_recvfrom — Receives data from a socket whether or not it is connection-oriented

socket_select — Runs the select() system call on the given arrays of sockets with a specified timeout

socket_send — Sends data to a connected socket

socket_sendto — Sends a message to a socket, whether it is connected or not

socket_set_block — Sets blocking mode on a socket resource

socket_set_nonblock — Sets nonblocking mode for file descriptor fd

socket_set_option — Sets socket options for the socket

socket_shutdown — Shuts down a socket for receiving, sending, or both

socket_strerror — Return a string describing a socket error

socket_write — Write to a socket

CLV. spl

ArrayIterator::current — Return current array entry

ArrayIterator::key — Return current array key

ArrayIterator::next — Move to next entry

ArrayIterator::rewind — Rewind array back to the start

ArrayIterator::seek — Seek to position

ArrayIterator::valid — Check whether array contains more entries

ArrayObject::append — Appends the value

ArrayObject::__construct — Construct a new array object

ArrayObject::count — Return the number of elements in the Iterator

ArrayObject::getIterator — Create a new iterator from an ArrayObject instance

ArrayObject::offsetExists — Returns whether the requested $index exists

ArrayObject::offsetGet — Returns the value at the specified $index

ArrayObject::offsetSet — Sets the value at the specified $index to $newval

ArrayObject::offsetUnset — Unsets the value at the specified $index

CachingIterator::hasNext — Check whether the inner iterator has a valid next element

CachingIterator::next — Move the iterator forward

CachingIterator::rewind — Rewind the iterator

CachingIterator::__toString — Return the string representation of the current element

CachingIterator::valid — Check whether the current element is valid

CachingRecursiveIterator::getChildren — Return the inner iterator's children as a CachingRecursiveIterator

CachingRecursiveIterator::hasChildren — Check whether the current element of the inner iterator has children

DirectoryIterator::__construct — Constructs a new dir iterator from a path

DirectoryIterator::current — Return this (needed for Iterator interface)

DirectoryIterator::getATime — Get last access time of file

DirectoryIterator::getCTime — Get inode modification time of file

DirectoryIterator::getFilename — Return filename of current dir entry

DirectoryIterator::getGroup — Get file group

DirectoryIterator::getInode — Get file inode

DirectoryIterator::getMTime — Get last modification time of file

DirectoryIterator::getOwner — Get file owner

DirectoryIterator::getPath — Return directory path

DirectoryIterator::getPathname — Return path and filename of current dir entry

DirectoryIterator::getPerms — Get file permissions

DirectoryIterator::getSize — Get file size

DirectoryIterator::getType — Get file type

DirectoryIterator::isDir — Returns true if file is directory

DirectoryIterator::isDot — Returns true if current entry is '.' or '..'

DirectoryIterator::isExecutable — Returns true if file is executable

DirectoryIterator::isFile — Returns true if file is a regular file

DirectoryIterator::isLink — Returns true if file is symbolic link

DirectoryIterator::isReadable — Returns true if file can be read

DirectoryIterator::isWritable — Returns true if file can be written

DirectoryIterator::key — Return current dir entry

DirectoryIterator::next — Move to next entry

DirectoryIterator::rewind — Rewind dir back to the start

DirectoryIterator::valid — Check whether dir contains more entries

FilterIterator::current — Get the current element value

FilterIterator::getInnerIterator — Get the inner iterator

FilterIterator::key — Get the current key

FilterIterator::next — Move the iterator forward

FilterIterator::rewind — Rewind the iterator

FilterIterator::valid — Check whether the current element is valid

LimitIterator::getPosition — Return the current position

LimitIterator::next — Move the iterator forward

LimitIterator::rewind — Rewind the iterator to the specified starting offset

LimitIterator::seek — Seek to the given position

LimitIterator::valid — Check whether the current element is valid

ParentIterator::getChildren — Return the inner iterator's children contained in a ParentIterator

ParentIterator::hasChildren — Check whether the inner iterator's current element has children

ParentIterator::next — Move the iterator forward

ParentIterator::rewind — Rewind the iterator

RecursiveDirectoryIterator::getChildren — Returns an iterator for the current entry if it is a directory

RecursiveDirectoryIterator::hasChildren — Returns whether current entry is a directory and not '.' or '..'

RecursiveDirectoryIterator::key — Return path and filename of current dir entry

RecursiveDirectoryIterator::next — Move to next entry

RecursiveDirectoryIterator::rewind — Rewind dir back to the start

RecursiveIteratorIterator::current — Access the current element value

RecursiveIteratorIterator::getDepth — Get the current depth of the recursive iteration

RecursiveIteratorIterator::getSubIterator — The current active sub iterator

RecursiveIteratorIterator::key — Access the current key

RecursiveIteratorIterator::next — Move forward to the next element

RecursiveIteratorIterator::rewind — Rewind the iterator to the first element of the top level inner iterator

RecursiveIteratorIterator::valid — Check whether the current position is valid

SimpleXMLIterator::current — Return current SimpleXML entry

SimpleXMLIterator::getChildren — Returns an iterator for the current entry if it is a SimpleXML object

SimpleXMLIterator::hasChildren — Returns whether current entry is a SimpleXML object

SimpleXMLIterator::key — Return current SimpleXML key

SimpleXMLIterator::next — Move to next entry

SimpleXMLIterator::rewind — Rewind SimpleXML back to the start

SimpleXMLIterator::valid — Check whether SimpleXML contains more entries

class_implements — Return the interfaces which are implemented by the given class

class_parents — Return the parent classes of the given class

iterator_count — Count the elements in an iterator

iterator_to_array — Copy the iterator into an array

spl_autoload_call — Try all registered __autoload() function to load the requested class

spl_autoload_extensions — Register and return default file extensions for spl_autoload

spl_autoload_functions — Return all registered __autoload() functions

spl_autoload_register — Register given function as __autoload() implementation

spl_autoload_unregister — Unregister given function as __autoload() implementation

spl_autoload — Default implementation for __autoload()

spl_classes — Return available SPL classes

spl_object_hash — Return hash id for given object

CLVI. SQLite

sqlite_array_query — Execute a query against a given database and returns an array

sqlite_busy_timeout — Set busy timeout duration, or disable busy handlers

sqlite_changes — Returns the number of rows that were changed by the most recent SQL statement

sqlite_close — Closes an open SQLite database

sqlite_column — Fetches a column from the current row of a result set

sqlite_create_aggregate — Register an aggregating UDF for use in SQL statements

sqlite_create_function — Registers a "regular" User Defined Function for use in SQL statements

sqlite_current — Fetches the current row from a result set as an array

sqlite_error_string — Returns the textual description of an error code

sqlite_escape_string — Escapes a string for use as a query parameter

sqlite_exec — Executes a result-less query against a given database

sqlite_factory — Opens a SQLite database and returns a SQLiteDatabase object

sqlite_fetch_all — Fetches all rows from a result set as an array of arrays

sqlite_fetch_array — Fetches the next row from a result set as an array

sqlite_fetch_column_types — Return an array of column types from a particular table

sqlite_fetch_object — Fetches the next row from a result set as an object

sqlite_fetch_single — Fetches the first column of a result set as a string

sqlite_fetch_string — Alias of sqlite_fetch_single()

sqlite_field_name — Returns the name of a particular field

sqlite_has_more — Finds whether or not more rows are available

sqlite_has_prev — Returns whether or not a previous row is available

sqlite_key — Returns the current row index

sqlite_last_error — Returns the error code of the last error for a database

sqlite_last_insert_rowid — Returns the rowid of the most recently inserted row

sqlite_libencoding — Returns the encoding of the linked SQLite library

sqlite_libversion — Returns the version of the linked SQLite library

sqlite_next — Seek to the next row number

sqlite_num_fields — Returns the number of fields in a result set

sqlite_num_rows — Returns the number of rows in a buffered result set

sqlite_open — Opens a SQLite database and create the database if it does not exist

sqlite_popen — Opens a persistent handle to an SQLite database and create the database if it does not exist

sqlite_prev — Seek to the previous row number of a result set

sqlite_query — Executes a query against a given database and returns a result handle

sqlite_rewind — Seek to the first row number

sqlite_seek — Seek to a particular row number of a buffered result set

sqlite_single_query — Executes a query and returns either an array for one single column or the value of the first row

sqlite_udf_decode_binary — Decode binary data passed as parameters to an UDF

sqlite_udf_encode_binary — Encode binary data before returning it from an UDF

sqlite_unbuffered_query — Execute a query that does not prefetch and buffer all data

sqlite_valid — Returns whether more rows are available

CLVII. SQLite (PDO)

PDO_SQLITE DSN — Connecting to SQLite databases

PDO->sqliteCreateAggregate() — Registers an aggregating User Defined Function for use in SQL statements

PDO->sqliteCreateFunction() — Registers a User Defined Function for use in SQL statements

CLVIII. ssh2

ssh2_auth_hostbased_file — Authenticate using a public hostkey

ssh2_auth_none — Authenticate as "none"

ssh2_auth_password — Authenticate over SSH using a plain password

ssh2_auth_pubkey_file — Authenticate using a public key

ssh2_connect — Connect to an SSH server

ssh2_exec — Execute a command on a remote server

ssh2_fetch_stream — Fetch an extended data stream

ssh2_fingerprint — Retreive fingerprint of remote server

ssh2_methods_negotiated — Return list of negotiated methods

ssh2_publickey_add — Add an authorized publickey

ssh2_publickey_init — Initialize Publickey subsystem

ssh2_publickey_list — List currently authorized publickeys

ssh2_publickey_remove — Remove an authorized publickey

ssh2_scp_recv — Request a file via SCP

ssh2_scp_send — Send a file via SCP

ssh2_sftp_lstat — Stat a symbolic link

ssh2_sftp_mkdir — Create a directory

ssh2_sftp_readlink — Return the target of a symbolic link

ssh2_sftp_realpath — Resolve the realpath of a provided path string

ssh2_sftp_rename — Rename a remote file

ssh2_sftp_rmdir — Remove a directory

ssh2_sftp_stat — Stat a file on a remote filesystem

ssh2_sftp_symlink — Create a symlink

ssh2_sftp_unlink — Delete a file

ssh2_sftp — Initialize SFTP subsystem

ssh2_shell — Request an interactive shell

ssh2_tunnel — Open a tunnel through a remote server

CLIX. Statistics

stats_absolute_deviation — Returns the absolute deviation of an array of values

stats_cdf_beta — CDF function for BETA Distribution. Calculates any one parameter of the beta distribution given values for the others.

stats_cdf_binomial — Calculates any one parameter of the binomial distribution given values for the others.

stats_cdf_cauchy — Not documented

stats_cdf_chisquare — Calculates any one parameter of the chi-square distribution given values for the others.

stats_cdf_exponential — Not documented

stats_cdf_f — Calculates any one parameter of the F distribution given values for the others.

stats_cdf_gamma — Calculates any one parameter of the gamma distribution given values for the others.

stats_cdf_laplace — Not documented

stats_cdf_logistic — Not documented

stats_cdf_negative_binomial — Calculates any one parameter of the negative binomial distribution given values for the others.

stats_cdf_noncentral_chisquare — Calculates any one parameter of the non-central chi-square distribution given values for the others.

stats_cdf_noncentral_f — Calculates any one parameter of the Non-central F distribution given values for the others.

stats_cdf_poisson — Calculates any one parameter of the Poisson distribution given values for the others.

stats_cdf_t — Calculates any one parameter of the T distribution given values for the others.

stats_cdf_uniform — Not documented

stats_cdf_weibull — Not documented

stats_covariance — Computes the covariance of two data sets

stats_den_uniform — Not documented

stats_dens_beta — Not documented

stats_dens_cauchy — Not documented

stats_dens_chisquare — Not documented

stats_dens_exponential — Not documented

stats_dens_f

stats_dens_gamma — Not documented

stats_dens_laplace — Not documented

stats_dens_logistic — Not documented

stats_dens_negative_binomial — Not documented

stats_dens_normal — Not documented

stats_dens_pmf_binomial — Not documented

stats_dens_pmf_hypergeometric

stats_dens_pmf_poisson — Not documented

stats_dens_t — Not documented

stats_dens_weibull — Not documented

stats_harmonic_mean — Returns the harmonic mean of an array of values

stats_kurtosis — Computes the kurtosis of the data in the array

stats_rand_gen_beta — Generates beta random deviate

stats_rand_gen_chisquare — Generates random deviate from the distribution of a chisquare with "df" degrees of freedom random variable.

stats_rand_gen_exponential — Generates a single random deviate from an exponential distribution with mean "av"

stats_rand_gen_f — Generates a random deviate

stats_rand_gen_funiform — Generates uniform float between low (exclusive) and high (exclusive)

stats_rand_gen_gamma — Generates random deviates from a gamma distribution

stats_rand_gen_ibinomial_negative — Generates a single random deviate from a negative binomial distribution. Arguments : n - the number of trials in the negative binomial distribution from which a random deviate is to be generated (n > 0), p - the probability of an event (0 < p < 1)).

stats_rand_gen_ibinomial — Generates a single random deviate from a binomial distribution whose number of trials is "n" (n >= 0) and whose probability of an event in each trial is "pp" ([0;1]). Method : algorithm BTPE

stats_rand_gen_int — Generates random integer between 1 and 2147483562

stats_rand_gen_ipoisson — Generates a single random deviate from a Poisson distribution with mean "mu" (mu >= 0.0).

stats_rand_gen_iuniform — Generates integer uniformly distributed between LOW (inclusive) and HIGH (inclusive)

stats_rand_gen_noncenral_chisquare — Generates random deviate from the distribution of a noncentral chisquare with "df" degrees of freedom and noncentrality parameter "xnonc". d must be >= 1.0, xnonc must >= 0.0

stats_rand_gen_noncentral_f — Generates a random deviate from the noncentral F (variance ratio) distribution with "dfn" degrees of freedom in the numerator, and "dfd" degrees of freedom in the denominator, and noncentrality parameter "xnonc". Method : directly generates ratio of noncentral numerator chisquare variate to central denominator chisquare variate.

stats_rand_gen_noncentral_t — Generates a single random deviate from a noncentral T distribution

stats_rand_gen_normal — Generates a single random deviate from a normal distribution with mean, av, and standard deviation, sd (sd >= 0). Method : Renames SNORM from TOMS as slightly modified by BWB to use RANF instead of SUNIF.

stats_rand_gen_t — Generates a single random deviate from a T distribution

stats_rand_get_seeds — Not documented

stats_rand_phrase_to_seeds — generate two seeds for the RGN random number generator

stats_rand_ranf — Returns a random floating point number from a uniform distribution over 0 - 1 (endpoints of this interval are not returned) using the current generator

stats_rand_setall — Not documented

stats_skew — Computes the skewness of the data in the array

stats_standard_deviation — Returns the standard deviation

stats_stat_binomial_coef — Not documented

stats_stat_correlation — Not documented

stats_stat_gennch — Not documented

stats_stat_independent_t — Not documented

stats_stat_innerproduct

stats_stat_noncentral_t — Calculates any one parameter of the noncentral t distribution give values for the others.

stats_stat_paired_t — Not documented

stats_stat_percentile — Not documented

stats_stat_powersum — Not documented

stats_variance — Returns the population variance

CLX. Streams

stream_bucket_append — Append bucket to brigade

stream_bucket_make_writeable — Return a bucket object from the brigade for operating on

stream_bucket_new — Create a new bucket for use on the current stream

stream_bucket_prepend — Prepend bucket to brigade

stream_context_create — Create a streams context

stream_context_get_default — Retreive the default streams context

stream_context_get_options — Retrieve options for a stream/wrapper/context

stream_context_set_option — Sets an option for a stream/wrapper/context

stream_context_set_params — Set parameters for a stream/wrapper/context

stream_copy_to_stream — Copies data from one stream to another

stream_encoding — Set character set for stream encoding

stream_filter_append — Attach a filter to a stream

stream_filter_prepend — Attach a filter to a stream

stream_filter_register — Register a stream filter implemented as a PHP class derived from php_user_filter

stream_filter_remove — Remove a filter from a stream

stream_get_contents — Reads remainder of a stream into a string

stream_get_filters — Retrieve list of registered filters

stream_get_line — Gets line from stream resource up to a given delimiter

stream_get_meta_data — Retrieves header/meta data from streams/file pointers

stream_get_transports — Retrieve list of registered socket transports

stream_get_wrappers — Retrieve list of registered streams

stream_register_wrapper — Alias of stream_wrapper_register()

stream_resolve_include_path — Determine what file will be opened by calls to fopen() with a relative path

stream_select — Runs the equivalent of the select() system call on the given arrays of streams with a timeout specified by tv_sec and tv_usec

stream_set_blocking — Set blocking/non-blocking mode on a stream

stream_set_timeout — Set timeout period on a stream

stream_set_write_buffer — Sets file buffering on the given stream

stream_socket_accept — Accept a connection on a socket created by stream_socket_server()

stream_socket_client — Open Internet or Unix domain socket connection

stream_socket_enable_crypto — Turns encryption on/off on an already connected socket

stream_socket_get_name — Retrieve the name of the local or remote sockets

stream_socket_pair — Creates a pair of connected, indistinguishable socket streams

stream_socket_recvfrom — Receives data from a socket, connected or not

stream_socket_sendto — Sends a message to a socket, whether it is connected or not

stream_socket_server — Create an Internet or Unix domain server socket

stream_socket_shutdown — Shutdown a full-duplex connection

stream_wrapper_register — Register a URL wrapper implemented as a PHP class

stream_wrapper_restore — Restores a previously unregistered built-in wrapper

stream_wrapper_unregister — Unregister a URL wrapper

CLXI. Strings

addcslashes — Quote string with slashes in a C style

addslashes — Quote string with slashes

bin2hex — Convert binary data into hexadecimal representation

chop — Alias of rtrim()

chr — Return a specific character

chunk_split — Split a string into smaller chunks

convert_cyr_string — Convert from one Cyrillic character set to another

convert_uudecode — Decode a uuencoded string

convert_uuencode — Uuencode a string

count_chars — Return information about characters used in a string

crc32 — Calculates the crc32 polynomial of a string

crypt — One-way string encryption (hashing)

echo — Output one or more strings

explode — Split a string by string

fprintf — Write a formatted string to a stream

get_html_translation_table — Returns the translation table used by htmlspecialchars() and htmlentities()

hebrev — Convert logical Hebrew text to visual text

hebrevc — Convert logical Hebrew text to visual text with newline conversion

html_entity_decode — Convert all HTML entities to their applicable characters

htmlentities — Convert all applicable characters to HTML entities

htmlspecialchars_decode — Convert special HTML entities back to characters

htmlspecialchars — Convert special characters to HTML entities

implode — Join array elements with a string

join — Alias of implode()

levenshtein — Calculate Levenshtein distance between two strings

localeconv — Get numeric formatting information

ltrim — Strip whitespace (or other characters) from the beginning of a string

md5_file — Calculates the md5 hash of a given file

md5 — Calculate the md5 hash of a string

metaphone — Calculate the metaphone key of a string

money_format — Formats a number as a currency string

nl_langinfo — Query language and locale information

nl2br — Inserts HTML line breaks before all newlines in a string

number_format — Format a number with grouped thousands

ord — Return ASCII value of character

parse_str — Parses the string into variables

print — Output a string

printf — Output a formatted string

quoted_printable_decode — Convert a quoted-printable string to an 8 bit string

quotemeta — Quote meta characters

rtrim — Strip whitespace (or other characters) from the end of a string

setlocale — Set locale information

sha1_file — Calculate the sha1 hash of a file

sha1 — Calculate the sha1 hash of a string

similar_text — Calculate the similarity between two strings

soundex — Calculate the soundex key of a string

sprintf — Return a formatted string

sscanf — Parses input from a string according to a format

str_getcsv — Parse a CSV string into an array

str_ireplace — Case-insensitive version of str_replace().

str_pad — Pad a string to a certain length with another string

str_repeat — Repeat a string

str_replace — Replace all occurrences of the search string with the replacement string

str_rot13 — Perform the rot13 transform on a string

str_shuffle — Randomly shuffles a string

str_split — Convert a string to an array

str_word_count — Return information about words used in a string

strcasecmp — Binary safe case-insensitive string comparison

strchr — Alias of strstr()

strcmp — Binary safe string comparison

strcoll — Locale based string comparison

strcspn — Find length of initial segment not matching mask

strip_tags — Strip HTML and PHP tags from a string

stripcslashes — Un-quote string quoted with addcslashes()

stripos — Find position of first occurrence of a case-insensitive string

stripslashes — Un-quote string quoted with addslashes()

stristr — Case-insensitive strstr()

strlen — Get string length

strnatcasecmp — Case insensitive string comparisons using a "natural order" algorithm

strnatcmp — String comparisons using a "natural order" algorithm

strncasecmp — Binary safe case-insensitive string comparison of the first n characters

strncmp — Binary safe string comparison of the first n characters

strpbrk — Search a string for any of a set of characters

strpos — Find position of first occurrence of a string

strrchr — Find the last occurrence of a character in a string

strrev — Reverse a string

strripos — Find position of last occurrence of a case-insensitive string in a string

strrpos — Find position of last occurrence of a char in a string

strspn — Find length of initial segment matching mask

strstr — Find first occurrence of a string

strtok — Tokenize string

strtolower — Make a string lowercase

strtoupper — Make a string uppercase

strtr — Translate certain characters

substr_compare — Binary safe comparison of 2 strings from an offset, up to length characters

substr_count — Count the number of substring occurrences

substr_replace — Replace text within a portion of a string

substr — Return part of a string

trim — Strip whitespace (or other characters) from the beginning and end of a string

ucfirst — Make a string's first character uppercase

ucwords — Uppercase the first character of each word in a string

vfprintf — Write a formatted string to a stream

vprintf — Output a formatted string

vsprintf — Return a formatted string

wordwrap — Wraps a string to a given number of characters

CLXII. SVN

svn_add — Schedules the addition of an item in a working directory

svn_auth_get_parameter — Retrieves authentication parameter

svn_auth_set_parameter — Sets an authentication parameter

svn_cat — Returns the contents of a file in a repository

svn_checkout — Checks out a working copy from the repository

svn_cleanup — Recursively cleanup a working copy directory, finishing incomplete operations and removing locks

svn_client_version — Returns the version of the SVN client libraries

svn_commit — Sends changes from the local working copy to the repository

svn_diff — Recursively diffs two paths

svn_fs_abort_txn — Abort a transaction, returns true if everything is ok, false othewise

svn_fs_apply_text — Creates and returns a stream that will be used to replace

svn_fs_begin_txn2 — Create a new transaction

svn_fs_change_node_prop — Return true if everything is ok, false otherwise

svn_fs_check_path — Determines what kind of item lives at path in a given repository fsroot

svn_fs_contents_changed — Return true if content is different, false otherwise

svn_fs_copy — Copies a file or a directory, returns true if all is ok, false otherwise

svn_fs_delete — Deletes a file or a directory, return true if all is ok, false otherwise

svn_fs_dir_entries — Enumerates the directory entries under path; returns a hash of dir names to file type

svn_fs_file_contents — Returns a stream to access the contents of a file from a given version of the fs

svn_fs_file_length — Returns the length of a file from a given version of the fs

svn_fs_is_dir — Return true if the path points to a directory, false otherwise

svn_fs_is_file — Return true if the path points to a file, false otherwise

svn_fs_make_dir — Creates a new empty directory, returns true if all is ok, false otherwise

svn_fs_make_file — Creates a new empty file, returns true if all is ok, false otherwise

svn_fs_node_created_rev — Returns the revision in which path under fsroot was created

svn_fs_node_prop — Returns the value of a property for a node

svn_fs_props_changed — Return true if props are different, false otherwise

svn_fs_revision_prop — Fetches the value of a named property

svn_fs_revision_root — Get a handle on a specific version of the repository root

svn_fs_txn_root — Creates and returns a transaction root

svn_fs_youngest_rev — Returns the number of the youngest revision in the filesystem

svn_import — Imports an unversioned path into a repository

svn_log — Returns the commit log messages of a repository URL

svn_ls — Returns list of directory contents in repository URL, optionally at revision number

svn_repos_create — Create a new subversion repository at path

svn_repos_fs_begin_txn_for_commit — Create a new transaction

svn_repos_fs_commit_txn — Commits a transaction and returns the new revision

svn_repos_fs — Gets a handle on the filesystem for a repository

svn_repos_hotcopy — Make a hot-copy of the repos at repospath; copy it to destpath

svn_repos_open — Open a shared lock on a repository.

svn_repos_recover — Run recovery procedures on the repository located at path.

svn_status — Returns the status of working copy files and directories

svn_update — Update working copy

CLXIII. SWF

swf_actiongeturl — Get a URL from a Shockwave Flash movie

swf_actiongotoframe — Play a frame and then stop

swf_actiongotolabel — Display a frame with the specified label

swf_actionnextframe — Go forward one frame

swf_actionplay — Start playing the flash movie from the current frame

swf_actionprevframe — Go backwards one frame

swf_actionsettarget — Set the context for actions

swf_actionstop — Stop playing the flash movie at the current frame

swf_actiontogglequality — Toggle between low and high quality

swf_actionwaitforframe — Skip actions if a frame has not been loaded

swf_addbuttonrecord — Controls location, appearance and active area of the current button

swf_addcolor — Set the global add color to the rgba value specified

swf_closefile — Close the current Shockwave Flash file

swf_definebitmap — Define a bitmap

swf_definefont — Defines a font

swf_defineline — Define a line

swf_definepoly — Define a polygon

swf_definerect — Define a rectangle

swf_definetext — Define a text string

swf_endbutton — End the definition of the current button

swf_enddoaction — End the current action

swf_endshape — Completes the definition of the current shape

swf_endsymbol — End the definition of a symbol

swf_fontsize — Change the font size

swf_fontslant — Set the font slant

swf_fonttracking — Set the current font tracking

swf_getbitmapinfo — Get information about a bitmap

swf_getfontinfo — Gets font information

swf_getframe — Get the frame number of the current frame

swf_labelframe — Label the current frame

swf_lookat — Define a viewing transformation

swf_modifyobject — Modify an object

swf_mulcolor — Sets the global multiply color to the rgba value specified

swf_nextid — Returns the next free object id

swf_oncondition — Describe a transition used to trigger an action list

swf_openfile — Open a new Shockwave Flash file

swf_ortho2 — Defines 2D orthographic mapping of user coordinates onto the current viewport

swf_ortho — Defines an orthographic mapping of user coordinates onto the current viewport

swf_perspective — Define a perspective projection transformation

swf_placeobject — Place an object onto the screen

swf_polarview — Define the viewer's position with polar coordinates

swf_popmatrix — Restore a previous transformation matrix

swf_posround — Enables or Disables the rounding of the translation when objects are placed or moved

swf_pushmatrix — Push the current transformation matrix back unto the stack

swf_removeobject — Remove an object

swf_rotate — Rotate the current transformation

swf_scale — Scale the current transformation

swf_setfont — Change the current font

swf_setframe — Switch to a specified frame

swf_shapearc — Draw a circular arc

swf_shapecurveto3 — Draw a cubic bezier curve

swf_shapecurveto — Draw a quadratic bezier curve between two points

swf_shapefillbitmapclip — Set current fill mode to clipped bitmap

swf_shapefillbitmaptile — Set current fill mode to tiled bitmap

swf_shapefilloff — Turns off filling

swf_shapefillsolid — Set the current fill style to the specified color

swf_shapelinesolid — Set the current line style

swf_shapelineto — Draw a line

swf_shapemoveto — Move the current position

swf_showframe — Display the current frame

swf_startbutton — Start the definition of a button

swf_startdoaction — Start a description of an action list for the current frame

swf_startshape — Start a complex shape

swf_startsymbol — Define a symbol

swf_textwidth — Get the width of a string

swf_translate — Translate the current transformations

swf_viewport — Select an area for future drawing

CLXIV. swish

Swish::__construct — Construct a Swish object

Swish->getMetaList — Get the list of meta entries for the index

Swish->getPropertyList — Get the list of properties for the index

Swish->prepare — Prepare a search query

Swish->query — Execute a query and return results object

SwishResult->getMetaList — Get a list of meta entries

SwishResult->stem — Stems the given word

SwishResults->getParsedWords — Get an array of parsed words

SwishResults->getRemovedStopwords — Get an array of stopwords removed from the query

SwishResults->nextResult — Get the next search result

SwishResults->seekResult — Set current seek pointer to the given position

SwishSearch->execute — Execute the search and get the results

SwishSearch->resetLimit — Reset the search limits

SwishSearch->setLimit — Set the search limits

SwishSearch->setPhraseDelimiter — Set the phrase delimiter

SwishSearch->setSort — Set the sort order

SwishSearch->setStructure — Set the structure flag in the search object

CLXV. Sybase

sybase_affected_rows — Gets number of affected rows in last query

sybase_close — Closes a Sybase connection

sybase_connect — Opens a Sybase server connection

sybase_data_seek — Moves internal row pointer

sybase_deadlock_retry_count — Sets the deadlock retry count

sybase_fetch_array — Fetch row as array

sybase_fetch_assoc — Fetch a result row as an associative array

sybase_fetch_field — Get field information from a result

sybase_fetch_object — Fetch a row as an object

sybase_fetch_row — Get a result row as an enumerated array

sybase_field_seek — Sets field offset

sybase_free_result — Frees result memory

sybase_get_last_message — Returns the last message from the server

sybase_min_client_severity — Sets minimum client severity

sybase_min_error_severity — Sets minimum error severity

sybase_min_message_severity — Sets minimum message severity

sybase_min_server_severity — Sets minimum server severity

sybase_num_fields — Gets the number of fields in a result set

sybase_num_rows — Get number of rows in a result set

sybase_pconnect — Open persistent Sybase connection

sybase_query — Sends a Sybase query

sybase_result — Get result data

sybase_select_db — Selects a Sybase database

sybase_set_message_handler — Sets the handler called when a server message is raised

sybase_unbuffered_query — Send a Sybase query and do not block

CLXVI. TCP Wrappers

tcpwrap_check — Performs a tcpwrap check

CLXVII. tidy

ob_tidyhandler — ob_start callback function to repair the buffer

tidy_access_count — Returns the Number of Tidy accessibility warnings encountered for specified document

tidy_clean_repair — Execute configured cleanup and repair operations on parsed markup

tidy_config_count — Returns the Number of Tidy configuration errors encountered for specified document

tidy::__construct — Constructs a new tidy object

tidy_diagnose — Run configured diagnostics on parsed and repaired markup

tidy_error_count — Returns the Number of Tidy errors encountered for specified document

tidy_get_body — Returns a tidyNode Object starting from the <body> tag of the tidy parse tree

tidy_get_config — Get current Tidy configuration

tidy_get_error_buffer — Return warnings and errors which occurred parsing the specified document

tidy_get_head — Returns a tidyNode Object starting from the <head> tag of the tidy parse tree

tidy_get_html_ver — Get the Detected HTML version for the specified document

tidy_get_html — Returns a tidyNode Object starting from the <html> tag of the tidy parse tree

tidy_get_opt_doc — Returns the documentation for the given option name

tidy_get_output — Return a string representing the parsed tidy markup

tidy_get_release — Get release date (version) for Tidy library

tidy_get_root — Returns a tidyNode object representing the root of the tidy parse tree

tidy_get_status — Get status of specified document

tidy_getopt — Returns the value of the specified configuration option for the tidy document

tidy_is_xhtml — Indicates if the document is a XHTML document

tidy_is_xml — Indicates if the document is a generic (non HTML/XHTML) XML document

tidy_load_config — Load an ASCII Tidy configuration file with the specified encoding

tidy_node->get_attr — Return the attribute with the provided attribute id

tidy_node->get_nodes — Return an array of nodes under this node with the specified id

tidy_node->next — Returns the next sibling to this node

tidy_node->prev — Returns the previous sibling to this node

tidy_parse_file — Parse markup in file or URI

tidy_parse_string — Parse a document stored in a string

tidy_repair_file — Repair a file and return it as a string

tidy_repair_string — Repair a string using an optionally provided configuration file

tidy_reset_config — Restore Tidy configuration to default values

tidy_save_config — Save current settings to named file

tidy_set_encoding — Set the input/output character encoding for parsing markup

tidy_setopt — Updates the configuration settings for the specified tidy document

tidy_warning_count — Returns the Number of Tidy warnings encountered for specified document

tidyNode->hasChildren — Returns true if this node has children

tidyNode->hasSiblings — Returns true if this node has siblings

tidyNode->isAsp — Returns true if this node is ASP

tidyNode->isComment — Returns true if this node represents a comment

tidyNode->isHtml — Returns true if this node is part of a HTML document

tidyNode->isJste — Returns true if this node is JSTE

tidyNode->isPhp — Returns true if this node is PHP

tidyNode->isText — Returns true if this node represents text (no markup)

tidyNode::getParent — returns the parent node of the current node

CLXVIII. Tokenizer

token_get_all — Split given source into PHP tokens

token_name — Get the symbolic name of a given PHP token

CLXIX. Unicode

unicode_decode — Convert a binary string into a Unicode string

unicode_encode — Convert a unicode string in any encoding

unicode_get_error_mode — Get the error mode for strings conversions

unicode_get_subst_char — Get the substitution character for string conversion errors

unicode_semantics — Check whether unicode semantics is enabled

unicode_set_error_mode — Set the error mode for strings conversions

unicode_set_subst_char — Set the substitution character for string conversion errors

CLXX. URLs

base64_decode — Decodes data encoded with MIME base64

base64_encode — Encodes data with MIME base64

get_headers — Fetches all the headers sent by the server in response to a HTTP request

get_meta_tags — Extracts all meta tag content attributes from a file and returns an array

http_build_query — Generate URL-encoded query string

parse_url — Parse a URL and return its components

rawurldecode — Decode URL-encoded strings

rawurlencode — URL-encode according to RFC 1738

urldecode — Decodes URL-encoded string

urlencode — URL-encodes string

CLXXI. Variables handling

debug_zval_dump — Dumps a string representation of an internal zend value to output

doubleval — Alias of floatval()

empty — Determine whether a variable is empty

floatval — Get float value of a variable

get_defined_vars — Returns an array of all defined variables

get_resource_type — Returns the resource type

gettype — Get the type of a variable

import_request_variables — Import GET/POST/Cookie variables into the global scope

intval — Get the integer value of a variable

is_array — Finds whether a variable is an array

is_binary — Finds whether a variable is a native binary string

is_bool — Finds out whether a variable is a boolean

is_buffer — Finds whether a variable is a native unicode or binary string

is_callable — Verify that the contents of a variable can be called as a function

is_double — Alias of is_float()

is_float — Finds whether the type of a variable is float

is_int — Find whether the type of a variable is integer

is_integer — Alias of is_int()

is_long — Alias of is_int()

is_null — Finds whether a variable is NULL

is_numeric — Finds whether a variable is a number or a numeric string

is_object — Finds whether a variable is an object

is_real — Alias of is_float()

is_resource — Finds whether a variable is a resource

is_scalar — Finds whether a variable is a scalar

is_string — Find whether the type of a variable is string

is_unicode — Finds whether a variable is a unicode string

isset — Determine whether a variable is set

print_r — Prints human-readable information about a variable

serialize — Generates a storable representation of a value

settype — Set the type of a variable

strval — Get string value of a variable

unserialize — Creates a PHP value from a stored representation

unset — Unset a given variable

var_dump — Dumps information about a variable

var_export — Outputs or returns a parsable string representation of a variable

CLXXII. Verisign Payflow Pro

pfpro_cleanup — Shuts down the Payflow Pro library

pfpro_init — Initialises the Payflow Pro library

pfpro_process_raw — Process a raw transaction with Payflow Pro

pfpro_process — Process a transaction with Payflow Pro

pfpro_version — Returns the version of the Payflow Pro software

CLXXIII. vpopmail

vpopmail_add_alias_domain_ex — Add alias to an existing virtual domain

vpopmail_add_alias_domain — Add an alias for a virtual domain

vpopmail_add_domain_ex — Add a new virtual domain

vpopmail_add_domain — Add a new virtual domain

vpopmail_add_user — Add a new user to the specified virtual domain

vpopmail_alias_add — Insert a virtual alias

vpopmail_alias_del_domain — Deletes all virtual aliases of a domain

vpopmail_alias_del — Deletes all virtual aliases of a user

vpopmail_alias_get_all — Get all lines of an alias for a domain

vpopmail_alias_get — Get all lines of an alias for a domain

vpopmail_auth_user — Attempt to validate a username/domain/password

vpopmail_del_domain_ex — Delete a virtual domain

vpopmail_del_domain — Delete a virtual domain

vpopmail_del_user — Delete a user from a virtual domain

vpopmail_error — Get text message for last vpopmail error

vpopmail_passwd — Change a virtual user's password

vpopmail_set_user_quota — Sets a virtual user's quota

CLXXIV. W32api

w32api_deftype — Defines a type for use with other w32api_functions

w32api_init_dtype — Creates an instance of the data type typename and fills it with the values passed

w32api_invoke_function — Invokes function funcname with the arguments passed after the function name

w32api_register_function — Registers function function_name from library with PHP

w32api_set_call_method — Sets the calling method used

CLXXV. WDDX

wddx_add_vars — Add variables to a WDDX packet with the specified ID

wddx_deserialize — Alias of wddx_unserialize()

wddx_packet_end — Ends a WDDX packet with the specified ID

wddx_packet_start — Starts a new WDDX packet with structure inside it

wddx_serialize_value — Serialize a single value into a WDDX packet

wddx_serialize_vars — Serialize variables into a WDDX packet

wddx_unserialize — Unserializes a WDDX packet

CLXXVI. win32ps

win32_ps_list_procs — List running processes

win32_ps_stat_mem — Stat memory utilization

win32_ps_stat_proc — Stat process

CLXXVII. win32service

win32_create_service — Creates a new service entry in the SCM database

win32_delete_service — Deletes a service entry from the SCM database

win32_get_last_control_message — Returns the last control message that was sent to this service

win32_query_service_status — Queries the status of a service

win32_set_service_status — Update the service status

win32_start_service_ctrl_dispatcher — Registers the script with the SCM, so that it can act as the service with the given name

win32_start_service — Starts a service

win32_stop_service — Stops a service

CLXXVIII. xattr

xattr_get — Get an extended attribute

xattr_list — Get a list of extended attributes

xattr_remove — Remove an extended attribute

xattr_set — Set an extended attribute

xattr_supported — Check if filesystem supports extended attributes

CLXXIX. xdiff

xdiff_file_diff_binary — Make binary diff of two files

xdiff_file_diff — Make unified diff of two files

xdiff_file_merge3 — Merge 3 files into one

xdiff_file_patch_binary — Patch a file with a binary diff

xdiff_file_patch — Patch a file with an unified diff

xdiff_string_diff_binary — Make binary diff of two strings

xdiff_string_diff — Make unified diff of two strings

xdiff_string_merge3 — Merge 3 strings into one

xdiff_string_patch_binary — Patch a string with a binary diff

xdiff_string_patch — Patch a string with an unified diff

CLXXX. XML

utf8_decode — Converts a string with ISO-8859-1 characters encoded with UTF-8 to single-byte ISO-8859-1

utf8_encode — Encodes an ISO-8859-1 string to UTF-8

xml_error_string — Get XML parser error string

xml_get_current_byte_index — Get current byte index for an XML parser

xml_get_current_column_number — Get current column number for an XML parser

xml_get_current_line_number — Get current line number for an XML parser

xml_get_error_code — Get XML parser error code

xml_parse_into_struct — Parse XML data into an array structure

xml_parse — Start parsing an XML document

xml_parser_create_ns — Create an XML parser with namespace support

xml_parser_create — Create an XML parser

xml_parser_free — Free an XML parser

xml_parser_get_option — Get options from an XML parser

xml_parser_set_option — Set options in an XML parser

xml_set_character_data_handler — Set up character data handler

xml_set_default_handler — Set up default handler

xml_set_element_handler — Set up start and end element handlers

xml_set_end_namespace_decl_handler — Set up end namespace declaration handler

xml_set_external_entity_ref_handler — Set up external entity reference handler

xml_set_notation_decl_handler — Set up notation declaration handler

xml_set_object — Use XML Parser within an object

xml_set_processing_instruction_handler — Set up processing instruction (PI) handler

xml_set_start_namespace_decl_handler — Set up start namespace declaration handler

xml_set_unparsed_entity_decl_handler — Set up unparsed entity declaration handler

CLXXXI. XML-RPC

xmlrpc_decode_request — Decodes XML into native PHP types

xmlrpc_decode — Decodes XML into native PHP types

xmlrpc_encode_request — Generates XML for a method request

xmlrpc_encode — Generates XML for a PHP value

xmlrpc_get_type — Gets xmlrpc type for a PHP value

xmlrpc_is_fault — Determines if an array value represents an XMLRPC fault

xmlrpc_parse_method_descriptions — Decodes XML into a list of method descriptions

xmlrpc_server_add_introspection_data — Adds introspection documentation

xmlrpc_server_call_method — Parses XML requests and call methods

xmlrpc_server_create — Creates an xmlrpc server

xmlrpc_server_destroy — Destroys server resources

xmlrpc_server_register_introspection_callback — Register a PHP function to generate documentation

xmlrpc_server_register_method — Register a PHP function to resource method matching method_name

xmlrpc_set_type — Sets xmlrpc type, base64 or datetime, for a PHP string value

CLXXXII. XMLReader

XMLReader::close — Close the XMLReader input

XMLReader::expand — Returns a copy of the current node as a DOM object

XMLReader::getAttribute — Get the value of a named attribute

XMLReader::getAttributeNo — Get the value of an attribute by index

XMLReader::getAttributeNs — Get the value of an attribute by localname and URI

XMLReader::getParserProperty — Indicates if specified property has been set

XMLReader::isValid — Indicates if the parsed document is valid

XMLReader::lookupNamespace — Lookup namespace for a prefix

XMLReader::moveToAttribute — Move cursor to a named attribute

XMLReader::moveToAttributeNo — Move cursor to an attribute by index

XMLReader::moveToAttributeNs — Move cursor to a named attribute

XMLReader::moveToElement — Position cursor on the parent Element of current Attribute

XMLReader::moveToFirstAttribute — Position cursor on the first Attribute

XMLReader::moveToNextAttribute — Position cursor on the next Attribute

XMLReader::next — Move cursor to next node skipping all subtrees

XMLReader::open — Set the URI containing the XML to parse

XMLReader::read — Move to next node in document

XMLReader::setParserProperty — Set or Unset parser options

XMLReader::setRelaxNGSchema — Set the filename or URI for a RelaxNG Schema

XMLReader::setRelaxNGSchemaSource — Set the data containing a RelaxNG Schema

XMLReader::XML — Set the data containing the XML to parse

CLXXXIII. XMLWriter

XMLWriter::endAttribute — End attribute

XMLWriter::endCData — End current CDATA

XMLWriter::endComment — Create end comment

XMLWriter::endDocument — End current document

XMLWriter::endDTDAttlist — End current DTD AttList

XMLWriter::endDTDElement — End current DTD element

XMLWriter::endDTDEntity — End current DTD Entity

XMLWriter::endDTD — End current DTD

XMLWriter::endElement — End current element

XMLWriter::endPI — End current PI

XMLWriter::flush — Flush current buffer

XMLWriter::fullEndElement — End current element

XMLWriter::openMemory — Create new xmlwriter using memory for string output

XMLWriter::openURI — Create new xmlwriter using source uri for output

XMLWriter::outputMemory — Returns current buffer

XMLWriter::setIndentString — Set string used for indenting

XMLWriter::setIndent — Toggle indentation on/off

XMLWriter::startAttributeNS — Create start namespaced attribute

XMLWriter::startAttribute — Create start attribute

XMLWriter::startCData — Create start CDATA tag

XMLWriter::startComment — Create start comment

XMLWriter::startDocument — Create document tag

XMLWriter::startDTDAttlist — Create start DTD AttList

XMLWriter::startDTDElement — Create start DTD element

XMLWriter::startDTDEntity — Create start DTD Entity

XMLWriter::startDTD — Create start DTD tag

XMLWriter::startElementNS — Create start namespaced element tag

XMLWriter::startElement — Create start element tag

XMLWriter::startPI — Create start PI tag

XMLWriter::text — Write text

XMLWriter::writeAttributeNS — Write full namespaced attribute

XMLWriter::writeAttribute — Write full attribute

XMLWriter::writeCData — Write full CDATA tag

XMLWriter::writeComment — Write full comment tag

XMLWriter::writeDTDAttlist — Write full DTD AttList tag

XMLWriter::writeDTDElement — Write full DTD element tag

XMLWriter::writeDTDEntity — Write full DTD Entity tag

XMLWriter::writeDTD — Write full DTD tag

XMLWriter::writeElementNS — Write full namesapced element tag

XMLWriter::writeElement — Write full element tag

XMLWriter::writePI — Writes a PI

XMLWriter::writeRaw — Write a raw XML text

CLXXXIV. XSL

XSLTProcessor::__construct — Creates a new XSLTProcessor object

XSLTProcessor::getParameter — Get value of a parameter

XSLTProcessor::hasExsltSupport — Determine if PHP has EXSLT support

XSLTProcessor::importStylesheet — Import stylesheet

XSLTProcessor::registerPHPFunctions — Enables the ability to use PHP functions as XSLT functions

XSLTProcessor::removeParameter — Remove parameter

XSLTProcessor::setParameter — Set value for a parameter

XSLTProcessor::transformToDoc — Transform to a DOMDocument

XSLTProcessor::transformToURI — Transform to URI

XSLTProcessor::transformToXML — Transform to XML

CLXXXV. XSLT

xslt_backend_info — Returns the information on the compilation settings of the backend

xslt_backend_name — Returns the name of the backend

xslt_backend_version — Returns the version number of Sablotron

xslt_create — Create a new XSLT processor

xslt_errno — Returns an error number

xslt_error — Returns an error string

xslt_free — Free XSLT processor

xslt_getopt — Get options on a given xsl processor

xslt_process — Perform an XSLT transformation

xslt_set_base — Set the base URI for all XSLT transformations

xslt_set_encoding — Set the encoding for the parsing of XML documents

xslt_set_error_handler — Set an error handler for a XSLT processor

xslt_set_log — Set the log file to write log messages to

xslt_set_object — Sets the object in which to resolve callback functions

xslt_set_sax_handler — Set SAX handlers for a XSLT processor

xslt_set_sax_handlers — Set the SAX handlers to be called when the XML document gets processed

xslt_set_scheme_handler — Set Scheme handlers for a XSLT processor

xslt_set_scheme_handlers — Set the scheme handlers for the XSLT processor

xslt_setopt — Set options on a given xsl processor

CLXXXVI. YAZ

yaz_addinfo — Returns additional error information

yaz_ccl_conf — Configure CCL parser

yaz_ccl_parse — Invoke CCL Parser

yaz_close — Close YAZ connection

yaz_connect — Prepares for a connection to a Z39.50 server

yaz_database — Specifies the databases within a session

yaz_element — Specifies Element-Set Name for retrieval

yaz_errno — Returns error number

yaz_error — Returns error description

yaz_es_result — Inspects Extended Services Result

yaz_es — Prepares for an Extended Service Request

yaz_get_option — Returns value of option for connection

yaz_hits — Returns number of hits for last search

yaz_itemorder — Prepares for Z39.50 Item Order with an ILL-Request package

yaz_present — Prepares for retrieval (Z39.50 present)

yaz_range — Specifies a range of records to retrieve

yaz_record — Returns a record

yaz_scan_result — Returns Scan Response result

yaz_scan — Prepares for a scan

yaz_schema — Specifies schema for retrieval

yaz_search — Prepares for a search

yaz_set_option — Sets one or more options for connection

yaz_sort — Sets sorting criteria

yaz_syntax — Specifies the preferred record syntax for retrieval

yaz_wait — Wait for Z39.50 requests to complete

CLXXXVII. YP/NIS

yp_all — Traverse the map and call a function on each entry

yp_cat — Return an array containing the entire map

yp_err_string — Returns the error string associated with the given error code

yp_errno — Returns the error code of the previous operation

yp_first — Returns the first key-value pair from the named map

yp_get_default_domain — Fetches the machine's default NIS domain

yp_master — Returns the machine name of the master NIS server for a map

yp_match — Returns the matched line

yp_next — Returns the next key-value pair in the named map

yp_order — Returns the order number for a map

CLXXXVIII. Zip

zip_close — Close a ZIP file archive

zip_entry_close — Close a directory entry

zip_entry_compressedsize — Retrieve the compressed size of a directory entry

zip_entry_compressionmethod — Retrieve the compression method of a directory entry

zip_entry_filesize — Retrieve the actual file size of a directory entry

zip_entry_name — Retrieve the name of a directory entry

zip_entry_open — Open a directory entry for reading

zip_entry_read — Read from an open directory entry

zip_open — Open a ZIP file archive

zip_read — Read next entry in a ZIP file archive

ZipArchive::addEmptyDir — Add a new directory

ZipArchive::addFile — Adds a file to a ZIP archive from the given path

ZipArchive::addFromString — Add a file to a ZIP archive using its contents

ZipArchive::close — Close the active archive (opened or newly created)

ZipArchive::deleteIndex — delete an entry in the archive using its index

ZipArchive::deleteName — delete an entry in the archive using its name

ZipArchive::extractTo — Extract the archive contents

ZipArchive::getArchiveComment — Returns the Zip archive comment

ZipArchive::getCommentIndex — Returns the comment of an entry using the entry index

ZipArchive::getCommentName — Returns the comment of an entry using the entry name

ZipArchive::getFromIndex — Returns the entry contents using its index.

ZipArchive::getFromName — Returns the entry contents using its name.

ZipArchive::getNameIndex — Returns the name of an entry using its index

ZipArchive::getStream — Get a file handler to the entry defined by its name (read only).

ZipArchive::locateName — Returns the index of the entry in the archive

ZipArchive::open — Open a ZIP file archive

ZipArchive::renameIndex — Renames an entry defined by its index

ZipArchive::renameName — Renames an entry defined by its name

ZipArchive::setArchiveComment — Set the comment of a ZIP archive

ZipArchive::setCommentIndex — Set the comment of an entry defined by its index

ZipArchive::setCommentName — Set the comment of an entry defined by its name

ZipArchive::statIndex — Get the details of an entry defined by its index.

ZipArchive::statName — Get the details of an entry defined by its name.

ZipArchive::unchangeAll — Undo all changes done in the archive.

ZipArchive::unchangeArchive — Revert all global changes done in the archive.

ZipArchive::unchangeIndex — Revert all changes done to an entry at the given index.

ZipArchive::unchangeName — Revert all changes done to an entry with the given name.

CLXXXIX. Zlib

gzclose — Close an open gz-file pointer

gzcompress — Compress a string

gzdecode — Decodes a gzip compressed string

gzdeflate — Deflate a string

gzencode — Create a gzip compressed string

gzeof — Test for end-of-file on a gz-file pointer

gzfile — Read entire gz-file into an array

gzgetc — Get character from gz-file pointer

gzgets — Get line from file pointer

gzgetss — Get line from gz-file pointer and strip HTML tags

gzinflate — Inflate a deflated string

gzopen — Open gz-file

gzpassthru — Output all remaining data on a gz-file pointer

gzputs — Alias of gzwrite()

gzread — Binary-safe gz-file read

gzrewind — Rewind the position of a gz-file pointer

gzseek — Seek on a gz-file pointer

gztell — Tell gz-file pointer read/write position

gzuncompress — Uncompress a compressed string

gzwrite — Binary-safe gz-file write

readgzfile — Output a gz-file

zlib_get_coding_type — Returns the coding type used for output compression